From mboxrd@z Thu Jan 1 00:00:00 1970 From: hoegeun.kwon@samsung.com (Hoegeun Kwon) Date: Tue, 01 Aug 2017 09:26:05 +0900 Subject: [PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board In-Reply-To: <1499912443-3671-1-git-send-email-hoegeun.kwon@samsung.com> References: <1499912443-3671-1-git-send-email-hoegeun.kwon@samsung.com> Message-ID: <90041545-2bce-52cc-d926-606f76d81f0f@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dear Thierry, Could you please check these patches. Best regards, Hoegeun On 07/13/2017 11:20 AM, Hoegeun Kwon wrote: > Hi Andrzej, > > Thank you for your review. > > The purpose of this patch is add support for s6e63j0x03 AMOLED panel > on the rinato board(Samsung Galaxy Gear 2). > > Changes for V4: > - Added Reviewed-by: Andrzej Hajda (2/3 patch). > - Fixed the style of macro function. > > Changes for V3: > - Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato dts' (v2 3/4) > - Remove the unnecessary define ('MIN_BRIGHTNESS') > - Removed explicit casting. > - Removed violation of kernel coding style. > > Changes for V2: > - Added the interface info in binding document. > - Added Reviewed-by: Andrzej Hajda (1/3 patch). > - Added Acked-by: Rob Herring (1/3 patch). > - Fixed the tristate of config from video mode to command mode. > - Fixed the reset gpios from active high to low from rinato dts. > - Fixed a lot of things in panel driver, reflect Andrzej's review. > > Best regards, > Hoegeun > > Hoegeun Kwon (3): > dt-bindings: Add support for samsung s6e63j0x03 panel binding > drm/panel: Add support for s6e63j0x03 panel driver > ARM: dts: exynos: Remove the display-timing and delay from rinato dts > > .../bindings/display/panel/samsung,s6e63j0x03.txt | 24 + > arch/arm/boot/dts/exynos3250-rinato.dts | 22 - > drivers/gpu/drm/panel/Kconfig | 7 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 532 +++++++++++++++++++++ > 5 files changed, 564 insertions(+), 22 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt > create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c >