messages from 2010-02-18 08:53:00 to 2010-02-22 18:16:57 UTC [more...]
[PATCH 00/10] ARM: ftrace: cleanups, Thumb-2, and dynamic ftrace
2010-02-22 18:16 UTC (5+ messages)
` [PATCH 02/10] ARM: ftrace: document mcount formats
[PATCH] jffs2: fix memory leak if the sector was successfully erased
2010-02-22 17:40 UTC (5+ messages)
[PATCH] ep93xx: fix broken build of clock.c
2010-02-22 17:24 UTC
[PATCH 1/1] MX35: Add CUPID board support
2010-02-22 16:58 UTC
[PATCH][KS8695] Mark network interface as running on ifconfig up
2010-02-22 15:47 UTC (3+ messages)
pull request for .34
2010-02-22 10:58 UTC (4+ messages)
atmel-mci / at91_mci
2010-02-22 9:56 UTC (5+ messages)
[PATCH 0/4] s3c24xx_ts driver fixes
2010-02-22 9:03 UTC (23+ messages)
` [PATCH 1/4] Add resources description for s3c24xx ts driver
` [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down
` [PATCH 3/4] s3c24xx_adc: disable/enable IRQ on suspend/resume
` [PATCH 4/4] s3c24xx_ts: re-enable IRQ on resume
Interrupt registering for PIO problem in ATMEL chips
2010-02-22 8:36 UTC
[PATCH] Documentation: remove obsolete arm/Sharp-LH/LPD7A400 file
2010-02-21 22:57 UTC (2+ messages)
[PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI
2010-02-21 21:07 UTC (2+ messages)
[PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send
2010-02-21 11:20 UTC (7+ messages)
[PATCH 0/3] MXC PCMCIA Support
2010-02-21 9:21 UTC (7+ messages)
` [PATCH 1/3] PCMCIA: Add soc_common support for banked SoC drivers
` [PATCH 2/3] MXC: add pcmcia support
` [PATCH 3/3] PCMCIA: Add support for freescale MX2/3 SoCs
LPC32XX architecture files (updated v4)
2010-02-20 19:17 UTC (19+ messages)
` [PATCH 01/13] ARM: LPC32XX: Initial architecture header files
` [PATCH 02/13] ARM: LPC32XX: Debug and IRQ macros
` [PATCH 03/13] ARM: LPC32XX: Clock driver
` [PATCH 04/13] ARM: LPC32XX: GPIO, timer, and IRQ drivers
` [PATCH 05/13] ARM: LPC32XX: System suspend support
` [PATCH 06/13] ARM: LPC32XX: Serial support code
` [PATCH 07/13] ARM: LPC32XX: Misc support functions
` [PATCH 08/13] ARM: LPC32XX: Phytec 3250 platform support
` [PATCH 09/13] ARM: LPC32XX: Arch config menu supoport and makefiles
` [PATCH 10/13] ARM: LPC32XX: Default PHY3250 kernel config (ramdisk)
` [PATCH 11/13] ARM: Add support for the LPC32XX arch
` [PATCH 12/13] i2c: "
` [PATCH 13/13] WATCHDOG: "
[PATCH 00/11] omap updates for 2.6.34, part 4
2010-02-20 8:30 UTC (17+ messages)
` [PATCH 01/11] USB: Add empty functions in otg.h
` [PATCH 02/11] omap: musb: Remove #ifdef from board-omap3evm.c
` [PATCH 03/11] arm: omap: musb: ioremap only what's ours
` [PATCH 04/11] omap: musb: Pass board specific data from board file
` [PATCH 05/11] omap: musb: remove unused data
` [PATCH 06/11] arm: omap: musb: we can use clk framework
` [PATCH 07/11] omap: musb: remove unused soft_con field
` [PATCH 08/11] omap: musb: remove unused dma data
` [PATCH 09/11] omap: musb: remove unnecessary return
` [PATCH 10/11] omap: musb: get rid of dyn_fifo
` [PATCH 11/11] omap: musb: Add USB support to 4430 SDP board file
USB mass storage and ARM cache coherency
2010-02-20 7:21 UTC (8+ messages)
[PATCH] pxamci: close a serious race
2010-02-20 0:04 UTC (3+ messages)
[PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
2010-02-19 23:44 UTC (7+ messages)
RFC patch set - kirkwood/sheeva - enable eSATA port
2010-02-19 22:11 UTC (5+ messages)
` [PATCH] 1/3 kirkwood/sheeva: basic board support
` [PATCH] 2/3 kirkwood/sheeva: configure SoC SATA interface
` [PATCH] 3/3 kirkwood/sheeva: correlate MPP to SD CD and SD WP
USB mass storage and ARM cache coherency
2010-02-19 20:53 UTC (4+ messages)
[PATCH 0/7] Add basic ARM device tree support
2010-02-19 19:29 UTC (8+ messages)
` [PATCH 1/7] arm-dt: Add ATAG_DEVTREE tag
` [PATCH 2/7] arm-dt: Allow CONFIG_OF on ARM
` [PATCH 3/7] arm-dt: add devictree node reference to dev_archdata
` [PATCH 4/7] arm/devicetree: Reserve memory used by dtb blob
` [PATCH 5/7] arm-dt: unflatten device tree
` [RFC/PATCH 6/7] arm/devicetree: Allow .dtb to be carried in the zImage payload
