From: "mirela.rabulea@oss.nxp.com" <mirela.rabulea@oss.nxp.com>
To: Ming Qian <ming.qian@nxp.com>,
mchehab@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: hverkuil-cisco@xs4all.nl, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
Date: Thu, 10 Feb 2022 14:01:19 +0200 [thread overview]
Message-ID: <8ee6981e-9d75-038c-578b-e15b580ec63e@oss.nxp.com> (raw)
In-Reply-To: <20220210054601.5889-1-ming.qian@nxp.com>
Hi Ming,
thanks for the description update.
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Regards,
Mirela
On 10.02.2022 07:46, Ming Qian wrote:
> The V4L2_EVENT_EOS event is a deprecated behavior,
> the V4L2_BUF_FLAG_LAST buffer flag should be used instead.
>
> Signed-off-by: Ming Qian <ming.qian@nxp.com>
> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> ---
> drivers/media/platform/imx-jpeg/mxc-jpeg.c | 39 ++++++++++++++++++++--
> drivers/media/platform/imx-jpeg/mxc-jpeg.h | 1 +
> 2 files changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
> index 86d37d14cfe2..3c50c572d6b0 100644
> --- a/drivers/media/platform/imx-jpeg/mxc-jpeg.c
> +++ b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
> @@ -991,6 +991,20 @@ static void mxc_jpeg_device_run(void *priv)
> spin_unlock_irqrestore(&ctx->mxc_jpeg->hw_lock, flags);
> }
>
> +static void mxc_jpeg_set_last_buffer_dequeued(struct mxc_jpeg_ctx *ctx)
> +{
> + struct vb2_queue *q;
> +
> + ctx->stopped = 1;
> + q = v4l2_m2m_get_dst_vq(ctx->fh.m2m_ctx);
> + if (!list_empty(&q->done_list))
> + return;
> +
> + q->last_buffer_dequeued = true;
> + wake_up(&q->done_wq);
> + ctx->stopped = 0;
> +}
> +
> static int mxc_jpeg_decoder_cmd(struct file *file, void *priv,
> struct v4l2_decoder_cmd *cmd)
> {
> @@ -1008,6 +1022,7 @@ static int mxc_jpeg_decoder_cmd(struct file *file, void *priv,
> if (v4l2_m2m_num_src_bufs_ready(fh->m2m_ctx) == 0) {
> /* No more src bufs, notify app EOS */
> notify_eos(ctx);
> + mxc_jpeg_set_last_buffer_dequeued(ctx);
> } else {
> /* will send EOS later*/
> ctx->stopping = 1;
> @@ -1034,6 +1049,7 @@ static int mxc_jpeg_encoder_cmd(struct file *file, void *priv,
> if (v4l2_m2m_num_src_bufs_ready(fh->m2m_ctx) == 0) {
> /* No more src bufs, notify app EOS */
> notify_eos(ctx);
> + mxc_jpeg_set_last_buffer_dequeued(ctx);
> } else {
> /* will send EOS later*/
> ctx->stopping = 1;
> @@ -1110,6 +1126,8 @@ static void mxc_jpeg_stop_streaming(struct vb2_queue *q)
> v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> }
> pm_runtime_put_sync(&ctx->mxc_jpeg->pdev->dev);
> + ctx->stopping = 0;
> + ctx->stopped = 0;
> }
>
> static int mxc_jpeg_valid_comp_id(struct device *dev,
> @@ -1401,12 +1419,29 @@ static int mxc_jpeg_buf_prepare(struct vb2_buffer *vb)
> return 0;
> }
>
> +static void mxc_jpeg_buf_finish(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct mxc_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> + struct vb2_queue *q = vb->vb2_queue;
> +
> + if (V4L2_TYPE_IS_OUTPUT(vb->type))
> + return;
> + if (!ctx->stopped)
> + return;
> + if (list_empty(&q->done_list)) {
> + vbuf->flags |= V4L2_BUF_FLAG_LAST;
> + ctx->stopped = 0;
> + }
> +}
> +
> static const struct vb2_ops mxc_jpeg_qops = {
> .queue_setup = mxc_jpeg_queue_setup,
> .wait_prepare = vb2_ops_wait_prepare,
> .wait_finish = vb2_ops_wait_finish,
> .buf_out_validate = mxc_jpeg_buf_out_validate,
> .buf_prepare = mxc_jpeg_buf_prepare,
> + .buf_finish = mxc_jpeg_buf_finish,
> .start_streaming = mxc_jpeg_start_streaming,
> .stop_streaming = mxc_jpeg_stop_streaming,
> .buf_queue = mxc_jpeg_buf_queue,
> @@ -1842,14 +1877,14 @@ static int mxc_jpeg_dqbuf(struct file *file, void *priv,
> int ret;
>
> dev_dbg(dev, "DQBUF type=%d, index=%d", buf->type, buf->index);
> - if (ctx->stopping == 1 && num_src_ready == 0) {
> + if (ctx->stopping == 1 && num_src_ready == 0) {
> /* No more src bufs, notify app EOS */
> notify_eos(ctx);
> ctx->stopping = 0;
> + mxc_jpeg_set_last_buffer_dequeued(ctx);
> }
>
> ret = v4l2_m2m_dqbuf(file, fh->m2m_ctx, buf);
> -
> return ret;
> }
>
> diff --git a/drivers/media/platform/imx-jpeg/mxc-jpeg.h b/drivers/media/platform/imx-jpeg/mxc-jpeg.h
> index 9fb2a5aaa941..f53f004ba851 100644
> --- a/drivers/media/platform/imx-jpeg/mxc-jpeg.h
> +++ b/drivers/media/platform/imx-jpeg/mxc-jpeg.h
> @@ -91,6 +91,7 @@ struct mxc_jpeg_ctx {
> struct v4l2_fh fh;
> enum mxc_jpeg_enc_state enc_state;
> unsigned int stopping;
> + unsigned int stopped;
> unsigned int slot;
> };
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-02-10 12:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 5:46 [PATCH v2] media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos Ming Qian
2022-02-10 12:01 ` mirela.rabulea [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8ee6981e-9d75-038c-578b-e15b580ec63e@oss.nxp.com \
--to=mirela.rabulea@oss.nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ming.qian@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).