linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3
@ 2025-06-12 18:50 Dan Carpenter
  2025-06-12 18:50 ` [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2 Dan Carpenter
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Dan Carpenter @ 2025-06-12 18:50 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Conor Dooley, devicetree, Fabio Estevam, imx, Krzysztof Kozlowski,
	linux-arm-kernel, linux-kernel, linux-usb, Peng Fan,
	Pengutronix Kernel Team, Peter Chen, Rob Herring, Sascha Hauer,
	Shawn Guo, Xu Yang, s32, linaro-s32, Larisa Grigore,
	Ionut Vicovan, Ghennadi Procopciuc

This patchset adds support for the s32g2 and s32g3 chips.

The changes since v1:
* Put the device tree lines in alphabetical order.
* Add imx@lists.linux.dev to the CC list.
* Use power_lost_check() instead of creating a new REINIT_DURING_RESUME
  flag.
* Change the Copyright date.
* Leave the .compatible = "nxp,s32g3-usb" out of the ci_hdrc_imx.c
  driver because people can just specify both in the devicetree
  since they are compatible.

Ghennadi Procopciuc (3):
  dt-bindings: usb: Add compatible strings for s32g2/s32g3
  usb: chipidea: s32g: Add usb support for s32g2
  usb: chipidea: s32g: Add usb support for s32g3

 .../devicetree/bindings/usb/ci-hdrc-usb2.yaml |  2 +
 .../devicetree/bindings/usb/fsl,usbmisc.yaml  |  2 +
 drivers/usb/chipidea/ci_hdrc_imx.c            |  6 ++
 drivers/usb/chipidea/usbmisc_imx.c            | 89 +++++++++++++++++++
 4 files changed, 99 insertions(+)

-- 
2.47.2



^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2
  2025-06-12 18:50 [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Dan Carpenter
@ 2025-06-12 18:50 ` Dan Carpenter
  2025-06-13 14:53   ` Frank Li
  2025-06-12 18:51 ` [PATCH 3/3 v2] usb: chipidea: s32g: Add usb support for s32g3 Dan Carpenter
  2025-06-13 14:50 ` [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Frank Li
  2 siblings, 1 reply; 5+ messages in thread
From: Dan Carpenter @ 2025-06-12 18:50 UTC (permalink / raw)
  To: Peter Chen
  Cc: Greg Kroah-Hartman, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, linux-usb, imx,
	linux-arm-kernel, linux-kernel, Krzysztof Kozlowski, s32,
	linaro-s32, Larisa Grigore, Ionut Vicovan, Ghennadi Procopciuc

From: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

Enable USB driver for s32g2.  This chip has an errata ERR050474,
so we need to set S32G_UCMALLBE for it to handle packages which
aren't 4 byte aligned correctly.

Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
---
Changes since v1:
* Update the copyright
* Use the .power_lost_check callback.

 drivers/usb/chipidea/ci_hdrc_imx.c |  6 +++
 drivers/usb/chipidea/usbmisc_imx.c | 74 ++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 780f4d151345..e8c847eab8e3 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2025 NXP
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
  * on behalf of DENX Software Engineering GmbH
  */
@@ -78,6 +79,10 @@ static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
 		CI_HDRC_HAS_PORTSC_PEC_MISSED,
 };
 
+static const struct ci_hdrc_imx_platform_flag s32g_usb_data = {
+	.flags = CI_HDRC_DISABLE_HOST_STREAMING,
+};
+
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
@@ -89,6 +94,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
 	{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
 	{ .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data},
+	{ .compatible = "nxp,s32g2-usb", .data = &s32g_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 118b9a68496b..67ff073ad806 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2025 NXP
  */
 
 #include <linux/module.h>
@@ -155,6 +156,18 @@
 					 BLKCTL_OTG_VBUS_WAKEUP_EN | \
 					 BLKCTL_OTG_DPDM_WAKEUP_EN)
 
