messages from 2010-05-11 11:06:45 to 2010-05-12 22:47:11 UTC [more...]
Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)
2010-05-12 22:47 UTC (7+ messages)
[PATCH] h1940: framebuffer configuration fix
2010-05-12 22:43 UTC (2+ messages)
[PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data
2010-05-12 22:24 UTC (9+ messages)
` [PATCHv5 1/3] procfs: Introduce socinfo under /proc
` [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo
` [PATCHv5 3/3] OMAP3: export chip IDCODE, Production ID and Die ID
[PATCH 1/2] nomadik hwrng: Add clock support
2010-05-12 22:15 UTC (4+ messages)
[PATCH 00/25] *** SUBJECT HERE ***
2010-05-12 21:47 UTC (2+ messages)
[PATCH 25/25] msm: 7x30 Kconfig and makefile changes
2010-05-12 21:45 UTC
[PATCH 24/25] msm: clock support for the MSM7x30 CPU
2010-05-12 21:45 UTC
[PATCH 23/25] msm: physical offset for MSM7X30
2010-05-12 21:45 UTC
[PATCH 22/25] msm: io: add io support for 7x30
2010-05-12 21:45 UTC
[PATCH 21/25] msm: Add extern for 7x30 clock list
2010-05-12 21:45 UTC
[PATCH 20/25] msm: dma: add 7x30 security domain abstraction
2010-05-12 21:45 UTC
[PATCH 19/25] msm: update basic board layout for MSM7x30
2010-05-12 21:45 UTC
[PATCH 18/25] msm: add devices-msm7x30.c
2010-05-12 21:45 UTC
[PATCH 17/25] msm: add msm_iomap-7x30.h for MSM7x30 support
2010-05-12 21:45 UTC
[PATCH 16/25] msm: irqs: add irqs-7x30.h for MSM7x30 support
2010-05-12 21:45 UTC
[PATCH 15/25] msm: 8x50 Kconfig changes
2010-05-12 21:45 UTC
[PATCH 14/25] msm: physical offset for QSD8x50
2010-05-12 21:45 UTC
[PATCH 13/25] msm: io: add io support for 8x50
2010-05-12 21:45 UTC
[PATCH 12/25] msm: add extern for 8x50 clock list
2010-05-12 21:45 UTC
[PATCH 11/25] msm: add devices-qsd8x50.c
2010-05-12 21:45 UTC
[PATCH 10/25] msm: update basic board layout for QSD8x50
2010-05-12 21:45 UTC
[PATCH 09/25] msm: add msm_iomap-8x50.h for QSD8x50 support
2010-05-12 21:45 UTC
[PATCH 08/25] msm: irqs: add irqs-8x50.h for QSD8x50 support
2010-05-12 21:45 UTC
[PATCH 07/25] msm: add Qualcomm 7x30 interrupt controller driver
2010-05-12 21:45 UTC
[PATCH 06/25] msm: add tlmm support for gpio
2010-05-12 21:45 UTC
[PATCH 05/25] msm: generalize clock support
2010-05-12 21:45 UTC
[PATCH 04/25] msm: add sirc interrupt controller driver
2010-05-12 21:45 UTC
[PATCH 03/25] msm: generialize iomap to support multiple SOCs
2010-05-12 21:45 UTC
[PATCH 02/25] msm: generialize IRQ to support multiple SOCs
2010-05-12 21:45 UTC
[PATCH 01/25] msm: generalization to support multiple SOCs
2010-05-12 21:45 UTC
arm926_dma_flush_range undefined!
2010-05-12 21:39 UTC (14+ messages)
` [PATCH] MMC: at91_mci: modify cache flush routines
[PATCH 0/8] Various patches for comments and upstream
2010-05-12 21:21 UTC (11+ messages)
` [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops
` [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 "
Unnecessary double check of PIO_ISR in gpio_irq_handler?
