messages from 2010-07-20 21:56:05 to 2010-07-22 10:39:41 UTC [more...]
[PATCH 0/6] debug macro fixups
2010-07-22 10:39 UTC (6+ messages)
` [PATCH 5/6] arm/ns9xxx: fix debug macro compilation failure
` [PATCH 6/6] arm/shark: "
[RFC,PATCH 0/3] Allow late mdesc detection, v2
2010-07-22 10:35 UTC (13+ messages)
` [RFC,PATCH 3/3] arm: remove machine_desc.io_pg_offst and .phys_io
` [RFC, PATCH "
[PATCH] ARM: Versatile Express: Add default memory layout
2010-07-22 10:30 UTC (2+ messages)
[PATCH v4 0/7] ARM: S5PV210: CPUFREQ Initial Support
2010-07-22 10:21 UTC (9+ messages)
` [PATCH v4 1/7] ARM: S5PV210: Allow to probe whether workaround codes are required
` [PATCH v4 2/7] ARM: Samsung SoC: added hclk/pclk info to s3c_freq for s5pv210 cpu-freq
` [PATCH v4 3/7] ARM: S5P: Added default pll values for APLL 800/1000MHz
` [PATCH v4 4/7] ARM: S5P: Virtual Addresses for DMCx registers
` [PATCH v4 5/7] ARM: S5PV210: Access "
` [PATCH v4 6/7] ARM: S5PV210: macros for clock registers at regs-clock.h
` [PATCH v4 7/7] ARM: S5PV210: Initial CPUFREQ Support
[PATCH 0/9] CM's patches for the next merging window(s)
2010-07-22 10:03 UTC (2+ messages)
[PATCH v2] arm: use addruart macro to establish debug mappings
2010-07-22 9:44 UTC (2+ messages)
[PATCH] Introduce 'struct machine_class' for SoC level abstraction
2010-07-22 9:36 UTC (2+ messages)
[PATCH v4] Samsung: add new card detection methods in s3c-sdhci driver (platform part)
2010-07-22 9:30 UTC (2+ messages)
` [PATCH v4] sdhci-s3c: add support for new card detection methods (driver part)
ARM Machine SoC I/O setup and PAD initialization code
2010-07-22 9:14 UTC (12+ messages)
[PATCH] Make SPARSE_IRQ a hidden option
2010-07-22 8:47 UTC (2+ messages)
The three U6715 patches after third review
2010-07-22 8:40 UTC (3+ messages)
` [PATCH 1/3] U6/U6715 ARM architecture files
Random crash using fork in a multithreaded application
2010-07-22 8:33 UTC (2+ messages)
[PATCH v3] Samsung: sdhci-s3c: add support for new card detection methods
2010-07-22 8:25 UTC (5+ messages)
[PATCH/RFC] Runtime PM: ARM: subarch-specific extensions of pdev_archdata
2010-07-22 8:06 UTC (7+ messages)
` [linux-pm] "
[PATCH] ARM/nuc900: patch for modifying spi flash configuration
2010-07-22 8:02 UTC (2+ messages)
[PATCH] Add support for Vista Silicon Visstrim_m10 board [v4]
2010-07-22 8:02 UTC (2+ messages)
[PATCH] arm: show_regs dump stack when ARM_UNWIND enable
2010-07-22 8:00 UTC (6+ messages)
[PATCH]HRT support in Samsung S5P Platform
2010-07-22 7:55 UTC (5+ messages)
[RFC 3/3] mm: iommu: The Virtual Contiguous Memory Manager
2010-07-22 7:51 UTC (7+ messages)
[RFC 1/3 v3] mm: iommu: An API to unify IOMMU, CPU and device memory management
2010-07-22 7:39 UTC (38+ messages)
[PATCH 0/3] Enable pxa310 usb otg port host mode
2010-07-22 7:21 UTC (5+ messages)
at91sam9g45 custom board booting problem
2010-07-22 7:11 UTC
[PATCH] Add support for Vista Silicon Visstrim_m10 board [v3]
2010-07-22 7:03 UTC (2+ messages)
[PATCH] Add support for Vista Silicon Visstrim_m10 board[v2]
2010-07-22 6:47 UTC (3+ messages)
[PATCH 0/5] add flexcan support to i.mx
2010-07-22 6:34 UTC (8+ messages)
