From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT
Date: Mon, 09 Nov 2015 16:16:45 +0200 [thread overview]
Message-ID: <9791748.jMTWEhtVrm@avalon> (raw)
In-Reply-To: <1447032799-13155-3-git-send-email-horms+renesas@verge.net.au>
Hi Simon,
On Monday 09 November 2015 10:33:19 Simon Horman wrote:
> Configure PFC for the already enabled scif and ethernet devices
> in the device tree for the gose board.
>
> Based on similar work for the koelsch board by Laurent Pinchart and
> Sergei Shtylyov.
I can't really comment on the patch due to lack of a schematics for the Goose
board, but it looks good to me in principle.
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts
> b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047
> 100644
> --- a/arch/arm/boot/dts/r8a7793-gose.dts
> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
> @@ -37,7 +37,32 @@
> clock-frequency = <20000000>;
> };
>
> +&pfc {
> + scif0_pins: serial0 {
> + renesas,groups = "scif0_data_d";
> + renesas,function = "scif0";
> + };
> +
> + scif1_pins: serial1 {
> + renesas,groups = "scif1_data_d";
> + renesas,function = "scif1";
> + };
> +
> + ether_pins: ether {
> + renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
> + renesas,function = "eth";
> + };
> +
> + phy1_pins: phy1 {
> + renesas,groups = "intc_irq0";
> + renesas,function = "intc";
> + };
> +};
> +
> ðer {
> + pinctrl-0 = <ðer_pins &phy1_pins>;
> + pinctrl-names = "default";
> +
> phy-handle = <&phy1>;
> renesas,ether-link-active-low;
> status = "okay";
> @@ -55,9 +80,15 @@
> };
>
> &scif0 {
> + pinctrl-0 = <&scif0_pins>;
> + pinctrl-names = "default";
> +
> status = "okay";
> };
>
> &scif1 {
> + pinctrl-0 = <&scif1_pins>;
> + pinctrl-names = "default";
> +
> status = "okay";
> };
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2015-11-09 14:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-09 1:33 [PATCH 0/2] ARM: shmobile: r8a7793: Add PFC to DT Simon Horman
2015-11-09 1:33 ` [PATCH 1/2] " Simon Horman
2015-11-09 1:33 ` [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT Simon Horman
2015-11-09 14:16 ` Laurent Pinchart [this message]
2015-11-10 0:13 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9791748.jMTWEhtVrm@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox