linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Qu Wenruo <wqu@suse.com>
To: Alexandru Elisei <alexandru.elisei@arm.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-rockchip@lists.infradead.org,
	arm-mail-list <linux-arm-kernel@lists.infradead.org>,
	heiko.stuebner@theobroma-systems.com, leobras.c@gmail.com,
	Rob Herring <robh@kernel.org>
Subject: Re: [BUG] rockpro64: PCI BAR reassignment broken by commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Date: Wed, 19 May 2021 15:05:48 +0800	[thread overview]
Message-ID: <94fbb521-d045-3c2e-eeb8-4029e1f92015@suse.com> (raw)
In-Reply-To: <09cbf655-0f13-5df6-b6a9-4a6a784e211d@suse.com>



On 2021/5/19 下午2:28, Qu Wenruo wrote:
> 
> 
> On 2021/5/18 下午5:09, Alexandru Elisei wrote:
>> After doing a git bisect I was able to trace the following error when 
>> booting my
>> rockpro64 v2 (rk3399 SoC) with a PCIE NVME expansion card:
> 
> I'm also hitting the same problem, with a RockPi 4B board.
> 
> [...]
>> [    0.393269] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated 
>> to 01
>> [    0.393311] pci 0000:00:00.0: BAR 14: no space for [mem size 
>> 0x00100000]
>> [    0.393333] pci 0000:00:00.0: BAR 14: failed to assign [mem size 
>> 0x00100000]
>> [    0.393356] pci 0000:01:00.0: BAR 0: no space for [mem size 
>> 0x00004000 64bit]
>> [    0.393375] pci 0000:01:00.0: BAR 0: failed to assign [mem size 
>> 0x00004000 64bit]
> 
> The same error here.
> 
>> [    0.393397] pci 0000:00:00.0: PCI bridge to [bus 01]
>> [    0.393839] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
>> [    0.394165] pcieport 0000:00:00.0: AER: enabled with IRQ 78
>> [..]
>>
>> to the commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource 
>> flags for
>> 64-bit memory addresses"). For reference, here is the dmesg output 
>> when BAR
>> reassignment works:
> 
> Great thanks for the pinning down the bug, at least I can try to boot my 
> board again with the patch reverted.

Although after reverting, the kernel just BUG_ON() when alternatives try 
to patch the kernel:

[    0.175009] alternatives: patching kernel code
[    0.175640] ------------[ cut here ]------------
[    0.176260] kernel BUG at arch/arm64/kernel/alternative.c:157!
[    0.177080] Internal error: Oops - BUG: 0 [#1] SMP
[    0.177579] Modules linked in:
[    0.177910] CPU: 0 PID: 12 Comm: migration/0 Not tainted 
5.13.0-rc2-custom+ #11
[    0.178665] Hardware name: Radxa ROCK Pi 4B (DT)
[    0.179137] Stopper: multi_cpu_stop+0x0/0x1bc <- 
stop_cpus.constprop.0+0x98/0xf0
[    0.179927] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO BTYPE=--)
[    0.180546] pc : __apply_alternatives+0x21c/0x254
[    0.181047] lr : __apply_alternatives+0x100/0x254
[    0.181538] sp : ffff800012b0fca0
[    0.181883] x29: ffff800012b0fca0 x28: ffff800010011128 x27: 
ffff80001001112c
[    0.182633] x26: ffff8000114dfec4 x25: 00000000001b0020 x24: 
ffff800011212368
[    0.183377] x23: 0000000000000000 x22: ffff800011b041e6 x21: 
ffff800012b0fd20
[    0.184125] x20: ffff800012b0fd30 x19: ffff8000114dfec8 x18: 
0000000000000030
[    0.184872] x17: 0000000025e8361a x16: 000000004a78ba60 x15: 
ffff0000020e1cd0
[    0.185623] x14: ffff8000118dc548 x13: 0000000000000000 x12: 
000000000000016b
[    0.186370] x11: 0000000000000079 x10: ffff80001198c548 x9 : 
00000000ffffe000
[    0.187115] x8 : 80000000ffffe000 x7 : ffff8000118dc548 x6 : 
0000000000005ffd
[    0.187861] x5 : 0000000000000000 x4 : ffff8000100242b0 x3 : 
ffffffffffffffc0
[    0.188606] x2 : ffff8000114fbb54 x1 : 0000000000000004 x0 : 
0000000000000000
[    0.189353] Call trace:
[    0.189612]  __apply_alternatives+0x21c/0x254
[    0.190073]  __apply_alternatives_multi_stop+0xc4/0xdc
[    0.190610]  multi_cpu_stop+0xa8/0x1bc
[    0.191007]  cpu_stopper_thread+0xb0/0x144
[    0.191439]  smpboot_thread_fn+0x130/0x240
[    0.191884]  kthread+0x13c/0x140
[    0.192226]  ret_from_fork+0x10/0x30
[    0.192616] Code: aa1c03e1 aa1a03e0 97ffff27 17ffffb8 (d4210000)
[    0.193268] ---[ end trace d8c66e3e26751651 ]---
[    0.193746] Kernel panic - not syncing: Oops - BUG: Fatal exception
[    0.194395] SMP: stopping secondary CPUs
[    1.361467] SMP: failed to stop secondary CPUs 0-5
[    1.361980] Rebooting in 5 seconds..
[    6.362979] SMP: stopping secondary CPUs
[    7.530049] SMP: failed to stop secondary CPUs 0-5

