messages from 2009-10-16 19:09:40 to 2009-10-21 07:53:47 UTC [more...]
[PATCH] mmc: at91_mci: Don't include asm/mach/mmc.h
2009-10-21 7:53 UTC (7+ messages)
` [PATCH RESEND#2] "
[PATCH] Use CONFIG_VECTORS_BASE instead of hardcoded 0xffff0000
2009-10-21 7:04 UTC (4+ messages)
[PATCH] input/touchscreen: add S3C24XX SoC touchscreen input driver
2009-10-21 4:34 UTC (3+ messages)
` [PATCH v2] "
[PATCH] ARM:S3C2440: MINI2440 Remove some improper __initdata qualifiers
2009-10-21 3:33 UTC
[PATCH] ep93xx: add keypad core support
2009-10-21 1:10 UTC (2+ messages)
[PATCH] CPU_ARM920T: remove dead Maverick EP9312 URL
2009-10-21 1:01 UTC (2+ messages)
[PATCH] ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()
2009-10-21 1:00 UTC (2+ messages)
[PATCH] ep93xx: remove ep93xx_init_time() prototype
2009-10-21 0:58 UTC (2+ messages)
[PATCH] ep93xx: add errata info about pwm outputs
2009-10-21 0:58 UTC (3+ messages)
[PATCH] Make MIPS dynamic clocksource/clockevent clock code generic v2
2009-10-20 23:02 UTC (2+ messages)
[PATCH] Make MIPS dynamic clocksource/clockevent clock code generic
2009-10-20 22:16 UTC (8+ messages)
collie and SA1100 patches
2009-10-20 19:43 UTC (3+ messages)
[PATCH 0/6] Reorganize omap headers to have include/plat
2009-10-20 17:42 UTC (7+ messages)
` [PATCH 3/6] omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2
` [PATCH 3b/6] omap: Split vmalloc.h "
` [PATCH 5/6] omap: headers: Create headers necessary for compile under "
[PATCH] imx/gpio: Use handle_level_irq
2009-10-20 17:37 UTC (3+ messages)
zaurus: cleanup sharpsl_pm.c
2009-10-20 15:59 UTC (3+ messages)
[PATCH 00/46] davinci updates for 2.6.33
2009-10-20 15:06 UTC (65+ messages)
` [PATCH 01/46] DaVinci: DM365: SDIO interrupt resource correction
` [PATCH 02/46] DaVinci: DM365: Correct USB parent clock
` [PATCH 03/46] Davinci: DM365: Add platform device for McBSP
` [PATCH 04/46] davinci: Move DA8xx/OMAP-L13x emac register routine
` [PATCH 05/46] davinci: Change DA8xx/OMAP-L13x McASP registration routine name
` [PATCH 06/46] davinci: Add DA830/OMAP-L137 EVM specific pinmux setting for McASP1
` [PATCH 07/46] davinci: DA8XX/OMAP-L1XX: It's SYSCFG not BOOT_CFG
` [PATCH 08/46] davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG module
` [PATCH 09/46] davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG base
` [PATCH 10/46] davinci: enable easy top down traversal of clock tree
` [PATCH 11/46] davinci: make clock rate re-calculation easy
` [PATCH 12/46] davinci: support changing the clock rate in clock framework
` [PATCH 13/46] davinci: support re-parenting a clock in the "
` [PATCH 14/46] davinci: DA850/OMAP-L138: allow async3 source to be changed
` [PATCH 15/46] davinci: dm646x: Add support for 3.x silicon revision
` [PATCH 16/46] davinci: Add MMC/SD support for DA830/OMAP-L137 EVM
` [PATCH 17/46] davinci: Add support for Sharp LCD035Q3DG01 graphical LCD
` [PATCH 18/46] davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM
` [PATCH 19/46] davinci: Add RTC support for DA8xx/OMAP-L13x SoC's
` [PATCH 20/46] davinci: Correct the GPIO number for LCD panel power
` [PATCH 21/46] DaVinci: EDMA: Fix bug in edma_free_cont_slots API
` [PATCH 22/46] DaVinci: EDMA: Fix Bug in edma_alloc_cont_slots API
` [PATCH 23/46] davinci: DM355: Update NAND driver platform data
` [PATCH 24/46] davinci: DM365: "
` [PATCH 25/46] DaVinci: EDMA: Fix Bug while obtaining contiguous params
` [PATCH 26/46] DaVinci: EDMA: Updating terminlogy in EDMA driver
` [PATCH 27/46] davinci: DA8xx: CFGCHIP2 register definitions
` [PATCH 28/46] davinci: DA8xx: OHCI platform device
` [PATCH 29/46] davinci: DA830 EVM: OHCI platform code
