messages from 2010-12-06 22:27:23 to 2010-12-08 01:47:28 UTC [more...]
[PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier
2010-12-08 1:47 UTC (7+ messages)
` [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S
[PATCH 0/4] Create omap1_defconfig, remove other omap1 configs
2010-12-08 1:29 UTC (5+ messages)
` [PATCH 1/4] omap: Disable omap_read/write functions for omap2+
` [PATCH 3/4] omap1: Add omap1_defconfig
[PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device
2010-12-08 1:04 UTC (16+ messages)
` [PATCH v8 04/11] OMAP7xx: GPIO: Introduce support for GPIO init
` [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device
` [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx
[PATCH 0/3] Common struct clk implementation, v7
2010-12-08 1:02 UTC (6+ messages)
` [PATCH 1/3] Add a common struct clk
[PATCH] OMAP1: SRAM: fix size for OMAP1611 SoCs
2010-12-08 1:02 UTC
Problem with sram size on OMAP1611 (OSK)
2010-12-08 0:56 UTC (4+ messages)
[PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode
2010-12-08 0:52 UTC (3+ messages)
CpuFreq for mini2440
2010-12-08 0:45 UTC (2+ messages)
[PATCH] ARM: GIC irq desciptor bug fix
2010-12-08 0:43 UTC (2+ messages)
[PATCH RFC] arm: Add argument to init_machine
2010-12-08 0:42 UTC
[PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods
2010-12-08 0:36 UTC (5+ messages)
` [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs
test
2010-12-08 0:29 UTC (4+ messages)
[PATCH 00/14] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part one
2010-12-08 0:16 UTC (19+ messages)
` [PATCH 01/14] OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file
` [PATCH 02/14] OMAP: powerdomain: Infrastructure to put arch specific code
` [PATCH 03/14] OMAP: powerdomain: Arch specific funcs for state control
` [PATCH 04/14] OMAP: powerdomain: Arch specific funcs for logic control
` [PATCH 05/14] OMAP: powerdomain: Arch specific funcs for mem control
` [PATCH 06/14] OMAP4: powerdomain: Add pwrdm_clear_all_prev_pwrst
` [PATCH 07/14] OMAP2+: powerdomains: move powerdomain static data to .c files
` [PATCH 08/14] OMAP2+: clockdomains: move clockdomain "
` [PATCH 09/14] OMAP3: control/PRCM: add omap3_ctrl_write_boot_mode()
` [PATCH 10/14] OMAP3: control/PRCM: move CONTROL_PADCONF_SYS_NIRQ save/restore to SCM code
` [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files
` [PATCH 12/14] OMAP4: PRCM: rename _MOD macros to _INST
` [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
` [PATCH 14/14] OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore
[RFC] add BUG_ON_MAPPABLE_NULL macro
2010-12-08 0:10 UTC (2+ messages)
[PATCH v2] OMAP2+: PM/serial: fix console semaphore acquire during suspend
2010-12-08 0:01 UTC
[PATCH for -rc] dmaengine: i.MX SDMA fixes
2010-12-07 23:50 UTC (5+ messages)
` [PATCH 1/2] dmaengine i.MX SDMA: initialize on module_init
` [PATCH 2/2] dmaengine i.MX SDMA: protect channel0
[PATCH] Added i2c support for mc13xxx-core
2010-12-07 22:52 UTC
[PATCH] OMAP2+: PM/serial: fix console semaphore acquire during suspend
2010-12-07 22:46 UTC (4+ messages)
Add i2c support for mc13xxx-core
2010-12-07 22:41 UTC
[PATCH] omap1: pm_bus: Fix compilation warning
2010-12-07 22:23 UTC (2+ messages)
[PATCH v10 1/6] davinci: EMAC support for Omapl138-Hawkboard
2010-12-07 22:14 UTC (6+ messages)
` [PATCH v10 2/6] davinci: EDMA "
` [PATCH v10 3/6] davinci: MMC/SD and USB-OHCI configuration "
` [PATCH v10 4/6] davinci: MMC/SD support "
` [PATCH v10 5/6] davinci: USB clocks "
` [PATCH v10 6/6] davinci: USB1.1 support "
[PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set
2010-12-07 21:41 UTC (5+ messages)
[PATCH 00/15] ARM: mxs: Add initial support for MX23 and MX28
2010-12-07 21:18 UTC (22+ messages)
` [PATCH 09/15] ARM: mxs: Add clock support
` [PATCH v3 01/15] ARM: mxs: Add core definitions
` [PATCH v3 03/15] ARM: mxs: Add reset routines
` [PATCH v2 04/15] ARM: mxs: Add interrupt support
` [PATCH v2 05/15] ARM: mxs: Add low-level debug UART support
` [PATCH v3 06/15] ARM: mxs: Add timer support
` [PATCH v2 07/15] ARM: mxs: Add gpio support
` [PATCH v2 08/15] ARM: mxs: Add iomux support
` [PATCH v2 09/15] ARM: mxs: Add clock support
` [PATCH v2 12/15] ARM: mxs: Dynamically allocate fec devices
` [PATCH v2 13/15] ARM: mxs: Add initial mx23evk support
` [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support
` [PATCH v3 15/15] ARM: mxs: Add build configuration for mxs
generic irq handler and stack?