Is there anything special needed to boot the kernel with that offending 
commit reverted?

Thanks,
Qu

> 
> Thanks,
> Qu
> 
>>
>> [..]
>> [    0.307381] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 
>> ranges:
>> [    0.307445] rockchip-pcie f8000000.pcie:      MEM 
>> 0x00fa000000..0x00fbdfffff ->
>> 0x00fa000000
>> [    0.307481] rockchip-pcie f8000000.pcie:       IO 
>> 0x00fbe00000..0x00fbefffff ->
>> 0x00fbe00000
>> [    0.308406] rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, 
>> using dummy
>> regulator
>> [    0.308534] rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, 
>> using dummy
>> regulator
>> [    0.374676] rockchip-pcie f8000000.pcie: PCI host bridge to bus 
>> 0000:00
>> [    0.374701] pci_bus 0000:00: root bus resource [bus 00-1f]
>> [    0.374723] pci_bus 0000:00: root bus resource [mem 
>> 0xfa000000-0xfbdfffff]
>> [    0.374746] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] 
>> (bus
>> address [0xfbe00000-0xfbefffff])
>> [    0.374808] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
>> [    0.374943] pci 0000:00:00.0: supports D1
>> [    0.374961] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
>> [    0.379473] pci 0000:00:00.0: bridge configuration invalid ([bus 
>> 00-00]),
>> reconfiguring
>> [    0.379712] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
>> [    0.379815] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 
>> 64bit]
>> [    0.379997] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, 
>> max 256)
>> [    0.380607] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, 
>> limited by
>> 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 
>> GT/s PCIe
>> x4 link)
>> [    0.394239] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated 
>> to 01
>> [    0.394285] pci 0000:00:00.0: BAR 14: assigned [mem 
>> 0xfa000000-0xfa0fffff]
>> [    0.394312] pci 0000:01:00.0: BAR 0: assigned [mem 
>> 0xfa000000-0xfa003fff 64bit]
>> [    0.394374] pci 0000:00:00.0: PCI bridge to [bus 01]
>> [    0.394395] pci 0000:00:00.0:   bridge window [mem 
>> 0xfa000000-0xfa0fffff]
>> [    0.394569] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
>> [    0.394845] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
>> [    0.395153] pcieport 0000:00:00.0: AER: enabled with IRQ 78
>> [..]
>>
>> And here is the output of lspci when BAR reassignment works:
>>
>> # lspci -v
>> 00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd RK3399 PCI 
>> Express Root
>> Port (prog-if 00 [Normal decode])
>>      Flags: bus master, fast devsel, latency 0, IRQ 78
>>      Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>>      I/O behind bridge: 00000000-00000fff [size=4K]
>>      Memory behind bridge: fa000000-fa0fffff [size=1M]
>>      Prefetchable memory behind bridge: 00000000-000fffff [size=1M]
>>      Capabilities: [80] Power Management version 3
>>      Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+
>>      Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
>>      Capabilities: [c0] Express Root Port (Slot+), MSI 00
>>      Capabilities: [100] Advanced Error Reporting
>>      Capabilities: [274] Transaction Processing Hints
