Re: [PATCH v1 1/3] dt-bindings: PCI: brcmstb: Add two optional props

From: Florian Fainelli <f.fainelli@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Jim Quinlan <jim2101024@gmail.com>,
	linux-pci@vger.kernel.org,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Cyril Brulebois <kibi@debian.org>,
	Phil Elwell <phil@raspberrypi.com>,
	bcm-kernel-feedback-list@broadcom.com,
	james.quinlan@broadcom.com
Cc: "Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
	<linux-rpi-kernel@lists.infradead.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 1/3] dt-bindings: PCI: brcmstb: Add two optional props
Date: Thu, 6 Apr 2023 11:53:19 -0700	[thread overview]
Message-ID: <9e98496b-73a0-78a5-e890-7d7e4be1f469@gmail.com> (raw)
In-Reply-To: <ebde318b-53be-6779-4f0c-a614c01a0b0a@linaro.org>

On 4/6/23 11:34, Krzysztof Kozlowski wrote:
> On 06/04/2023 14:46, Jim Quinlan wrote:
>> Regarding "brcm,enable-l1ss":
>>
>>    The Broadcom STB/CM PCIe HW -- which is also used by RPi SOCs -- requires
>>    the driver probe to configure one of three clkreq# modes:
>>
>>    (a) clkreq# driven by the RC
>>    (b) clkreq# driven by the EP for ASPM L0s, L1
>>    (c) bidirectional clkreq#, as used for L1 Substates (L1SS).
>>
>>    The HW can tell the difference between (a) and (b), but does not know
>>    when to configure (c).  Further, the HW will cause a CPU abort on boot if
>>    guesses wrong regarding the need for (c).  So we introduce the boolean
>>    "brcm,enable-l1ss" property to indicate that (c) is desired.  This
>>    property is already present in the Raspian version of Linux, but the
>>    driver implementaion that will follow adds more details and discerns
>>    between (a) and (b).
>>
>> Regarding "brcm,completion-timeout-msecs"
>>
>>    Our HW will cause a CPU abort if the L1SS exit time is longer than the
>>    completion abort timeout.  We've been asked to make this configurable, so
>>    we are introducing "brcm,completion-abort-msecs".
>>
>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>> ---
>>   .../devicetree/bindings/pci/brcm,stb-pcie.yaml       | 12 ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>> index 7e15aae7d69e..ef4ccc05b258 100644
>> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>> @@ -64,6 +64,18 @@ properties:
>>   
>>     aspm-no-l0s: true
>>   
>> +  brcm,enable-l1ss:
>> +    description: Indicates that the downstream device is L1SS
>> +      capable and L1SS is desired, e.g. by setting
>> +      CONFIG_PCIEASPM_POWER_SUPERSAVE=y.  Note that CLKREQ#
> 
> How does CONFIG_PCIEASPM_POWER_SUPERSAVE apply to *BSD?

In other words, there should be no OS/Linux specific comments in a 
Device Tree binding, which would be a friendlier and nicer way of 
providing the same feedback.
-- 
Florian


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel