messages from 2010-02-02 23:59:28 to 2010-02-04 15:03:45 UTC [more...]
[PATCH] Add USB support for i.MX27/35 and Phytec i.MX boards
2010-02-04 15:03 UTC (9+ messages)
` [PATCH 1/8] fsl_mx3_udc: Add i.MX35 support
` [PATCH 2/8] i.MX ehci platform support: Some fixes
` [PATCH 3/8] i.MX27: Add USB control register access support
` [PATCH 4/8] i.MX35: "
` [PATCH 5/8] i.MX27 pca100: Add USB support
` [PATCH 6/8] i.MX27 pcm038: "
` [PATCH 7/8] i.MX31 pcm037: "
` [PATCH 8/8] i.MX27 pca100: "
[PATCH 0/5] cache-l2x0 and omap4 l2 support
2010-02-04 14:43 UTC (2+ messages)
[PATCH 1/5] ARM: L2 : Add maintainace by line helper functions
2010-02-04 14:42 UTC (7+ messages)
` [PATCH 2/5] OMAP4: Add L2 Cache support
` [PATCH 3/5] OMAP4: Clean the secondary_data from L2
` [PATCH 4/5] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines
` [PATCH 5/5] OMAP4: Enable L2 Cache
[PXA320] How to find I/O registers, base address of ASIX ethernet chip?
2010-02-04 13:31 UTC (5+ messages)
[RFC PATCH] ARM: Change the mandatory barriers implementation
2010-02-04 13:15 UTC (4+ messages)
[PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send
2010-02-04 13:14 UTC (7+ messages)
[PATCH 00/20] imx cleanup series
2010-02-04 12:25 UTC (13+ messages)
` [PATCH 01/25] imx/mx2: fold crm_regs.h into its only consumer
` [PATCH 02/25] imx/clock-imx21: use a macro to define registers
` [PATCH 03/25] imx/clock-imx27: "
` [PATCH 04/25] imx/mach-mx2: use constants namespaced by the corresponding SOC (easy part)
` [PATCH 05/25] imx/mach-mx3: "
` [PATCH 06/25] imx/mx3: rename clock.c and iomux.c to {clock, iomux}-imx31.c
` [PATCH 07/25] imx/mx1: add newline at end of Makefile
` [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c
[PATCH 5/5] input: support onkey in 88pm860x
2010-02-04 11:08 UTC (3+ messages)
[PATCH 1/2] Modify PL031 for Nomadik and U8500 v2
2010-02-04 10:22 UTC (3+ messages)
[PATCH 11/16] ARM: LPC32XX: Converted interrupt registers to void __iomem *
2010-02-04 10:05 UTC (2+ messages)
[PATCH 01/16] ARM: LPC32XX: clock lookups array should not be tagged __initdata
2010-02-04 9:59 UTC (4+ messages)
make PHYS_OFFSET determined at run time (unfinished)
2010-02-04 9:52 UTC (7+ messages)
` change boot requirements [Was: make PHYS_OFFSET determined at run time (unfinished)]
` [PATCH] arm: remove bit-rotten STANDALONE_DEBUG for decompressor
[PATCH] RFC: mx27: Add soc_camera support
2010-02-04 9:36 UTC (2+ messages)
[PATCH] vic: make irq_chip access typesafe
2010-02-04 9:09 UTC (2+ messages)
atmel-mci / at91_mci
2010-02-04 8:57 UTC
[PATCH 2/2] Add RTC PL031 derivative platform config for ux500
2010-02-04 8:45 UTC
LPC32XX architecture files (updated)
2010-02-04 8:17 UTC (40+ messages)
` [PATCH 04/13] ARM: LPC32XX arch support in Kconfig and Makefile
` [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles
` [PATCH 06/13] ARM: LPC32XX: Core architecture files
` [PATCH 07/13] ARM: LPC32XX: common architecture functions and structures
` [PATCH 08/13] ARM: LPC32XX: clock tree support
` [PATCH 09/13] ARM: LPC32XX: power and event management
` [PATCH 10/13] ARM: LPC32XX: Phytec PHY3250 platform support file
` [PATCH 11/13] ARM: LPC32XX: printascii() output and irq support functions
` [PATCH 12/13] ARM: LPC32XX: architecture header files
[git patches] new hardware support for atang tree
2010-02-04 8:16 UTC (3+ messages)
copy_to_user limits inquiry
2010-02-04 3:17 UTC
[PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442
2010-02-04 1:02 UTC (5+ messages)
[PATCHv2 00/11] Base support for Freescale i.MX51 SoC platform
2010-02-04 0:54 UTC (38+ messages)
` [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family
` [PATCHv2 02/11] mxc timer: refactor timer code to use timer versions
` [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller
` [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5
` [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale
` [PATCHv2 06/11] mxc: enable support for Freescale i.MX5 series of processors
` [PATCHv2 07/11] mxc: Add support for the Babbage board
` [PATCHv2 08/11] fec: fix uninitialized rx buffer usage
` [PATCHv2 09/11] fec: Add LAN8700 phy support
` [PATCHv2 10/11] fec: Add ARCH_MX5 as a dependency
` [PATCHv2 11/11] mxc: Add imx51_defconfig
Ignore [PATCH v3 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442
2010-02-04 0:51 UTC
[PATCH v3 2/7 RE-SEND-3] ARM: S5P6442: Add clock support for S5P6442
2010-02-04 0:42 UTC
[PATCH v3 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442
2010-02-04 0:16 UTC
[RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults
2010-02-04 0:09 UTC (3+ messages)
[spi-devel-general] PATCH [1/1] SPI: AMBA_PL022: Limit TX FIFO fills based on current RX FIFO used
2010-02-03 22:15 UTC (3+ messages)
[PATCH] MX1/MX2: -EINVAL overwritten in second iteration in mxc_gpio_setup_multiple_pins()
2010-02-03 20:56 UTC (2+ messages)
[PATCH] input: support onkey in 88pm860x
2010-02-03 20:40 UTC
[PATCH] input: update 88pm860x driver
2010-02-03 20:39 UTC
[PATCH] mfd: use genirq in 88pm860x
2010-02-03 20:39 UTC
[PATCH] mfd: use i2c_dummy in 88pm860x
2010-02-03 20:38 UTC
[PATCH] mfd: clean code in max8925
2010-02-03 20:37 UTC
32-bit Thumb-2 breakpoints
2010-02-03 17:45 UTC (30+ messages)
[PATCH 0/9] omap fixes for 2.6.33-rc6
2010-02-03 17:25 UTC (16+ messages)
` [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1
` [PATCH 2/9] omap: Remove old unused defines for OMAP_32KSYNCT_BASE
` [PATCH 3/9] ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
` [PATCH 4/9] OMAP2/3: IRQ: ensure valid base address
` [PATCH 5/9] OMAP2/3: GPMC: ensure valid clock pointer
` [PATCH 6/9] omap: Fix 3630 mux errors
` [PATCH 7/9] omap: Fix arch/arm/mach-omap2/mux.c: Off by one error
` [PATCH 8/9] omap: Fix access to already released memory in clk_debugfs_register_one()
` [PATCH 9/9] omap: Disable serial port autoidle by default
[RFC 00/18] generic arm needed for msm
2010-02-03 14:59 UTC (5+ messages)
` [RFC 05/18] arm: msm: implement ioremap_strongly_ordered
[patch v2 1/2] at91_udc.c read_fifo timing issue
2010-02-03 14:37 UTC (5+ messages)
` [patch v3 0/3] at91_udc: fix soft lockup, HW glitch and use spinlocks
` [patch v3 1/3] Fix soft lockup in at91 udc driver
` [patch v3 2/3] at91_udc HW glitch
` [patch v3 3/3] at91_udc.c use spinlocks instead of local_irq_xxx
[PATCH 4/5] input: update 88pm860x driver
2010-02-03 13:03 UTC
[PATCH 3/5] mfd: use genirq in 88pm860x
2010-02-03 13:03 UTC
[PATCH 2/5] mfd: use i2c_dummy in 88pm860x
2010-02-03 13:02 UTC
[PATCH 1/5] mfd: clean code in max8925
2010-02-03 13:01 UTC
[PATCH 13/16] ARM: LPC32XX: Various fixes with readl/writel types
2010-02-03 10:20 UTC (2+ messages)
[PATCH 10/16] ARM: LPC32XX: Converted most register types to void __iomem *
2010-02-03 10:18 UTC (3+ messages)
[PATCH 02/16] ARM: LPC32XX: removed extra include statement
2010-02-03 10:08 UTC (2+ messages)
Uncompressing broken with commit e7db7b4270
2010-02-03 9:41 UTC (7+ messages)
[PATCH/RFC v2.1 0/2] Mem-to-mem device framework
2010-02-03 8:44 UTC (5+ messages)
[PATCH 1/1] mmp2: add handling on PMIC IRQ
2010-02-03 7:42 UTC (5+ messages)
[PULL] Please pull bjdooks' for-rmk/samsung4
2010-02-03 2:11 UTC
[PATCH 1/4] mfd: update i2c driver for max8925
2010-02-03 1:44 UTC (5+ messages)
[PATCH 16/16] ARM: LPC32XX: Fix sparse errors on LCD code
2010-02-02 23:59 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).