` [PATCH 1/5] mx25: flexcan clock support
` [PATCH 2/5] mx25: Add flexcan devices
` [PATCH 3/5] mx35: adjust flexcan clock definition
` [PATCH 4/5] mx35: add flexcan devices
` [PATCH 5/5] pcm043: register flexcan device
[PATCH] fec: use interrupt for MDIO completion indication
2010-07-22 6:17 UTC (5+ messages)
[PATCH 0/2] Updates Samsung RTC driver for clock enabling support
2010-07-22 6:09 UTC (4+ messages)
` [PATCH 1/2] ARM: S3C64XX: Move RTC clock from init_clocks to init_clocks_disable
` [PATCH 2/2] rtc: rtc-s3c: Updates RTC driver for clock enabling support
` [rtc-linux] "
[PATCH v3 2/8] ARM: S5PV310: Add new CPU initialization support
2010-07-22 2:49 UTC (5+ messages)
[PATCH 0/3] Updates RTC driver for Samsung S3C64XX and newer SoCs
2010-07-22 1:50 UTC (6+ messages)
` [PATCH 1/3] ARM: SAMSUNG: Updates RTC register for support Alarm IRQ and Time Tick
` [PATCH 2/3] rtc: rtc-s3c: Updates driver for S3C64XX and newer SoCs
` [PATCH 3/3] rtc: rtc-s3c: Add BCD register initialization codes
` [rtc-linux] "
Question about armv7(cortex-a9) dcache initialization
2010-07-22 1:12 UTC
[PATCH v3 0/7] ARM: S5PV210: CPUFREQ Initial Support
2010-07-22 0:57 UTC (15+ messages)
` [PATCH v3 1/7] ARM: S5PV210: Add a Kconfig entry "S5PC110_EVT0_WORKAROUND"
` [PATCH v3 2/7] ARM: Samsung SoC: added hclk/pclk info to s3c_freq for s5pv210 cpu-freq
` [PATCH v3 3/7] ARM: S5P: Added default pll values for APLL 800/1000MHz
` [PATCH v3 4/7] ARM: S5P: Virtual Addresses for DMCx registers
` [PATCH v3 5/7] ARM: S5PV210: macros for clock registers at regs-clock.h
using openocd + gdb to debug linux kernel on arm926ejs
2010-07-21 22:44 UTC (5+ messages)
` debugging kernel with gdb
[PATCH 2/2] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells v3
2010-07-21 22:06 UTC
[PATCH 1/2] DMAENGINE: correct PL080 register header file
2010-07-21 22:06 UTC
[PATCH v2 00/20] native support for wl1271 on ZOOM
2010-07-21 18:55 UTC (24+ messages)
` [PATCH v2 01/20] sdio: add TI + wl1271 ids
` [PATCH v2 02/20] wireless: wl1271: remove SDIO IDs from driver
` [PATCH v2 03/20] mmc: support embedded data field in mmc_host
` [PATCH v2 04/20] omap zoom2: wlan board muxing
` [PATCH v2 05/20] omap zoom3: "
` [PATCH v2 06/20] wireless: wl1271: make wl12xx.h common to both spi and sdio
` [PATCH v2 07/20] wireless: wl1271: support return value for the set power func
` [PATCH v2 08/20] wireless: wl1271: take irq info from private board data
` [PATCH v2 09/20] wireless: wl1271: make ref_clock configurable by board
` [PATCH v2 10/20] omap: zoom: add fixed regulator device for wlan
` [PATCH v2 11/20] omap: hsmmc: support mmc3 regulator power control
` [PATCH v2 12/20] omap: hsmmc: allow board-specific settings of private mmc data
` [PATCH v2 13/20] omap: zoom: add mmc3/wl1271 device support
` [PATCH v2 14/20] mmc: sdio: fully reconfigure oldcard on resume
` [PATCH v2 15/20] mmc: sdio: verify existence of resume handler
` [PATCH v2 16/20] mmc: introduce API to control the card's power
` [PATCH v2 17/20] mmc: sdio: relocate sdio_set_block_size call
` [PATCH v2 18/20] mmc: sdio: enable a default power off mode of the card