+#define S32G_WAKEUP_IE		BIT(0)
+#define S32G_CORE_IE		BIT(1)
+#define S32G_PWRFLTEN		BIT(7)
+#define S32G_WAKEUPCTRL		BIT(10)
+#define S32G_WAKEUPEN		BIT(11)
+
+/* Workaround errata ERR050474 (handle packages that aren't 4 byte aligned) */
+#define S32G_UCMALLBE		BIT(15)
+
+#define S32G_WAKEUP_BITS (S32G_WAKEUP_IE | S32G_CORE_IE | S32G_WAKEUPEN | \
+			  S32G_WAKEUPCTRL)
+
 struct usbmisc_ops {
 	/* It's called once when probe a usb device */
 	int (*init)(struct imx_usbmisc_data *data);
@@ -614,6 +627,52 @@ static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_s32g_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	reg = readl(usbmisc->base);
+	if (enabled)
+		reg |= S32G_WAKEUP_BITS;
+	else
+		reg &= ~S32G_WAKEUP_BITS;
+
+	writel(reg, usbmisc->base);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_s32g_init(struct imx_usbmisc_data *data, u32 extra_flags)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	reg = readl(usbmisc->base);
+
+	reg |= S32G_PWRFLTEN;
+	reg |= extra_flags;
+
+	writel(reg, usbmisc->base);
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+	usbmisc_s32g_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int usbmisc_s32g2_init(struct imx_usbmisc_data *data)
+{
+	return usbmisc_s32g_init(data, S32G_UCMALLBE);
+}
+
 static int usbmisc_imx7d_set_wakeup
 	(struct imx_usbmisc_data *data, bool enabled)
 {
@@ -1033,6 +1092,11 @@ static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data)
 		return 0;
 }
 
+static int usbmisc_s32g_power_lost_check(struct imx_usbmisc_data *data)
+{
+	return 1;
+}
+
 static u32 usbmisc_blkctl_wakeup_setting(struct imx_usbmisc_data *data)
 {
 	u32 wakeup_setting = BLKCTL_WAKEUP_SOURCE;
@@ -1131,6 +1195,12 @@ static const struct usbmisc_ops imx95_usbmisc_ops = {
 	.vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
 };
 
+static const struct usbmisc_ops s32g2_usbmisc_ops = {
+	.init = usbmisc_s32g2_init,
+	.set_wakeup = usbmisc_s32g_set_wakeup,
+	.power_lost_check = usbmisc_s32g_power_lost_check,
+};
+
 static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -1356,6 +1426,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx95-usbmisc",
 		.data = &imx95_usbmisc_ops,
 	},
+	{
+		.compatible = "nxp,s32g2-usbmisc",
+		.data = &s32g2_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
-- 
2.47.2



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 3/3 v2] usb: chipidea: s32g: Add usb support for s32g3
  2025-06-12 18:50 [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Dan Carpenter
  2025-06-12 18:50 ` [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2 Dan Carpenter
@ 2025-06-12 18:51 ` Dan Carpenter
  2025-06-13 14:50 ` [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Frank Li
  2 siblings, 0 replies; 5+ messages in thread
From: Dan Carpenter @ 2025-06-12 18:51 UTC (permalink / raw)
  To: Peter Chen
  Cc: Greg Kroah-Hartman, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, linux-usb, imx,
	linux-arm-kernel, linux-kernel, Krzysztof Kozlowski, s32,
	linaro-s32, Larisa Grigore, Ionut Vicovan, Ghennadi Procopciuc

From: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

Enable USB driver for the s32g3 USB device.

Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
---
Changes since v1:
* Drop the changes to ci_hdrc_imx.c since that part is compatible with
  the s32g2 chip.
* Use the .power_lost_check() callback.

 drivers/usb/chipidea/usbmisc_imx.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 67ff073ad806..d5389156e157 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -673,6 +673,11 @@ static int usbmisc_s32g2_init(struct imx_usbmisc_data *data)
 	return usbmisc_s32g_init(data, S32G_UCMALLBE);
 }
 
+static int usbmisc_s32g3_init(struct imx_usbmisc_data *data)
+{
+	return usbmisc_s32g_init(data, 0);
+}
+
 static int usbmisc_imx7d_set_wakeup
 	(struct imx_usbmisc_data *data, bool enabled)
 {
@@ -1201,6 +1206,12 @@ static const struct usbmisc_ops s32g2_usbmisc_ops = {
 	.power_lost_check = usbmisc_s32g_power_lost_check,
 };
 
+static const struct usbmisc_ops s32g3_usbmisc_ops = {
+	.init = usbmisc_s32g3_init,
+	.set_wakeup = usbmisc_s32g_set_wakeup,
+	.power_lost_check = usbmisc_s32g_power_lost_check,
+};
+
 static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -1430,6 +1441,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "nxp,s32g2-usbmisc",
 		.data = &s32g2_usbmisc_ops,
 	},
+	{
+		.compatible = "nxp,s32g3-usbmisc",
+		.data = &s32g3_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
-- 
2.47.2