2010-05-12 21:20 UTC (2+ messages)
asmlinkage
2010-05-12 20:13 UTC (2+ messages)
[PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface
2010-05-12 19:11 UTC (5+ messages)
` [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27
` [PATCH 3/3] mx25: add support for the CSI device
current next-samsung
2010-05-12 19:06 UTC (4+ messages)
[PATCH 0/1 v2] mx31: Fix usb otg host initialisation
2010-05-12 18:50 UTC (5+ messages)
` [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG "
[PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6
2010-05-12 18:35 UTC (6+ messages)
OTG implementation with external transceiver on PXA270
2010-05-12 18:23 UTC (3+ messages)
[PATCH] ARM: Samsung: S5PC100 platform cleanup
2010-05-12 17:48 UTC (40+ messages)
` [PATCH 01/16] ARM: S5PC1xx rename registers to match plat-s5p style
` [PATCH 03/16] ARM: Samsung: plat-s5p - enable access to clk_27m clock
` [PATCH 04/16] ARM: S5PC100: copy clocks from plat-s5pc1xx
` [PATCH 05/16] ARM: S5PC100: new clocks definition
` [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework
` [PATCH 07/16] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
` [PATCH 08/16] ARM: S5PC100: Move frame buffer helpers "
` [PATCH 09/16] ARM: SMDKC100: enable frame buffer again
` [PATCH 10/16] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
` [PATCH 11/16] ARM: SMDKC100: enable i2c support again
` [PATCH 12/16] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100
` [PATCH 13/16] ARM: SMDKC100: enable sdhci support again
[PATCH 0/4] ARM: Gemini: board/maintainer updates
2010-05-12 17:20 UTC (3+ messages)
` [PATCH 3/4] ARM: Gemini: add support for Raidsonic IB4220
[PATCH] qnap tsx1x: fix section mismatch
2010-05-12 15:37 UTC
Linux Bluetooth HFP through usp pcm design questions
2010-05-12 13:27 UTC (2+ messages)
[PATCH 5/9] Add support for red flashing LED on Acer n35
2010-05-12 13:26 UTC (15+ messages)
` [PATCH 1/8] Enable Acer n35 architecture if Acer n30 is selected
` [PATCH 2/8] fix: suspended wrong USB port on Acer n35
` [PATCH 3/8] Add RTC platform device for Acer n30 / "
` [PATCH 4/8] Add support for LEDs on "
` [PATCH 5/8] Enable wake-up by Power button "
` [PATCH 6/8] Add support for MMC card reader on Acer n30 / "
` [PATCH 7/8] Add support for power on/off on Acer n30 / Acer n35 MMC card reader
` [PATCH 8/8] Add support for backlight regulation on Acer n35
` Acer n35 patches
next-samsung: acer n30/n35 updates
2010-05-12 13:22 UTC (4+ messages)
[BUG] bug when enabling VM DEBUG
2010-05-12 13:06 UTC (6+ messages)
[PATCH 2/2] mx25: properly initialize clocks, fix time accounting
2010-05-12 12:09 UTC (7+ messages)
` [PATCH 3/4] mx25: "
[PATCH v2] [RESEND] Handle instruction cache maintenance fault properly
2010-05-12 11:01 UTC (2+ messages)
[PATCH v2] ARM: S5PV210: Add S5PV210 GPIO support
2010-05-12 10:38 UTC (3+ messages)
L2 cache support for pxa16x
2010-05-12 10:11 UTC (2+ messages)
[PATCH 4/6] ARM: oprofile: use perf-events framework as backend
2010-05-12 9:32 UTC (2+ messages)
[PATCH] DMA: PL330: Add dma api driver
2010-05-12 8:37 UTC (2+ messages)
[PATCH 1/2] pxa/colibri270: Add TSC support
2010-05-12 7:34 UTC (3+ messages)
` [PATCH 2/2] pxa/income: Add Income SBC support
[PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code
2010-05-12 7:25 UTC (17+ messages)
` [PATCH 02/15] serial: Use s3c2440 driver for S3C2416 SoC
` [PATCH 03/15] ARM: S3C2416: Add S3C2416-specific registers definitions
