[PATCH 0/4] net: stmmac: dwc-qos: Add FSD EQoS support

[PATCH 0/4] net: stmmac: dwc-qos: Add FSD EQoS support

[Sriranjani P]

FSD platform has two instances of EQoS IP, one is in FSYS0 block and
another one is in PERIC block. This patch series add required DT binding,
DT file modifications and platform driver specific changes for the same.

This series needs following two patches [1,2] posted as part of MCAN IP
support for FSD platform.

[1]: https://www.spinics.net/lists/netdev/msg854161.html
[2]: https://www.spinics.net/lists/netdev/msg854158.html

Sriranjani P (4):
  dt-bindings: net: Add EQoS compatible for FSD SoC
  net: stmmac: dwc-qos: Add FSD EQoS support
  arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC
  arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

 .../devicetree/bindings/net/snps,dwmac.yaml   |   1 +
 arch/arm64/boot/dts/tesla/fsd-evb.dts         |  18 ++
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi    | 112 +++++++++
 arch/arm64/boot/dts/tesla/fsd.dtsi            |  96 ++++++++
 .../stmicro/stmmac/dwmac-dwc-qos-eth.c        | 229 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  12 +
 include/linux/stmmac.h                        |   1 +
 7 files changed, 469 insertions(+)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/4] dt-bindings: net: Add EQoS compatible for FSD SoC

[Sriranjani P]

Add FSD Ethernet compatible in dt-bindings document

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
---
 Documentation/devicetree/bindings/net/snps,dwmac.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e88a86623fce..2b0b9e5f3fa1 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -89,6 +89,7 @@ properties:
         - snps,dwmac-5.10a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - tesla,dwc-qos-ethernet-4.21
 
   reg:
     minItems: 1
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/4] dt-bindings: net: Add EQoS compatible for FSD SoC

[Krzysztof Kozlowski]

On 04/11/2022 08:05, Sriranjani P wrote:
> Add FSD Ethernet compatible in dt-bindings document
> 
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: Jose Abreu <joabreu@synopsys.com>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>

I did not get cover letter and patch 2. Your CC list is incomplete.

For the record - DTS will not go via net-net but Samsung SoC tree.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH 1/4] dt-bindings: net: Add EQoS compatible for FSD SoC

[Sriranjani P]

> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org]
> Sent: 04 November 2022 18:18
> To: Sriranjani P <sriranjani.p@samsung.com>; peppe.cavallaro@st.com;
> alexandre.torgue@foss.st.com; joabreu@synopsys.com;
> davem@davemloft.net; edumazet@google.com; kuba@kernel.org;
> pabeni@redhat.com; mcoquelin.stm32@gmail.com;
> richardcochran@gmail.com
> Cc: netdev@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rob
> Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; devicetree@vger.kernel.org; Pankaj
> Dubey <pankaj.dubey@samsung.com>; Jayati Sahu
> <jayati.sahu@samsung.com>
> Subject: Re: [PATCH 1/4] dt-bindings: net: Add EQoS compatible for FSD SoC
> 
> On 04/11/2022 08:05, Sriranjani P wrote:
> > Add FSD Ethernet compatible in dt-bindings document
> >
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Eric Dumazet <edumazet@google.com>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Paolo Abeni <pabeni@redhat.com>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> > Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> > Cc: Jose Abreu <joabreu@synopsys.com>
> > Cc: devicetree@vger.kernel.org
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> > Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> > Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> 
> I did not get cover letter and patch 2. Your CC list is incomplete.
> 
> For the record - DTS will not go via net-net but Samsung SoC tree.
[Sriranjani P] Got it. Will update the CC list in the next version.
> 
> Best regards,
> Krzysztof
[Sriranjani P] Thank you for the comment.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] net: stmmac: dwc-qos: Add FSD EQoS support

[Sriranjani P]

The FSD SoC contains two instance of the Synopsys DWC ethernet QOS IP core.
The binding that it uses is slightly different from existing ones because
of the integration (clocks, resets).

For FSD SoC, a mux switch is needed between internal and external clocks.
By default after reset internal clock is used but for receiving packets
properly, external clock is needed. Mux switch to external clock happens
only when the external clock is present.

Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
Signed-off-by: Suresh Siddha <ssiddha@tesla.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
---
 .../stmicro/stmmac/dwmac-dwc-qos-eth.c        | 229 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  12 +
 include/linux/stmmac.h                        |   1 +
 3 files changed, 242 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index 80efdeeb0b59..0a60fe3e1909 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/stmmac.h>
+#include <linux/regmap.h>
 
 #include "stmmac_platform.h"
 #include "dwmac4.h"
@@ -37,6 +38,44 @@ struct tegra_eqos {
 	struct gpio_desc *reset;
 };
 
+enum fsd_rxmux_clk {
+	FSD_RXCLK_MUX = 7,
+	FSD_RXCLK_EXTERNAL,
+	FSD_RXCLK_INTERNAL
+};
+
+struct fsd_eqos_plat_data {
+	const struct fsd_eqos_variant *fsd_eqos_instance_variant;
+	struct clk_bulk_data *clks;
+	struct device *dev;
+	int instance_num;
+};
+
+struct fsd_eqos_variant {
+	const char * const *clk_list;
+	int num_clks;
+};
+
+static const char * const fsd_eqos_instance_0_clk[] = {
+	"ptp_ref", "master_bus", "slave_bus", "tx", "rx"
+};
+
+static const char * const fsd_eqos_instance_1_clk[] = {
+	"ptp_ref", "master_bus", "slave_bus", "tx", "rx", "master2_bus",
+	"slave2_bus", "eqos_rxclk_mux", "eqos_phyrxclk", "dout_peric_rgmii_clk"
+};
+
+static const struct fsd_eqos_variant fsd_eqos_clk_info[] = {
+	{
+		.clk_list = fsd_eqos_instance_0_clk,
+		.num_clks = ARRAY_SIZE(fsd_eqos_instance_0_clk)
+	},
+	{
+		.clk_list = fsd_eqos_instance_1_clk,
+		.num_clks = ARRAY_SIZE(fsd_eqos_instance_1_clk)
+	},
+};
+
 static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 				   struct plat_stmmacenet_data *plat_dat)
 {
@@ -267,6 +306,190 @@ static int tegra_eqos_init(struct platform_device *pdev, void *priv)
 	return 0;
 }
 