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3
  2025-06-12 18:50 [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Dan Carpenter
  2025-06-12 18:50 ` [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2 Dan Carpenter
  2025-06-12 18:51 ` [PATCH 3/3 v2] usb: chipidea: s32g: Add usb support for s32g3 Dan Carpenter
@ 2025-06-13 14:50 ` Frank Li
  2 siblings, 0 replies; 5+ messages in thread
From: Frank Li @ 2025-06-13 14:50 UTC (permalink / raw)
  To: Dan Carpenter
  Cc: Greg Kroah-Hartman, Conor Dooley, devicetree, Fabio Estevam, imx,
	Krzysztof Kozlowski, linux-arm-kernel, linux-kernel, linux-usb,
	Peng Fan, Pengutronix Kernel Team, Peter Chen, Rob Herring,
	Sascha Hauer, Shawn Guo, Xu Yang, s32, linaro-s32, Larisa Grigore,
	Ionut Vicovan, Ghennadi Procopciuc

On Thu, Jun 12, 2025 at 09:50:42PM +0300, Dan Carpenter wrote:
> This patchset adds support for the s32g2 and s32g3 chips.
>
> The changes since v1:
> * Put the device tree lines in alphabetical order.
> * Add imx@lists.linux.dev to the CC list.
> * Use power_lost_check() instead of creating a new REINIT_DURING_RESUME
>   flag.
> * Change the Copyright date.
> * Leave the .compatible = "nxp,s32g3-usb" out of the ci_hdrc_imx.c
>   driver because people can just specify both in the devicetree
>   since they are compatible.

Suggest add dts patch also, make sure your dts file pass CHECK_DTBS

Frank

>
> Ghennadi Procopciuc (3):
>   dt-bindings: usb: Add compatible strings for s32g2/s32g3
>   usb: chipidea: s32g: Add usb support for s32g2
>   usb: chipidea: s32g: Add usb support for s32g3
>
>  .../devicetree/bindings/usb/ci-hdrc-usb2.yaml |  2 +
>  .../devicetree/bindings/usb/fsl,usbmisc.yaml  |  2 +
>  drivers/usb/chipidea/ci_hdrc_imx.c            |  6 ++
>  drivers/usb/chipidea/usbmisc_imx.c            | 89 +++++++++++++++++++
>  4 files changed, 99 insertions(+)
>
> --
> 2.47.2
>


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2
  2025-06-12 18:50 ` [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2 Dan Carpenter
@ 2025-06-13 14:53   ` Frank Li
  0 siblings, 0 replies; 5+ messages in thread
From: Frank Li @ 2025-06-13 14:53 UTC (permalink / raw)
  To: Dan Carpenter
  Cc: Peter Chen, Greg Kroah-Hartman, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, linux-usb, imx,
	linux-arm-kernel, linux-kernel, Krzysztof Kozlowski, s32,
	linaro-s32, Larisa Grigore, Ionut Vicovan, Ghennadi Procopciuc

On Thu, Jun 12, 2025 at 09:50:59PM +0300, Dan Carpenter wrote:
> From: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
>
> Enable USB driver for s32g2.  This chip has an errata ERR050474,

Can you provide errata link here?

