From mboxrd@z Thu Jan 1 00:00:00 1970 From: vigneshr@ti.com (Vignesh R) Date: Tue, 4 Sep 2018 20:52:40 +0530 Subject: [PATCH v2] arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2 In-Reply-To: <20180904134142.npoxfimfsllmxdwb@akan> References: <20180903095235.13853-1-kishon@ti.com> <20180904134142.npoxfimfsllmxdwb@akan> Message-ID: <921e9705-1ac4-29fa-61bb-e6f4261b125e@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tuesday 04 September 2018 07:11 PM, Menon, Nishanth wrote: > On 15:22-20180903, Kishon Vijay Abraham I wrote: > >> AM65 has two PCIe controllers and each PCIe controller has '2' address >> spaces one within the 4GB address space of the SoC and the other above >> the 4GB address space of the SoC (cbass_main) in addition to the >> register space. The size of the address space above the 4GB SoC address >> space is 4GB. These address ranges will be used by CPU/DMA to access >> the PCIe address space. In order to represent the address space above >> the 4GB SoC address space and to represent the size of this address >> space as 4GB, change address-cells and size-cells of interconnect to 2. >> >> Since OSPI has similar need in MCU Domain Memory Map, change >> address-cells and size-cells of cbass_mcu interconnect also to 2. >> > > Please add Fixes > > Vignesh, Sekhar, Tony, > > Do we agree this is the right way to go forward? if yes, please > ack. > > LGTM, thanks kishon! Acked-by: Vignesh R -- Regards Vignesh