+static int dwc_eqos_rxmux_setup(void *priv, bool external)
+{
+	struct fsd_eqos_plat_data *plat = priv;
+
+	/* doesn't support RX clock mux */
+	if (!plat->clks[FSD_RXCLK_MUX].clk)
+		return 0;
+
+	if (external)
+		return clk_set_parent(plat->clks[FSD_RXCLK_MUX].clk,
+				      plat->clks[FSD_RXCLK_EXTERNAL].clk);
+	else
+		return clk_set_parent(plat->clks[FSD_RXCLK_MUX].clk,
+				      plat->clks[FSD_RXCLK_INTERNAL].clk);
+}
+
+static int dwc_eqos_setup_rxclock(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	if (np && of_property_read_bool(np, "rx-clock-mux")) {
+		unsigned int reg, val;
+		struct regmap *syscon = syscon_regmap_lookup_by_phandle(np,
+			"rx-clock-mux");
+
+		if (IS_ERR(syscon)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-mux syscon!\n");
+			return PTR_ERR(syscon);
+		}
+
+		if (of_property_read_u32_index(np, "rx-clock-mux", 1, &reg)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-mux reg. offset!\n");
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32_index(np, "rx-clock-mux", 2, &val)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-mux reg. val!\n");
+			return -EINVAL;
+		}
+
+		regmap_write(syscon, reg, val);
+	}
+
+	if (np && of_property_read_bool(np, "rx-clock-skew")) {
+		unsigned int reg, val;
+		struct regmap *syscon = syscon_regmap_lookup_by_phandle(np,
+					"rx-clock-skew");
+
+		if (IS_ERR(syscon)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-skew syscon!\n");
+			return PTR_ERR(syscon);
+		}
+
+		if (of_property_read_u32_index(np, "rx-clock-skew", 1, &reg)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-skew reg. offset!\n");
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32_index(np, "rx-clock-skew", 2, &val)) {
+			dev_err(&pdev->dev, "couldn't get the rx-clock-skew reg. val!\n");
+			return -EINVAL;
+		}
+
+		regmap_write(syscon, reg, val);
+	}
+
+	if (np && of_property_read_bool(np, "tx-clock-mux")) {
+		unsigned int reg, val;
+		struct regmap *syscon = syscon_regmap_lookup_by_phandle(np,
+			"tx-clock-mux");
+
+		if (IS_ERR(syscon)) {
+			dev_err(&pdev->dev, "couldn't get the tx-clock-mux syscon!\n");
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32_index(np, "tx-clock-mux", 1, &reg)) {
+			dev_err(&pdev->dev, "couldn't get the tx-clock-mux reg. offset!\n");
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32_index(np, "tx-clock-mux", 2, &val)) {
+			dev_err(&pdev->dev, "couldn't get the tx-clock-mux reg. val!\n");
+			return -EINVAL;
+		}
+
+		regmap_write(syscon, reg, val);
+	}
+
+	return 0;
+}
+
+static int fsd_eqos_clk_init(struct fsd_eqos_plat_data *plat,
+			     struct plat_stmmacenet_data *data)
+{
+	int ret, i;
+
+	const struct fsd_eqos_variant *fsd_eqos_variant_data = plat->fsd_eqos_instance_variant;
+
+	plat->clks = devm_kcalloc(plat->dev, fsd_eqos_variant_data->num_clks,
+				  sizeof(*plat->clks), GFP_KERNEL);
+	if (!plat->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < fsd_eqos_variant_data->num_clks; i++)
+		plat->clks[i].id = fsd_eqos_variant_data->clk_list[i];
+
+	ret = devm_clk_bulk_get(plat->dev, fsd_eqos_variant_data->num_clks, plat->clks);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int fsd_clks_endisable(void *priv, bool enabled)
+{
+	struct fsd_eqos_plat_data *plat = priv;
+	int ret;
+
+	const struct fsd_eqos_variant *fsd_eqos_variant_data = plat->fsd_eqos_instance_variant;
+
+	if (enabled) {
+		ret = clk_bulk_prepare_enable(fsd_eqos_variant_data->num_clks, plat->clks);
+		if (ret) {
+			dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
+			return ret;
+		}
+	} else {
+		clk_bulk_disable_unprepare(fsd_eqos_variant_data->num_clks, plat->clks);
+	}
+
+	return 0;
+}
+
+static int fsd_eqos_probe(struct platform_device *pdev,
+			  struct plat_stmmacenet_data *data,
+			  struct stmmac_resources *res)
+{
+	struct fsd_eqos_plat_data *priv_plat;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL);
+	if (!priv_plat) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	priv_plat->dev = &pdev->dev;
+	data->bus_id = of_alias_get_id(np, "eth");
+	priv_plat->instance_num = data->bus_id;
+
+	priv_plat->fsd_eqos_instance_variant = &fsd_eqos_clk_info[data->bus_id];
+
+	ret = fsd_eqos_clk_init(priv_plat, data);
+
+	data->bsp_priv = priv_plat;
+	data->clks_config = fsd_clks_endisable;
+	data->rxmux_setup = dwc_eqos_rxmux_setup;
+
+	ret = fsd_clks_endisable(priv_plat, true);
+	if (ret)
+		goto error;
+
+	ret = dwc_eqos_setup_rxclock(pdev);
+	if (ret)
+		dev_err_probe(&pdev->dev, ret, "ERROR:Unable to setup rxclock\n");
+out:
+	return 0;
+
+error:
+	priv_plat = ERR_PTR(ret);
+	goto out;
+}
+
+static int fsd_eqos_remove(struct platform_device *pdev)
+{
+	struct fsd_eqos_plat_data *priv_plat = get_stmmac_bsp_priv(&pdev->dev);
+
+	fsd_clks_endisable(priv_plat, false);
+
+	return 0;
+}
+
 static int tegra_eqos_probe(struct platform_device *pdev,
 			    struct plat_stmmacenet_data *data,
 			    struct stmmac_resources *res)
@@ -415,6 +638,11 @@ static const struct dwc_eth_dwmac_data tegra_eqos_data = {
 	.remove = tegra_eqos_remove,
 };
 
+static const struct dwc_eth_dwmac_data fsd_eqos_data = {
+	.probe = fsd_eqos_probe,
+	.remove = fsd_eqos_remove,
+};
+
 static int dwc_eth_dwmac_probe(struct platform_device *pdev)
 {
 	const struct dwc_eth_dwmac_data *data;
@@ -493,6 +721,7 @@ static int dwc_eth_dwmac_remove(struct platform_device *pdev)
 static const struct of_device_id dwc_eth_dwmac_match[] = {
 	{ .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data },
 	{ .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data },
+	{ .compatible = "tesla,dwc-qos-ethernet-4.21", .data = &fsd_eqos_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8273e6a175c8..7be95a876c32 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3831,6 +3831,9 @@ static int __stmmac_open(struct net_device *dev,
 	netif_tx_start_all_queues(priv->dev);
 	stmmac_enable_all_dma_irq(priv);
 
+	if (priv->plat->rxmux_setup)
+		priv->plat->rxmux_setup(priv->plat->bsp_priv, true);
+
 	return 0;
 
 irq_error:
@@ -3884,6 +3887,9 @@ static int stmmac_release(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 chan;
 
+	if (priv->plat->rxmux_setup)
+		priv->plat->rxmux_setup(priv->plat->bsp_priv, false);
+
 	if (device_may_wakeup(priv->device))
 		phylink_speed_down(priv->phylink, false);
 	/* Stop and disconnect the PHY */
@@ -7383,6 +7389,9 @@ int stmmac_suspend(struct device *dev)
 	if (!ndev || !netif_running(ndev))
 		return 0;
 
+	if (priv->plat->rxmux_setup)
+		priv->plat->rxmux_setup(priv->plat->bsp_priv, false);
+
 	mutex_lock(&priv->lock);
 
 	netif_device_detach(ndev);
@@ -7546,6 +7555,9 @@ int stmmac_resume(struct device *dev)
 	mutex_unlock(&priv->lock);
 	rtnl_unlock();
 
+	if (priv->plat->rxmux_setup)
+		priv->plat->rxmux_setup(priv->plat->bsp_priv, true);
+
 	netif_device_attach(ndev);
 
 	return 0;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index fb2e88614f5d..8867646917e0 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -229,6 +229,7 @@ struct plat_stmmacenet_data {
 	void (*ptp_clk_freq_config)(void *priv);
 	int (*init)(struct platform_device *pdev, void *priv);
 	void (*exit)(struct platform_device *pdev, void *priv);
+	int (*rxmux_setup)(void *priv, bool external);
 	struct mac_device_info *(*setup)(void *priv);
 	int (*clks_config)(void *priv, bool enabled);
 	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] net: stmmac: dwc-qos: Add FSD EQoS support

[Andrew Lunn]

> +static int dwc_eqos_setup_rxclock(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +
> +	if (np && of_property_read_bool(np, "rx-clock-mux")) {
> +		unsigned int reg, val;
> +		struct regmap *syscon = syscon_regmap_lookup_by_phandle(np,
> +			"rx-clock-mux");
> +
> +		if (IS_ERR(syscon)) {
> +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux syscon!\n");
> +			return PTR_ERR(syscon);
> +		}
> +
> +		if (of_property_read_u32_index(np, "rx-clock-mux", 1, &reg)) {
> +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux reg. offset!\n");
> +			return -EINVAL;
> +		}
> +
> +		if (of_property_read_u32_index(np, "rx-clock-mux", 2, &val)) {
> +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux reg. val!\n");
> +			return -EINVAL;
> +		}
> +
> +		regmap_write(syscon, reg, val);

This appears to be one of those binds which allows any magic value to
be placed into any register. That is not how DT should be used.

   Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH 2/4] net: stmmac: dwc-qos: Add FSD EQoS support

[Sriranjani P]