2010-12-07 21:18 UTC (5+ messages)
RFC: Dynamic hwcaps
2010-12-07 21:15 UTC (12+ messages)
[PATCH] arm: plat-omap: counter_32k: Fix build error due to IS_ERR
2010-12-07 21:04 UTC (3+ messages)
OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled
2010-12-07 20:59 UTC (4+ messages)
[PATCH] ARM: Fix warning with gcc 4.5.1 in alignment fixup
2010-12-07 20:28 UTC
[PATCH (sh-2.6) 1/2] sh: add stack smashing protection support
2010-12-07 20:15 UTC (6+ messages)
` [PATCH (sh-2.6) 2/2] arm: use generic implementation of boot_init_stack_canary
[PATCH v2] mach-at91: Support for gms board added
2010-12-07 19:53 UTC (2+ messages)
[PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes
2010-12-07 19:45 UTC (6+ messages)
[PATCH v2 0/3] ARM: omap: Thumb-2 kernel compatibility fixes
2010-12-07 19:29 UTC (14+ messages)
` [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work with CONFIG_THUMB2_KERNEL
` [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL
` [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() for CONFIG_THUMB2_KERNEL
` [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL
` [PATCH v2 3/3] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
` [PATCH v2 3/3] ARM: omap4: Convert END() to ENDPROC() for correctlinkage "
[PATCH v6 1/2] ARM: mx5: dynamically allocate pwm devices
2010-12-07 19:20 UTC (2+ messages)
[PATCH 1/2] ARM: mx3/mx31_3ds: Add watchdog support
2010-12-07 19:14 UTC (2+ messages)
` [PATCH 2/2] ARM: imx/mx27_3ds: "
[PATCH] Kirkwood: Add support for 6282 based QNAP devices
2010-12-07 18:52 UTC (5+ messages)
[PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock
2010-12-07 18:50 UTC (5+ messages)
` [PATCH v2] watchdog: imx: use clk_get to acquire the watchdogclock
[RFC] Fixing CPU Hotplug for RealView Platforms
2010-12-07 17:47 UTC (3+ messages)
bad pmd
2010-12-07 17:26 UTC (4+ messages)
[PATCH] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
2010-12-07 16:57 UTC
[PATCH v7 00/12] tnetv107x ssp drivers
2010-12-07 16:46 UTC (15+ messages)
` [PATCH v7 01/12] misc: add driver for sequencer serial port
` [PATCH v7 02/12] davinci: add tnetv107x ssp platform device
` [PATCH v7 03/12] davinci: add ssp config for tnetv107x evm board
` [PATCH v7 04/12] spi: add ti-ssp spi master driver
` [PATCH v7 05/12] davinci: add spi devices on tnetv107x evm
` [PATCH v7 06/12] regulator: add driver for tps6524x regulator
` [PATCH v7 07/12] davinci: add tnetv107x evm regulators
` [PATCH v7 08/12] gpio: add ti-ssp gpio driver
` [PATCH v7 09/12] davinci: add tnetv107x evm ti-ssp gpio device
` [PATCH v7 10/12] backlight: add support for tps6116x controller
` [PATCH v7 11/12] davinci: add tnetv107x evm backlight device
` [PATCH v7 12/12] davinci: add tnetv107x evm i2c eeprom device
[PATCH v4] ARM: vexpress: add support for multiple core tiles
2010-12-07 16:18 UTC (3+ messages)
[PATCH] watchdog: imx: use clk_get to acquire the watchdog clock
2010-12-07 15:16 UTC (4+ messages)
[PATCHv2] support PMIC mc13892
2010-12-07 14:48 UTC (6+ messages)
[PATCH] mach-at91: Support for gms board added
2010-12-07 14:42 UTC (3+ messages)
Question about ARM virtualization
2010-12-07 14:37 UTC
[PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time
2010-12-07 13:31 UTC (7+ messages)
[PATCH 1/3] ARM: mx5: add support for the two watchdog modules
2010-12-07 13:08 UTC (4+ messages)
[PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
2010-12-07 11:04 UTC
[PATCH] ARM: ux500: Add debugfs support for powerdebug
2010-12-07 10:20 UTC
[PATCH] support PMIC mc13892
2010-12-07 10:09 UTC (6+ messages)
` [PATCH] Added i2c support for mc13xxx-core
[PATCH 0/5] SMP support for msm
2010-12-07 8:17 UTC (5+ messages)
` [PATCH 3/5] msm: timer: SMP timer "
[PATCH] support PMIC mc13892
2010-12-07 8:02 UTC (9+ messages)
[PATCH 19/22] ARM: CPU hotplug: move cpu_killed completion to core code
2010-12-07 7:53 UTC
[PATCH] arm: dma-mapping: move consistent_init to early_initcall
2010-12-07 6:22 UTC (5+ messages)
[PATCH] OMAP1: I2C: fix device initialization
2010-12-07 4:34 UTC (2+ messages)
[PATCH] ARM: Add Kconfig entry for SG chain support
2010-12-07 2:53 UTC (3+ messages)
[PATCH RESEND] MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
2010-12-07 2:08 UTC
[PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite
2010-12-07 2:04 UTC (5+ messages)
[PATCH] arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check
2010-12-06 23:51 UTC (2+ messages)
[PATCH] omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD
2010-12-06 23:50 UTC (3+ messages)
[PATCH 0/9] TI DMM-TILER driver
2010-12-06 23:21 UTC (6+ messages)
` [PATCH 6/9] TILER-DMM: Geometry and view manipulation functions
` [PATCH 7/9] TILER-DMM: Main TILER driver implementation
` [PATCH 8/9] TILER-DMM: Linking TILER driver into the Linux kernel build
` [PATCH 9/9] TILER-DMM: Device support for OMAP
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).