From: Heiner Kallweit <hkallweit1@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
Geraldo Nascimento <geraldogabriel@gmail.com>
Subject: [PATCH] mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set
Date: Sun, 12 Feb 2023 22:54:25 +0100 [thread overview]
Message-ID: <9e296859-0363-ecc4-2d99-fd0239efceff@gmail.com> (raw)
Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.
Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/mmc/host/meson-gx-mmc.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 6e5ea0213..a80d48d23 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -435,7 +435,8 @@ static int meson_mmc_clk_init(struct meson_host *host)
clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
- clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
/* get the mux parents */
@@ -948,16 +949,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
struct mmc_command *cmd;
- u32 status, raw_status;
+ u32 status, raw_status, irq_mask = IRQ_EN_MASK;
irqreturn_t ret = IRQ_NONE;
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ irq_mask |= IRQ_SDIO;
raw_status = readl(host->regs + SD_EMMC_STATUS);
- status = raw_status & (IRQ_EN_MASK | IRQ_SDIO);
+ status = raw_status & irq_mask;
if (!status) {
dev_dbg(host->dev,
"Unexpected IRQ! irq_en 0x%08lx - status 0x%08x\n",
- IRQ_EN_MASK | IRQ_SDIO, raw_status);
+ irq_mask, raw_status);
return IRQ_NONE;
}
@@ -1204,6 +1207,11 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host;
}
+ mmc->caps |= MMC_CAP_CMD23;
+
+ if (mmc->caps & MMC_CAP_SDIO_IRQ)
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
host->data = (struct meson_mmc_data *)
of_device_get_match_data(&pdev->dev);
if (!host->data) {
@@ -1277,11 +1285,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
spin_lock_init(&host->lock);
- mmc->caps |= MMC_CAP_CMD23;
-
- if (mmc->caps & MMC_CAP_SDIO_IRQ)
- mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
-
if (host->dram_access_quirk) {
/* Limit segments to 1 due to low available sram memory */
mmc->max_segs = 1;
--
2.39.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-02-12 21:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-12 21:54 Heiner Kallweit [this message]
2023-02-12 22:38 ` [PATCH] mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set Geraldo Nascimento
2023-02-12 23:32 ` Heiner Kallweit
2023-02-13 0:42 ` kernel test robot
2023-02-13 1:07 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e296859-0363-ecc4-2d99-fd0239efceff@gmail.com \
--to=hkallweit1@gmail.com \
--cc=geraldogabriel@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).