> -----Original Message-----
> From: Andrew Lunn [mailto:andrew@lunn.ch]
> Sent: 04 November 2022 20:55
> To: Sriranjani P <sriranjani.p@samsung.com>
> Cc: peppe.cavallaro@st.com; alexandre.torgue@foss.st.com;
> joabreu@synopsys.com; davem@davemloft.net; edumazet@google.com;
> kuba@kernel.org; pabeni@redhat.com; mcoquelin.stm32@gmail.com;
> richardcochran@gmail.com; netdev@vger.kernel.org; linux-stm32@st-md-
> mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; Chandrasekar R <rcsekar@samsung.com>; Suresh
> Siddha <ssiddha@tesla.com>
> Subject: Re: [PATCH 2/4] net: stmmac: dwc-qos: Add FSD EQoS support
> 
> > +static int dwc_eqos_setup_rxclock(struct platform_device *pdev) {
> > +	struct device_node *np = pdev->dev.of_node;
> > +
> > +	if (np && of_property_read_bool(np, "rx-clock-mux")) {
> > +		unsigned int reg, val;
> > +		struct regmap *syscon =
> syscon_regmap_lookup_by_phandle(np,
> > +			"rx-clock-mux");
> > +
> > +		if (IS_ERR(syscon)) {
> > +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux
> syscon!\n");
> > +			return PTR_ERR(syscon);
> > +		}
> > +
> > +		if (of_property_read_u32_index(np, "rx-clock-mux", 1,
> &reg)) {
> > +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux
> reg. offset!\n");
> > +			return -EINVAL;
> > +		}
> > +
> > +		if (of_property_read_u32_index(np, "rx-clock-mux", 2,
> &val)) {
> > +			dev_err(&pdev->dev, "couldn't get the rx-clock-mux
> reg. val!\n");
> > +			return -EINVAL;
> > +		}
> > +
> > +		regmap_write(syscon, reg, val);
> 
> This appears to be one of those binds which allows any magic value to be
> placed into any register. That is not how DT should be used.
[Sriranjani P] Will fix in the next version.
> 
>    Andrew
[Sriranjani P] Thank you for the review comment.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] net: stmmac: dwc-qos: Add FSD EQoS support

[Andrew Lunn]

> For FSD SoC, a mux switch is needed between internal and external clocks.
> By default after reset internal clock is used but for receiving packets
> properly, external clock is needed. Mux switch to external clock happens
> only when the external clock is present.


> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3831,6 +3831,9 @@ static int __stmmac_open(struct net_device *dev,
>  	netif_tx_start_all_queues(priv->dev);
>  	stmmac_enable_all_dma_irq(priv);
>  
> +	if (priv->plat->rxmux_setup)
> +		priv->plat->rxmux_setup(priv->plat->bsp_priv, true);
> +
>  	return 0;
>  
>  irq_error:
> @@ -3884,6 +3887,9 @@ static int stmmac_release(struct net_device *dev)
>  	struct stmmac_priv *priv = netdev_priv(dev);
>  	u32 chan;
>  
> +	if (priv->plat->rxmux_setup)
> +		priv->plat->rxmux_setup(priv->plat->bsp_priv, false);
> +

Is this the code which is deciding if the external clock is present? So when somebody called
'ip link set eth42 up'?

Where is the external clock coming from?

      Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC

[Sriranjani P]

The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one
in FSYS0 block and other in PERIC block.

Adds device tree node for Ethernet in FSYS0 Block and enables the same for
FSD platform.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
---
 arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56 ++++++++++++++++++++++
 arch/arm64/boot/dts/tesla/fsd.dtsi         | 38 +++++++++++++++
 3 files changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
index 1db6ddf03f01..42bf25c680e2 100644
--- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -30,6 +30,15 @@
 	};
 };
 
+&ethernet_0 {
+	status = "okay";
+
+	fixed-link {
+		speed=<1000>;
+		full-duplex;
+	};
+};
+
 &fin_pll {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index d0abb9aa0e9e..8c7e43085a2b 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -64,6 +64,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
 	};
+
+	eth0_tx_clk: eth0-tx-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_data: eth0-tx-data-pins {
+		samsung,pins = "gpf0-1", "gpf0-2", "gpf0-3", "gpf0-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_ctrl: eth0-tx-ctrl-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_phy_intr: eth0-phy-intr-pins {
+		samsung,pins = "gpf0-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth0_rx_clk: eth0-rx-clk-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_data: eth0-rx-data-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_ctrl: eth0-rx-ctrl-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_mdio: eth0-mdio-pins {
+		samsung,pins = "gpf1-6", "gpf1-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_peric {
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index f35bc5a288c2..2495928b71dc 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -32,6 +32,7 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		eth0 = &ethernet_0;
 	};
 