>>      Kernel driver in use: pcieport
>> lspci: Unable to load libkmod resources: error -2
>>
>> 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd 
>> NVMe SSD
>> Controller SM981/PM981/PM983 (prog-if 02 [NVM Express])
>>      Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller 
>> SM981/PM981/PM983
>>      Flags: bus master, fast devsel, latency 0, IRQ 77, NUMA node 0
>>      Memory at fa000000 (64-bit, non-prefetchable) [size=16K]
>>      Capabilities: [40] Power Management version 3
>>      Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>      Capabilities: [70] Express Endpoint, MSI 00
>>      Capabilities: [b0] MSI-X: Enable+ Count=33 Masked-
>>      Capabilities: [100] Advanced Error Reporting
>>      Capabilities: [148] Device Serial Number 00-00-00-00-00-00-00-00
>>      Capabilities: [158] Power Budgeting <?>
>>      Capabilities: [168] Secondary PCI Express
>>      Capabilities: [188] Latency Tolerance Reporting
>>      Capabilities: [190] L1 PM Substates
>>      Kernel driver in use: nvme
>>
>> I can provide more information if needed (the board is sitting on my 
>> desk) and I
>> can help with testing the fix.
>>
>> Thanks,
>>
>> Alex
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-05-19  7:08 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-18  9:09 [BUG] rockpro64: PCI BAR reassignment broken by commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses") Alexandru Elisei
2021-05-19  6:28 ` Qu Wenruo
2021-05-19  7:05   ` Qu Wenruo [this message]
2021-05-19  9:20     ` Alexandru Elisei
2021-05-19 11:16       ` Qu Wenruo
2021-05-19 11:27 ` Robin Murphy
2021-05-19 13:17   ` Peter Geis
2021-05-23 11:03   ` Punit Agrawal
2021-05-23 12:10     ` Ard Biesheuvel
2021-05-25 13:42       ` Punit Agrawal
2021-05-25 13:54         ` Ard Biesheuvel
2021-05-25 15:34           ` Peter Geis
2021-05-25 15:54             ` Ard Biesheuvel
2021-05-25 16:23               ` Peter Geis
2021-05-25 16:44                 ` Ard Biesheuvel
2021-05-25 17:01                   ` Peter Geis
2021-05-25 17:18                     ` Ard Biesheuvel
2021-05-25 17:37                       ` Peter Geis
2021-05-26 13:55                       ` Christian König
2021-05-26 14:15                         ` Ard Biesheuvel
2021-05-25 17:25                     ` Robin Murphy
2021-05-25 17:34                       ` Peter Geis
2021-05-25 18:55                         ` Robin Murphy
2021-05-25 19:15               ` Bjorn Helgaas
2021-05-25 19:43                 ` Ard Biesheuvel
2021-05-25 20:03                   ` Peter Geis
2021-05-26 14:18                     ` Ard Biesheuvel
2021-05-25 16:59           ` Anand Moon
2021-05-25 17:14             ` Robin Murphy
2021-05-25 17:42               ` Peter Geis
2021-05-25 22:36           ` Punit Agrawal
2021-05-26 15:37           ` Rob Herring
2021-05-26 16:35             ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94fbb521-d045-3c2e-eeb8-4029e1f92015@suse.com \
    --to=wqu@suse.com \
    --cc=alexandru.elisei@arm.com \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=leobras.c@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).