From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Tue, 6 Mar 2018 14:56:01 +0100 Subject: [PATCH v3 4/7] dt-bindings: panel: Add the Ilitek ILI9881c panel documentation In-Reply-To: References: Message-ID: <98f6b4c0746a0d244d009263e8b3e20f40ac280f.1520344489.git-series.maxime.ripard@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Maxime Ripard The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by: Rob Herring Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt new file mode 100644 index 000000000000..df05e8bb4851 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt @@ -0,0 +1,20 @@ +Ilitek ILI9881c based MIPI-DSI panels + +Required properties: + - compatible: must be "ilitek,ili9881c" and one of: + * "bananapi,lhr050h41" + - reg: DSI virtual channel used by that screen + - power-gpios: a GPIO phandle for the power pin + - reset-gpios: a GPIO phandle for the reset pin + +Optional properties: + - backlight: phandle to the backlight used + +Example: +panel at 0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */ + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; +}; -- git-series 0.9.1