 	cpus {
@@ -860,6 +861,43 @@
 			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
 			clock-names = "ref_clk";
 		};
+
+		ethernet_0: ethernet@15300000 {
+			compatible = "tesla,dwc-qos-ethernet-4.21";
+			reg = <0x0 0x15300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =
+				/* ptp ref clock */
+				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_PTP_REF_I>,
+				/* aclk clocks */
+				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_ACLK_I>,
+				/* hclk clocks */
+				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_HCLK_I>,
+				/* rgmii clocks */
+				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_RGMII_CLK_I>,
+				/* rxi clocks */
+				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_RX_I>;
+			clock-names =
+				/* ptp ref clocks */
+				"ptp_ref",
+				/* aclk clocks */
+				"master_bus",
+				/* hclk clocks */
+				"slave_bus",
+				/* rgmii clk */
+				"tx",
+				/* rxi clocks */
+				"rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth0_tx_clk>, <&eth0_tx_data>, <&eth0_tx_ctrl>,
+				<&eth0_phy_intr>, <&eth0_rx_clk>, <&eth0_rx_data>,
+				<&eth0_rx_ctrl>, <&eth0_mdio>;
+			local-mac-address = [45 54 48 30 4d 43];
+			rx-clock-skew = <&sysreg_fsys0 0x0 0x2>;
+			iommus = <&smmu_fsys0 0x0 0x1>;
+			status = "disabled";
+			phy-mode = "rgmii";
+		};
 	};
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC

[Krzysztof Kozlowski]

On 04/11/2022 08:05, Sriranjani P wrote:
> The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one
> in FSYS0 block and other in PERIC block.
> 
> Adds device tree node for Ethernet in FSYS0 Block and enables the same for
> FSD platform.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> ---
>  arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
>  arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56 ++++++++++++++++++++++
>  arch/arm64/boot/dts/tesla/fsd.dtsi         | 38 +++++++++++++++
>  3 files changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> index 1db6ddf03f01..42bf25c680e2 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
> +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> @@ -30,6 +30,15 @@
>  	};
>  };
>  
> +&ethernet_0 {
> +	status = "okay";
> +
> +	fixed-link {
> +		speed=<1000>;

Missing spaces around =.

> +		full-duplex;
> +	};
> +};
> +
>  &fin_pll {
>  	clock-frequency = <24000000>;
>  };
> diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> index d0abb9aa0e9e..8c7e43085a2b 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> @@ -64,6 +64,62 @@
>  		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
>  		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
>  	};
> +
> +	eth0_tx_clk: eth0-tx-clk-pins {
> +		samsung,pins = "gpf0-0";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_tx_data: eth0-tx-data-pins {
> +		samsung,pins = "gpf0-1", "gpf0-2", "gpf0-3", "gpf0-4";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_tx_ctrl: eth0-tx-ctrl-pins {
> +		samsung,pins = "gpf0-5";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_phy_intr: eth0-phy-intr-pins {
> +		samsung,pins = "gpf0-6";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
> +
> +	eth0_rx_clk: eth0-rx-clk-pins {
> +		samsung,pins = "gpf1-0";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_rx_data: eth0-rx-data-pins {
> +		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_rx_ctrl: eth0-rx-ctrl-pins {
> +		samsung,pins = "gpf1-5";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth0_mdio: eth0-mdio-pins {
> +		samsung,pins = "gpf1-6", "gpf1-7";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
>  };
>  
>  &pinctrl_peric {
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
> index f35bc5a288c2..2495928b71dc 100644
> --- a/arch/arm64/boot/dts/tesla/fsd.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> @@ -32,6 +32,7 @@
>  		spi0 = &spi_0;
>  		spi1 = &spi_1;
>  		spi2 = &spi_2;
> +		eth0 = &ethernet_0;

Not every board will have ethernet, so this should be in board DTS.
However other question is - why do you need it?

>  	};
>  
>  	cpus {
> @@ -860,6 +861,43 @@
>  			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
>  			clock-names = "ref_clk";
>  		};
> +
> +		ethernet_0: ethernet@15300000 {
> +			compatible = "tesla,dwc-qos-ethernet-4.21";
> +			reg = <0x0 0x15300000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks =
> +				/* ptp ref clock */

That's not a formatting used in sources. I doubt that they are actually
useful as you copy the name of the clock.

