[PATCH v3 0/3] Add support for Sakura Pi RK3308B

Hsun Lai
2025-05-19T09:04:02Z

This series add support for Sakura Pi RK3308B.

Info of device can be found at:
https://docs.sakurapi.org/article/sakurapi-rk3308b/introduce

Changes in v3:
- Remove empty i2c controller (Heiko Stuebner, v1)
- Remove unused spi nodes (Heiko Stuebner, v1)
- Sort nodes alphabetically (Heiko Stuebner, v1)
- Put status as last property (Heiko Stuebner, v1)

Changes in v2:
- Update the names of the regulators (Heiko Stuebner, v1)

Changes in v1:
- Add support for Sakura Pi RK3308B
- Patch 2: Acked-by: Conor Dooley <conor.dooley@microchip.com>

Hsun Lai (3):
dt-bindings: vendor-prefixes: Add SakuraPi prefix
dt-bindings: arm: rockchip: Add Sakura Pi RK3308B
arm64: dts: rockchip: add DTs for Sakura Pi RK3308B

.../devicetree/bindings/arm/rockchip.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3308-sakurapi-rk3308b.dts | 274 ++++++++++++++++++
4 files changed, 282 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts

--
2.34.1