` [PATCH v2 19/20] omap: zoom: keep the MMC3 wl1271 device powered off
` [PATCH v2 20/20] wireless: wl1271: call SDIO claim/release power API
Introducing the LCD-Linux project
2010-07-21 16:38 UTC (2+ messages)
[RFC] arm: versatile: enable PCI I/O space
2010-07-21 16:36 UTC (4+ messages)
` [PATCH v2] "
` [PATCH] arm: remove __io() abuses
[PATCH 0/3] Generic ULPI driver extention
2010-07-21 14:47 UTC (2+ messages)
[PATCH v2] otg/ulpi.c : fix register write
2010-07-21 14:46 UTC (3+ messages)
[PATCH v2 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440
2010-07-21 14:02 UTC (4+ messages)
drivers/scsi/arm/acornsci.c -- Dead CONFIG_* options
2010-07-21 13:52 UTC
[PATCH] ARM: SAMSUNG: Make RTC driver dependency SoC specific instead of machine specific
2010-07-21 13:31 UTC (4+ messages)
[PATCH v2 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
2010-07-21 13:23 UTC (2+ messages)
[PATCH 1/3] i.MX51: handle IRQ for gpio 16..31
2010-07-21 12:46 UTC (8+ messages)
` [PATCH 2/3] iomux-mx51: add 4 pin definitions
` [PATCH 3/3] i.MX51: add support for cpuimx51 module and its baseboard
` [PATCH v2 "
` [PATCH v2 1/3] i.MX51: handle IRQ for gpio 16..31
[PATCH v6 1/3] ARM: SAMSUNG: Add keypad device support
2010-07-21 12:39 UTC (12+ messages)
` [PATCH v6 3/3] input: samsung-keypad - Add samsung keypad driver
[PATCH v2 0/8] ARM: S5PV310: Add support for Samsung S5PV310 SoC
2010-07-21 12:33 UTC (4+ messages)
` [PATCH v2 7/8] ARM: S5PV310: Add Board support file
[PATCH]HRT support in Samsung S5P Platform
2010-07-21 11:54 UTC
[PATCH 0/3] Add support I2C devices on SMDK6440, SMDKC110 and SMDKV210
2010-07-21 10:50 UTC (4+ messages)
` [PATCH 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440
[PATCH] serial: samsung.c: Add FRACVAL support for newer UART
2010-07-21 9:20 UTC (3+ messages)
[PATCH v3] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver
2010-07-21 9:12 UTC (2+ messages)
[PATCH] mx27_3ds: add support for the keypad
2010-07-21 9:10 UTC (2+ messages)
[PATCH 0/5] Add RTC support SMDK6410, SMDKC100, SMDKC110 and SMDKV210
2010-07-21 9:00 UTC (6+ messages)
` [PATCH 1/5] ARM: S3C64XX: Add RTC support for S3C64XX
` [PATCH 2/5] rtc: rtc-s3c: Add extra option to include RTC for Samsung SoCs
` [PATCH 3/5] ARM: S5P6440: Add RTC support for S5P6440
` [PATCH 4/5] ARM: S5PC100: Add RTC support for S5PC100
` [PATCH 5/5] ARM: S5PV210: Add RTC support for S5PV210 and S5PC110
[PATCH 0/5] Makefile.boot cleanup
2010-07-21 8:20 UTC (6+ messages)
[PATCH 0/4] ARM: S5PV210: Clock Framework: powerdomain, block-gating, flags
2010-07-21 7:23 UTC (5+ messages)
Your patch: ARM: AMBA: Add pclk definition for platforms using primecells
2010-07-21 7:23 UTC (4+ messages)
[PATCH] ARM: S5P: Changes the definition name of default UART registers
2010-07-21 7:00 UTC
[RFC 1/3 v3] mm: iommu: An API to unify IOMMU, CPU and device memory management
2010-07-21 5:18 UTC
[RFC PATCH] arm/imx/gpio: add spinlock protection
2010-07-21 5:10 UTC (3+ messages)
` [PATCH v2] "
[PATCH v5 0/4] s3c24xx: iPAQ rx1950 series
2010-07-21 0:42 UTC (3+ messages)
` [PATCH v5 3/4] Add s3c-adc-battery driver
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).