From mboxrd@z Thu Jan 1 00:00:00 1970 From: kieran.bingham+renesas@ideasonboard.com (Kieran Bingham) Date: Fri, 27 Apr 2018 22:40:33 +0100 Subject: [PATCH v2 11/11] arm64: dts: r8a77965-salvator-xs: Enable DU external clocks and HDMI In-Reply-To: <35470587.gVktJpfmq0@avalon> References: <20180427165722.19445-1-kieran.bingham+renesas@ideasonboard.com> <20180427165722.19445-12-kieran.bingham+renesas@ideasonboard.com> <35470587.gVktJpfmq0@avalon> Message-ID: <9566c920-daf7-e470-4552-309f6082524b@ideasonboard.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Laurent, On 27/04/18 22:32, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Friday, 27 April 2018 19:57:22 EEST Kieran Bingham wrote: >> The DU1 external dot clock is provided by the fixed frequency clock >> generator X21, while the DU0 and DU3 clocks are provided by the >> programmable Versaclock6 clock generator. >> >> Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and >> hook it up to the HDMI connector >> >> Based on patches from Takeshi Kihara >> >> Signed-off-by: Kieran Bingham >> --- >> .../boot/dts/renesas/r8a77965-salvator-xs.dts | 29 +++++++++++++++++++ >> 1 file changed, 29 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts >> b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index >> a83a00deed9e..dcf1849f1a67 100644 >> --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts >> +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts >> @@ -19,3 +19,32 @@ >> reg = <0x0 0x48000000 0x0 0x78000000>; >> }; >> }; >> + >> +&du { >> + clocks = <&cpg CPG_MOD 724>, >> + <&cpg CPG_MOD 723>, >> + <&cpg CPG_MOD 721>, >> + <&cpg CPG_MOD 727>, >> + <&versaclock6 1>, >> + <&x21_clk>, >> + <&versaclock6 2>; >> + clock-names = "du.0", "du.1", "du.3", "lvds.0", >> + "dclkin.0", "dclkin.1", "dclkin.3"; > > You should remove the LVDS clock from here too. Aha, I missed one - thanks. > > Apart from that, > > Reviewed-by: Laurent Pinchart Collected. Thanks. > >> +}; >> + >> +&hdmi0 { >> + status = "okay"; >> + >> + ports { >> + port at 1 { >> + reg = <1>; >> + rcar_dw_hdmi0_out: endpoint { >> + remote-endpoint = <&hdmi0_con>; >> + }; >> + }; >> + }; >> +}; >> + >> +&hdmi0_con { >> + remote-endpoint = <&rcar_dw_hdmi0_out>; >> +}; >