> +				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_PTP_REF_I>,
> +				/* aclk clocks */
> +				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_ACLK_I>,
> +				/* hclk clocks */
> +				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_HCLK_I>,
> +				/* rgmii clocks */
> +				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_RGMII_CLK_I>,
> +				/* rxi clocks */
> +				<&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_RX_I>;
> +			clock-names =
> +				/* ptp ref clocks */
> +				"ptp_ref",
> +				/* aclk clocks */
> +				"master_bus",
> +				/* hclk clocks */
> +				"slave_bus",
> +				/* rgmii clk */
> +				"tx",
> +				/* rxi clocks */
> +				"rx";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&eth0_tx_clk>, <&eth0_tx_data>, <&eth0_tx_ctrl>,
> +				<&eth0_phy_intr>, <&eth0_rx_clk>, <&eth0_rx_data>,
> +				<&eth0_rx_ctrl>, <&eth0_mdio>;
> +			local-mac-address = [45 54 48 30 4d 43];

So all devices in the world will have exactly the same MAC address? I
don't think that's desired :)

> +			rx-clock-skew = <&sysreg_fsys0 0x0 0x2>;

Where is the property documented?

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

Please confirm that you perform above.

> +			iommus = <&smmu_fsys0 0x0 0x1>;
> +			status = "disabled";

Status is last.

> +			phy-mode = "rgmii";
> +		};
>  	};
>  };
>  

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC

[Krzysztof Kozlowski]

On 04/11/2022 08:05, Sriranjani P wrote:
> The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one
> in FSYS0 block and other in PERIC block.
> 
> Adds device tree node for Ethernet in FSYS0 Block and enables the same for
> FSD platform.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> ---

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH 3/4] arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC

[Sriranjani P]

> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org]
> Sent: 04 November 2022 18:17
> To: Sriranjani P <sriranjani.p@samsung.com>; peppe.cavallaro@st.com;
> alexandre.torgue@foss.st.com; joabreu@synopsys.com;
> davem@davemloft.net; edumazet@google.com; kuba@kernel.org;
> pabeni@redhat.com; mcoquelin.stm32@gmail.com;
> richardcochran@gmail.com
> Cc: netdev@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rob
> Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; devicetree@vger.kernel.org; Pankaj
> Dubey <pankaj.dubey@samsung.com>; Jayati Sahu
> <jayati.sahu@samsung.com>
> Subject: Re: [PATCH 3/4] arm64: dts: fsd: Add Ethernet support for FSYS0
> Block of FSD SoC
> 
> On 04/11/2022 08:05, Sriranjani P wrote:
> > The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP,
> > one in FSYS0 block and other in PERIC block.
> >
> > Adds device tree node for Ethernet in FSYS0 Block and enables the same
> > for FSD platform.
> >
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > Cc: Richard Cochran <richardcochran@gmail.com>
> > Cc: devicetree@vger.kernel.org
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> > Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> > Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> > ---
> 
> Please use scripts/get_maintainers.pl to get a list of necessary people and
> lists to CC.  It might happen, that command when run on an older kernel,
> gives you outdated entries.  Therefore please be sure you base your patches
> on recent Linux kernel.
[Sriranjani P] Sure. Will update CC list in the next version.
> 
> Best regards,
> Krzysztof
[Sriranjani P] Thank you.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

[Sriranjani P]

The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
FSYS0 block and other in PERIC block.

Adds device tree node for Ethernet in PERIC Block and enables the same for
FSD platform.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
---
 arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56 +++++++++++++++++++++
 arch/arm64/boot/dts/tesla/fsd.dtsi         | 58 ++++++++++++++++++++++
 3 files changed, 123 insertions(+)

diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
index 42bf25c680e2..328db875667a 100644
--- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -39,6 +39,15 @@
 	};
 };
 
+&ethernet_1 {
+	status = "okay";
+
+	fixed-link {
+		speed=<1000>;
+		full-duplex;
+	};
+};
+
 &fin_pll {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index 8c7e43085a2b..94ef5392ad9c 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -395,6 +395,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
 	};
+
+	eth1_tx_clk: eth1-tx-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_data: eth1-tx-data-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_ctrl: eth1-tx-ctrl-pins {
+		samsung,pins = "gpf2-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_phy_intr: eth1-phy-intr-pins {
+		samsung,pins = "gpf2-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth1_rx_clk: eth1-rx-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_data: eth1-rx-data-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_ctrl: eth1-rx-ctrl-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_mdio: eth1-mdio-pins {
+		samsung,pins = "gpf3-6", "gpf3-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_pmu {
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index 2495928b71dc..e63c1f8fa6ca 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -33,6 +33,7 @@
 		spi1 = &spi_1;
 		spi2 = &spi_2;
 		eth0 = &ethernet_0;
+		eth1 = &ethernet_1;
 	};
 