> so we need to set S32G_UCMALLBE for it to handle packages which
> aren't 4 byte aligned correctly.
>
> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
> ---
> Changes since v1:
> * Update the copyright
> * Use the .power_lost_check callback.
>
>  drivers/usb/chipidea/ci_hdrc_imx.c |  6 +++
>  drivers/usb/chipidea/usbmisc_imx.c | 74 ++++++++++++++++++++++++++++++
>  2 files changed, 80 insertions(+)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 780f4d151345..e8c847eab8e3 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
>   * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2025 NXP
>   * Copyright (C) 2012 Marek Vasut <marex@denx.de>
>   * on behalf of DENX Software Engineering GmbH
>   */
> @@ -78,6 +79,10 @@ static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
>  		CI_HDRC_HAS_PORTSC_PEC_MISSED,
>  };
>
> +static const struct ci_hdrc_imx_platform_flag s32g_usb_data = {
> +	.flags = CI_HDRC_DISABLE_HOST_STREAMING,
> +};
> +
>  static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
>  	{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
>  	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
> @@ -89,6 +94,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
>  	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
>  	{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
>  	{ .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data},
> +	{ .compatible = "nxp,s32g2-usb", .data = &s32g_usb_data},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 118b9a68496b..67ff073ad806 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
>   * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2025 NXP
>   */
>
>  #include <linux/module.h>
> @@ -155,6 +156,18 @@
>  					 BLKCTL_OTG_VBUS_WAKEUP_EN | \
>  					 BLKCTL_OTG_DPDM_WAKEUP_EN)
>
> +#define S32G_WAKEUP_IE		BIT(0)
> +#define S32G_CORE_IE		BIT(1)
> +#define S32G_PWRFLTEN		BIT(7)
> +#define S32G_WAKEUPCTRL		BIT(10)
> +#define S32G_WAKEUPEN		BIT(11)
> +
> +/* Workaround errata ERR050474 (handle packages that aren't 4 byte aligned) */
> +#define S32G_UCMALLBE		BIT(15)
> +
> +#define S32G_WAKEUP_BITS (S32G_WAKEUP_IE | S32G_CORE_IE | S32G_WAKEUPEN | \
> +			  S32G_WAKEUPCTRL)
> +
>  struct usbmisc_ops {
>  	/* It's called once when probe a usb device */
>  	int (*init)(struct imx_usbmisc_data *data);
> @@ -614,6 +627,52 @@ static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
>  	return 0;
>  }
>
> +static int usbmisc_s32g_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
> +{
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +
> +	reg = readl(usbmisc->base);
> +	if (enabled)
> +		reg |= S32G_WAKEUP_BITS;
> +	else
> +		reg &= ~S32G_WAKEUP_BITS;
> +
> +	writel(reg, usbmisc->base);
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int usbmisc_s32g_init(struct imx_usbmisc_data *data, u32 extra_flags)
> +{
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +
> +	reg = readl(usbmisc->base);
> +
> +	reg |= S32G_PWRFLTEN;
> +	reg |= extra_flags;
> +
> +	writel(reg, usbmisc->base);
> +
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +	usbmisc_s32g_set_wakeup(data, false);
> +
> +	return 0;
> +}
> +
> +static int usbmisc_s32g2_init(struct imx_usbmisc_data *data)
> +{
> +	return usbmisc_s32g_init(data, S32G_UCMALLBE);
> +}
> +
>  static int usbmisc_imx7d_set_wakeup
>  	(struct imx_usbmisc_data *data, bool enabled)
>  {
> @@ -1033,6 +1092,11 @@ static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data)
>  		return 0;
>  }
>
> +static int usbmisc_s32g_power_lost_check(struct imx_usbmisc_data *data)
> +{
> +	return 1;
> +}
> +
>  static u32 usbmisc_blkctl_wakeup_setting(struct imx_usbmisc_data *data)
>  {
>  	u32 wakeup_setting = BLKCTL_WAKEUP_SOURCE;
> @@ -1131,6 +1195,12 @@ static const struct usbmisc_ops imx95_usbmisc_ops = {
>  	.vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
>  };
>
> +static const struct usbmisc_ops s32g2_usbmisc_ops = {
> +	.init = usbmisc_s32g2_init,
> +	.set_wakeup = usbmisc_s32g_set_wakeup,
> +	.power_lost_check = usbmisc_s32g_power_lost_check,
> +};
> +
>  static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
>  {
>  	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> @@ -1356,6 +1426,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
>  		.compatible = "fsl,imx95-usbmisc",
>  		.data = &imx95_usbmisc_ops,
>  	},
> +	{
> +		.compatible = "nxp,s32g2-usbmisc",
> +		.data = &s32g2_usbmisc_ops,
> +	},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
> --
> 2.47.2
>


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2025-06-13 16:17 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-12 18:50 [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Dan Carpenter
2025-06-12 18:50 ` [PATCH 2/3 v2] usb: chipidea: s32g: Add usb support for s32g2 Dan Carpenter
2025-06-13 14:53   ` Frank Li
2025-06-12 18:51 ` [PATCH 3/3 v2] usb: chipidea: s32g: Add usb support for s32g3 Dan Carpenter
2025-06-13 14:50 ` [PATCH 0/3 v2] usb: chipidea: Add support for s32g2 and s32g3 Frank Li

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).