` [PATCH 04/15] ARM: SAMSUNG: Move S3C6400 PLL code to <plat/pll.h> for re-use
` [PATCH 05/15] ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usage
` [PATCH 06/15] ARM: S3C2416: Add arch support
` [PATCH 07/15] ARM: S3C2416: Add initial support of SMDK2416
` [PATCH 08/15] ARM: S3C24XX: Identify S3C2416 if S3C2412/S3C2413 built in
` [PATCH 09/15] ARM: S3C2443: Move parts of the clock code to common clock file
` [PATCH 10/15] ARM: S3C2416: Add basic clock support
` [PATCH 11/15] ARM: S3C2416: Add support for second HSMMC channel
` [PATCH 12/15] ARM: S3C2416: Add support for OHCI on SMDK2416
` [PATCH 13/15] ARM: S3C2416: Use s3c2440 style i2c controller
` [PATCH 14/15] ARM: S3C2413: Update GPIO pull-up support
` [PATCH 15/15] ARM: SAMSUNG: Update S3C2416 entry with S3C2450
[PATCH] s3c244x: fix gpiolib port J support
2010-05-12 7:22 UTC
[PATCH v2 0/5] HP iPAQ RX1950 patch series
2010-05-12 7:18 UTC (3+ messages)
[GIT PULL] pxa: patches for .35 merge window (34-rc7 based)
2010-05-12 7:15 UTC (3+ messages)
[PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue
2010-05-12 5:28 UTC
[PATCHv2 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core
2010-05-12 3:44 UTC (4+ messages)
` [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2
[PATCH] ARM: SAMSUNG: Remove old email address for ben-linux@fluff.org
2010-05-12 1:14 UTC
[PATCH] s3c24xx: Fix handling of level irqs for external interrupts
2010-05-12 1:01 UTC (2+ messages)
[PATCH 0/6] OMAP PM core updates for 2.6.35 [updated]
2010-05-11 23:47 UTC (7+ messages)
` [PATCH 1/6] OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs
` [PATCH 2/6] OMAP3: PM: Add milliseconds interface to suspend wakeup timer
` [PATCH 3/6] OMAP3EVM: Update pad configuration for wakeup enabled pads
` [PATCH 4/6] OMAP3: PM: Enable wakeup from ads7846 touchscreen
` [PATCH 5/6] OMAP3: PM: Enable IO / IO-CHAIN wakeups for PER
` [PATCH 6/6] OMAP3: PM: Remove PER wakeup dependency on CORE
[PATCH 0/6] OMAP GPIO updates for 2.6.35
2010-05-11 23:30 UTC (7+ messages)
` [PATCH 1/6] OMAP3: GPIO fixes for off-mode
` [PATCH 2/6] OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs
` [PATCH 3/6] OMAP2/3: GPIO: generalize prepare for idle
` [PATCH 4/6] OMAP3: GPIO: disable GPIO debounce clocks on idle
` [PATCH 5/6] OMAP3: GPIO: Removed a couple of unneeded registers from context save/restore
` [PATCH 6/6] OMAP: GPIO: remove duplicate debugfs interface
[PATCH 1/2] pxa/vpac270: Enable SparseMEM for 256 MB of RAM
2010-05-11 23:24 UTC (2+ messages)
[PATCHv2 0/2] VFP context save/restore for OMAP3
2010-05-11 21:27 UTC (5+ messages)
` [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support
PATCHv1 0/1 Enable ulpi phy on freescale mx51 babbage hw
2010-05-11 18:53 UTC (2+ messages)
` [PATCH 2.6.34-rc7] mx5: bring usb ulpi phy out of reset "
PXA/8250 UART Conflicts
2010-05-11 16:29 UTC (3+ messages)
[PATCH 0/3] mx31moboard OTG host support
2010-05-11 15:44 UTC (4+ messages)
` [PATCH 1/3] mx31moboard: Fix usb PHY reset
[PATCH 0/3 v2] mx31moboard: OTG host support
2010-05-11 14:57 UTC (4+ messages)
` [PATCH 1/3] mx31moboard: Fix usb PHY reset
` [PATCH 2/3] mx31moboard: Move usb OTG device registration
` [PATCH 3/3] mx31moboard: OTG host support for smartbot board
[PATCH 1/1] silence a bogus sparse warning in unwind.c
2010-05-11 14:55 UTC (2+ messages)
[PATCH 0/1] mx31: Fix usb otg host initialisation
2010-05-11 11:06 UTC (4+ messages)
` [PATCH 1/1] ehci-mxc: Fix mx31 OTG "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).