 	cpus {
@@ -898,6 +899,63 @@
 			status = "disabled";
 			phy-mode = "rgmii";
 		};
+
+		ethernet_1: ethernet@14300000 {
+			compatible = "tesla,dwc-qos-ethernet-4.21";
+			reg = <0x0 0x14300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =
+				/* ptp ref clock */
+				<&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
+				/* aclk clocks */
+				<&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
+				/* hclk clocks */
+				<&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
+				/* rgmii clocks */
+				<&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
+				/* rxi clocks */
+				<&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
+				/* eqos d-bus clocks */
+				<&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
+				/* eqos p-bus clocks */
+				<&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
+				/* eqos peric clock mux */
+				<&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+				/* eqos peric phy rxclock */
+				<&clock_peric PERIC_EQOS_PHYRXCLK>,
+				/* internal peric rgmii clk */
+				<&clock_peric PERIC_DOUT_RGMII_CLK>;
+			clock-names =
+				/* ptp ref clocks */
+				"ptp_ref",
+				/* aclk clocks */
+				"master_bus",
+				/* hclk clocks */
+				"slave_bus",
+				/* rgmii clk */
+				"tx",
+				/* rxi clocks */
+				"rx",
+				/* eqos dbus clocks */
+				"master2_bus",
+				/* eqos pbus clocks */
+				"slave2_bus",
+				/* rgmii clock mux */
+				"eqos_rxclk_mux",
+				/* rgmii phy rx clock */
+				"eqos_phyrxclk",
+				/* internal peric rgmii clk */
+				"dout_peric_rgmii_clk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
+				<&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
+				<&eth1_rx_ctrl>, <&eth1_mdio>;
+			local-mac-address = [45 54 48 31 4d 43];
+			rx-clock-skew = <&sysreg_peric 0x10 0x0>;
+			iommus = <&smmu_peric 0x0 0x1>;
+			status = "disabled";
+			phy-mode = "rgmii";
+		};
 	};
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

[Krzysztof Kozlowski]

On 04/11/2022 08:05, Sriranjani P wrote:
> The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
> FSYS0 block and other in PERIC block.
> 
> Adds device tree node for Ethernet in PERIC Block and enables the same for
> FSD platform.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> ---

Same comment apply.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

[Sriranjani P]

> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org]
> Sent: 04 November 2022 18:17
> To: Sriranjani P <sriranjani.p@samsung.com>; peppe.cavallaro@st.com;
> alexandre.torgue@foss.st.com; joabreu@synopsys.com;
> davem@davemloft.net; edumazet@google.com; kuba@kernel.org;
> pabeni@redhat.com; mcoquelin.stm32@gmail.com;
> richardcochran@gmail.com
> Cc: netdev@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rob
> Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; devicetree@vger.kernel.org; Pankaj
> Dubey <pankaj.dubey@samsung.com>; Jayati Sahu
> <jayati.sahu@samsung.com>
> Subject: Re: [PATCH 4/4] arm64: dts: fsd: Add Ethernet support for PERIC
> Block of FSD SoC
> 
> On 04/11/2022 08:05, Sriranjani P wrote:
> > The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP,
> > one in
> > FSYS0 block and other in PERIC block.
> >
> > Adds device tree node for Ethernet in PERIC Block and enables the same
> > for FSD platform.
> >
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > Cc: Richard Cochran <richardcochran@gmail.com>
> > Cc: devicetree@vger.kernel.org
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> > Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> > Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> > ---
> 
> Same comment apply.
[Sriranjani P] Will be fixed in the next version.
> 
> Best regards,
> Krzysztof
[Sriranjani P] Thank you for the review comments.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

[Andrew Lunn]

> +&ethernet_1 {
> +	status = "okay";
> +
> +	fixed-link {
> +		speed=<1000>;
> +		full-duplex;
> +	};

That is pretty unusual. Fixed link is generally used when connected to
an Ethernet switch. Is that the case here?

   Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel