From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Wed, 1 Aug 2018 08:55:00 +0200 Subject: [PATCH v6 0/4] IR support for A83T In-Reply-To: <20180731123452.74jyxc4q3ewig35z@flea> References: <20180731092258.2279-1-embed3d@gmail.com> <20180731123452.74jyxc4q3ewig35z@flea> Message-ID: <92b74230-285e-74c3-c89a-e194a8eabc52@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Thanks, I will fix this today. Philipp On 31.07.2018 14:34, Maxime Ripard wrote: > On Tue, Jul 31, 2018 at 11:22:54AM +0200, Philipp Rossak wrote: >> This patch series adds support for the sunxi A83T ir module and enhances >> the sunxi-ir driver. Right now the base clock frequency for the ir driver >> is a hard coded define and is set to 8 MHz. >> This works for the most common ir receivers. On the Sinovoip Bananapi M3 >> the ir receiver needs, a 3 MHz base clock frequency to work without >> problems with this driver. >> >> This patch series adds support for an optinal property that makes it able >> to override the default base clock frequency and enables the ir interface >> on the a83t and the Bananapi M3. > > Once the minor comment on patch 2 has been fixed, > Acked-by: Maxime Ripard > > Maxime >