` [PATCH 30/46] davinci: da830 EVM: make machine name string consistent with da850
` [PATCH 31/46] davinci: da830: add support for new silicon revisions
` [PATCH 32/46] davinci: da830 EVM: remove #include <mach/gpio.h>
` [PATCH 33/46] davinci: add generic CPUFreq driver for DaVinci
` [PATCH 34/46] davinci: DA850/OMAP-L138: add frequency scaling support
` [PATCH 35/46] davinci: DA850/OMAP-L138: add voltage regulation support
` [PATCH 36/46] davinci: DA850/OMAP-L138 EVM: register for CPUFreq support
` [PATCH 37/46] davinci: DA850/OMAP-L138 EVM: add support for TPS65070 PMIC
` [PATCH 38/46] davinci: fix compilation error when using mach/system.h
` [PATCH 39/46] davinci: DA8xx: rename 'psc_ctlr' field into 'gpsc'
` [PATCH 40/46] davinci: DA850/OMAP-L138 EVM expander setup and UI card detection
` [PATCH 41/46] davinci: RMII support for DA850/OMAP-L138 EVM
` [PATCH 42/46] davinci: make it easier to identify SoC init failures
` [PATCH 43/46] DaVinci: remove unneeded #include's
` [PATCH 44/46] davinci: dm646x-evm: Add platform data for NAND
` [PATCH 45/46] davinci: DA850/OMAP-L138: Set ASYNC3 domain flag for McASP
` [PATCH 46/46] davinci: DMx and da8xx defconfig updates
[PATCH] at91: at91sam9g20ek modify dual slot evaluation kit
2009-10-20 14:32 UTC
[PATCH] s3c24xx-adc: resume convertions interrupted by going to suspend
2009-10-20 14:19 UTC
[PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10
2009-10-20 13:01 UTC (6+ messages)
Kernel related (?) user space crash at ARM11 MPCore
2009-10-20 11:39 UTC (13+ messages)
ARM1176 goes wild when MMU on line
2009-10-20 10:26 UTC (4+ messages)
` 答复: "
[PATCH] input/touchscreen: add S3C24XX SoC touchscreen input driver
2009-10-20 10:09 UTC (10+ messages)
[PATCH V1 1/3] i2c: imx: check busy bit when START/STOP
2009-10-20 10:03 UTC (4+ messages)
` [PATCH V1 2/3] i2c: imx: only imx1 needs disable delay
` [PATCH V1 3/3] i2c: imx: disable clock when it's possible to save power
usb support for imx35 ?
2009-10-20 8:21 UTC (2+ messages)
[RFC] mx31moboard: patches for next merge window
2009-10-20 8:09 UTC (9+ messages)
` [PATCH 1/6] mx31: various pins used for mx31moboard
` [PATCH 2/6] mx31moboard: serial port fix
` [PATCH 3/6] mx31moboard: support for pin linked for battery presence check
` [PATCH 4/6] mx31moboard: initialize ipu device for all the boards
` [PATCH 5/6] mx31moboard: camera support
Ext3 is supported not well at 2.6.28 for external SD card removal
2009-10-20 7:33 UTC (11+ messages)
[PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space
2009-10-20 6:34 UTC (30+ messages)
` [PATCH 01/14] omap: Change low-level serial init to use ioremap
` [PATCH 02/14] omap: Use ioremap in irq.c
` [PATCH 03/14] omap: Use ioremap in dma.c
` [PATCH 04/14] omap: Use ioremap in dmtimer.c
` [PATCH 05/14] omap: Use ioremap in gpio.c
` [PATCH 06/14] omap: Use ioremap in omap_hwmod.c
` [PATCH 07/14] omap: Use getnstimeofday for omap_device
` [PATCH 08/14] omap: Use ioremap for omap4 L4 code
` [PATCH 09/14] omap: Use ioremap in dispc.c
` [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4
` [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
` [PATCH 12/14] omap: Move SRAM map to claim more io space
` [PATCH 13/14] omap: Fix DEBUG_LL UART io address
` [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals
[PATCH] omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2
2009-10-20 0:32 UTC
[PATCH] omap: Split vmalloc.h for mach-omap1 and mach-omap2
2009-10-20 0:26 UTC
[PATCH] omap: Split vmalloc.h for mach-omap1 and mach-omap2
2009-10-20 0:11 UTC
spitz backlight: fix brightness limiting
2009-10-19 21:37 UTC
[PATCH] at91: support for eco920
2009-10-19 21:13 UTC (4+ messages)
[PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
2009-10-19 20:32 UTC (4+ messages)
Fix watchdog enabling for AT91SAM9G45
2009-10-19 19:32 UTC (2+ messages)
[PATCH 0/4] RealView patches for 2.6.33
2009-10-19 16:03 UTC (8+ messages)
` [PATCH 3/4] Revert 75f4aa1 (unconditionally define __virt_to_phys and __phys_to_virt)
` [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform
[PATCH] serial/atmel_serial: Fix another fallout of the change to BUILD_BUG_ON
2009-10-19 14:32 UTC (6+ messages)
[PATCH 0/4] [MXC] Armadillo500 patches to support various devices
2009-10-19 14:27 UTC (4+ messages)
` [PATCH 1/4] [MXC] Armadillo500 Add support for onboard GPIO Buttons
` [PATCH 2/4] [MXC] Armadillo500 Correct bus length for SMSC9118 on board chip
[PATCH] kirkwood: pci: don't remap io address
2009-10-19 12:30 UTC
kirkwood pci support
2009-10-19 12:11 UTC (2+ messages)
[PATCH 13/14] arch/arm/plat-s3c24xx: Move dereference after NULL test
2009-10-19 11:25 UTC (2+ messages)
About the system call named "sys_mount"
2009-10-19 10:21 UTC (2+ messages)
Patches for SPI support on Lilly1131 modules
2009-10-19 8:20 UTC (7+ messages)
` [PATCH 1/4] ARM: MX3: remove I2C defintions from mx31lilly.c
` [PATCH 2/4] ARM: MX3: add SPI functions for lilly1131-db
` [PATCH 3/4] ARM: MX3: add support for mc13783 on lilly-db
` [PATCH 4/4] ARM: MX3: add MX3X_UART1_BASE_ADDR for uncompression on lilly1131
[PATCH 7/14] drivers/mmc: Move dereference after NULL test
2009-10-19 7:56 UTC (2+ messages)
Montreal Linux Power Management Mini-Summit, July 13, 2009 - Meeting Notes
2009-10-19 7:44 UTC (4+ messages)
` [linux-pm] "
[RFC] i2c-designware patches
2009-10-19 1:23 UTC (3+ messages)
[PATCH] omap: Use ioremap for omap4 L4 code
2009-10-19 0:19 UTC
[PATCH] omap: Use ioremap for omap4 L4 code
2009-10-19 0:19 UTC
[PATCH] pxa: add 2d graphics driver
2009-10-18 17:43 UTC
[PATCH] [ARM] pxa: rename macro from pxa9xx to pxa93x
2009-10-18 10:09 UTC
[PATCH] pxa: extend gpio pins from 128 to 256
2009-10-18 7:28 UTC (6+ messages)
[PATCH] Updated U300 defconfig
2009-10-17 21:40 UTC
arm / kirkwood (openrd): cpu_idle
2009-10-17 15:49 UTC (6+ messages)
[GIT PULL] pxa: 2 fixes for 2.6.32-rc5
2009-10-17 15:18 UTC
[PATCH v3 4/7] [ARM]: U8500 Makefile.boot
2009-10-17 14:47 UTC (5+ messages)
` [PATCH v3 5/7] [ARM]: U8500 integrate to ARM architecture
` [PATCH v3 6/7] [ARM]: adds AB4500 as pl022 device
[PATCH v3 2/7] [ARM]: U8500 clock framework
2009-10-17 14:41 UTC (3+ messages)
` [PATCH v3 3/7] [ARM]: U8500 core machine support
[PATCH v3 0/8] [ARM] ST-Ericsson's U8500 SMP platform, a new patch set
2009-10-17 14:31 UTC (3+ messages)
` [PATCH v3 1/7] [ARM]: U8500 register definitions
[PATCH] omap: ioremap fixes for omap4
2009-10-17 9:55 UTC
[PATCH 12/14] arch/arm/plat-omap: Drop an unnecessary NULL test
2009-10-17 6:42 UTC
spitz: add gpio button support (AK_INT and remote control description)
2009-10-17 4:42 UTC (13+ messages)
` spitz: add gpio button support (fixes regression)
` [PATCH] "
[PATCH] omap: Use ioremap in gpio.c
2009-10-16 22:55 UTC
[PATCH v3 2/2] n2100: support assigning XINT1 to UART
2009-10-16 22:02 UTC
[PATCH v3 1/2] n2100: reduce power button timer to 1 Hz
2009-10-16 22:02 UTC
[PATCH v3 0/2] n2100: tweaks for tickless operation
2009-10-16 22:01 UTC
[PATCH v3 4/4] iop: implement sched_clock()
2009-10-16 22:00 UTC
[PATCH v3 3/4] iop: enable generic time
2009-10-16 22:00 UTC
[PATCH v3 2/4] iop: clockevent support
2009-10-16 21:59 UTC
[PATCH v3 1/4] iop: clocksource support
2009-10-16 21:59 UTC
[PATCH v3 0/4] iop: convert to generic time
2009-10-16 21:58 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).