` [PATCH 7/7] arm/boot/hack: set uImage load address to 0x81000000
[PATCH] arm: Allow mounting root on omaps with CPU_V6 and CPU_V7
2010-02-19 19:25 UTC (4+ messages)
[PATCH] Help fix SMP boot issues with L2 cache
2010-02-19 15:42 UTC (6+ messages)
Uncompressing broken with commit e7db7b4270
2010-02-19 15:27 UTC (9+ messages)
[PATCH 1/1] MX35: Add CUPID board support
2010-02-19 14:54 UTC (2+ messages)
Kernel panic due to page migration accessing memory holes
2010-02-19 13:48 UTC (13+ messages)
What's cooked in 'devel' branch of pxa for next merge window
2010-02-19 12:12 UTC (3+ messages)
[PATCH 1/1] add mx3 cupid bsp
2010-02-19 10:18 UTC (2+ messages)
LPC32XX architecture files (updated v3)
2010-02-19 9:21 UTC (11+ messages)
` [PATCH 03/14] ARM: LPC32XX: Clock driver
` [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file
[PATCH] ARM: fix documentation of the PrimeCell bus
2010-02-19 8:52 UTC
Alignment Requirement for MT_MEMORY type
2010-02-19 8:44 UTC (4+ messages)
[PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
2010-02-19 7:38 UTC (4+ messages)
[PATCH 1/9] omap3/4: uart: fix full-fifo write abort
2010-02-19 5:25 UTC (16+ messages)
` [PATCH 2/9] omap2/3/4: ioremap omap_globals module
` [PATCH 3/9] omap4: sdma: Enable the idle modes on omap4
` [PATCH 4/9] omap: sdma: Limit the secure reserve channel fix for omap3
` [PATCH 5/9] omap4: Fix omap_type() for omap4
` [PATCH 6/9] omap3/4: Remove overlapping mapping of L4_WKUP io space
` [PATCH 7/9] omap4: Add auto-generated irq and dma headers
` [PATCH 8/9] omap4: Use dma line defines from dma-44xx.h
` [PATCH 9/9] omap4: Use irq line defines from irq-44xx.h
[PATCH]NUC900 add gpio virtual memory map
2010-02-19 2:42 UTC (5+ messages)
` [Linux-arm-nuc900] "
[PATCH 7/7] DMAENGINE: add COH 901 318 AMBA/PrimeCell extension
2010-02-19 0:06 UTC
[PATCH 6/7] fix COH 901 318 memcpy and slave issues
2010-02-19 0:06 UTC
[PATCH 5/7] ARM: U300: add MMCI DMA platform config
2010-02-19 0:05 UTC
[PATCH 4/7] ARM: MMCI: add DMA support using dmaengine
2010-02-19 0:05 UTC
[PATCH 2/7] ARM: MMCI: pass max frequency from platform
2010-02-19 0:05 UTC
[PATCH 1/7] ARM: MMCI: remove custom DBG macro and printk
2010-02-19 0:05 UTC
[PATCH 0/7] PrimeCell DMA Device
2010-02-19 0:05 UTC
[GIT PULL] gemini fix for 2.6.33-rc8
2010-02-18 21:11 UTC (3+ messages)
` [PATCH 1/2] Gemini: wrong registers used to set reg_level in gpio_set_irq_type()
` [PATCH 2/2] MAINTAINERS: fix my e-mail and status for Gemini and FA526
Compiler for Atmel AT91SAMG20
2010-02-18 21:03 UTC (4+ messages)
[PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
2010-02-18 20:34 UTC (2+ messages)
[PATCH 5/5] pxa/zeus: Add support for mcp2515 CAN bus
2010-02-18 20:33 UTC
[PATCH 4/5] watchdog: add support for onboard max6369 to Arcom Zeus
2010-02-18 20:31 UTC
[PATCH 3/5] Add Eurotech as the manufacturer of the Zeus board
2010-02-18 20:30 UTC
[PATCH 2/5] Correct the USB host initialisation flags of Arcom/Eurotech Zeus SBC
2010-02-18 20:29 UTC
[GIT PULL] omap fix for 2.6.33-rc8
2010-02-18 20:29 UTC
[PATCH 0/5] Zeus fixes for 2.6.34
2010-02-18 20:23 UTC
PL-330 DMA driver
2010-02-18 17:55 UTC (5+ messages)
[PATCH 0/9] omap4 updates for 2.6.34
2010-02-18 17:37 UTC (3+ messages)
[PATCH/RFC] arm: Enable backtrace printing on oops when PC is corrupted
2010-02-18 17:07 UTC (3+ messages)
` [PATCH/RFC] arm: Enable backtrace printing on oops when PC iscorrupted
[PATCH] ARM: Fix build error for arm1026ej-s processor
2010-02-18 16:38 UTC (2+ messages)
[PATCH 1/1] add mx3 cupid bsp
2010-02-18 16:36 UTC (2+ messages)
[PATCH] Add resources description for s3c24xx ts driver
2010-02-18 15:00 UTC (2+ messages)
[PATCH 1/1] add mx3 cupid bsp
2010-02-18 14:06 UTC
NDCBx registers in PXA3XX MTD driver
2010-02-18 13:11 UTC (3+ messages)
[PATCH 7/9 v2] omap4: Add auto-generated irq and dma headers
2010-02-18 10:44 UTC
[PATCH 1/2] ARM: S3C64XX: Declare IISv4 PCLK for S3C6410
2010-02-18 9:32 UTC (4+ messages)
` [PATCH 2/2] ARM: SMDK6410: Register IISv4 device
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).