From mboxrd@z Thu Jan 1 00:00:00 1970 From: cbostic@linux.vnet.ibm.com (Christopher Bostic) Date: Sun, 9 Apr 2017 16:06:28 -0500 Subject: [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver In-Reply-To: References: <20170405020607.79939-1-cbostic@linux.vnet.ibm.com> <20170405020607.79939-22-cbostic@linux.vnet.ibm.com> Message-ID: <90dac991-03db-614e-09f6-ab55b8db79be@linux.vnet.ibm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 4/5/17 11:35 AM, Randy Dunlap wrote: > On 04/04/17 19:06, Christopher Bostic wrote: >> From: Chris Bostic >> >> Create a simple SCOM engine device driver that reads and writes >> its control registers via an FSI bus. >> >> Includes changes from Edward A. James . >> >> Signed-off-by: Chris Bostic >> Signed-off-by: Joel Stanley >> Signed-off-by: Edward A. James >> Signed-off-by: Jeremy Kerr >> --- >> drivers/fsi/Kconfig | 6 ++ >> drivers/fsi/Makefile | 1 + >> drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 270 insertions(+) >> create mode 100644 drivers/fsi/fsi-scom.c >> >> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig >> index 9cf8345..0fa265c 100644 >> --- a/drivers/fsi/Kconfig >> +++ b/drivers/fsi/Kconfig >> @@ -18,6 +18,12 @@ config FSI_MASTER_GPIO >> ---help--- >> This option enables a FSI master driver using GPIO lines. >> >> +config FSI_SCOM >> + tristate "SCOM FSI client device driver" >> + depends on FSI > depends on FSI is redundant. Will correct. Thanks, Chris > >> + ---help--- >> + This option enables an FSI based SCOM device driver. >> + >> endif >> >