messages from 2011-01-18 01:25:42 to 2011-01-18 20:29:12 UTC [more...]
[PATCH] MTD: atmel_nand: Add DMA support to access Nandflash
2011-07-08 17:32 UTC (8+ messages)
` 答复: "
[PATCH 0/8] Basic ARM device tree support
2011-01-18 20:29 UTC (4+ messages)
` [PATCH 1/8] arm/dt: Make __vet_atags also accept a dtb image
` [PATCH 2/8] arm/dt: allow bootmem reservation for device tree blob and initrd
` [PATCH 3/8] arm/dt: Allow CONFIG_OF on ARM
[PATCH] drivers: mmc: msm: update to new arm pfn_to_dma API
2011-01-18 20:22 UTC (3+ messages)
[GIT PULL] OMAP PRCM/clocksource/clockdomain fixes for 2.6.38-rc
2011-01-18 19:47 UTC
A few questions on imx-sdma
2011-01-18 19:43 UTC (2+ messages)
[PATCH v2] Add i.MX23/28 auart support
2011-01-18 19:36 UTC (4+ messages)
State of LDP3430 platform
2011-01-18 19:36 UTC (5+ messages)
[RFC 1/2] AT91: Support SAM9260 and SAM9G20-based boards in the same kernel image
2011-01-18 19:35 UTC (9+ messages)
ALSA issue on DA850/OMAP-L138/AM18x
2011-01-18 19:16 UTC (4+ messages)
` [alsa-devel] "
[PATCH] Board support Pcontrol_G20, hardware revision 2
2011-01-18 18:56 UTC (2+ messages)
[PATCH] arm: Configure reference clock for Versatile Express timers
2011-01-18 18:28 UTC (5+ messages)
[PATCH] davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
2011-01-18 18:23 UTC (3+ messages)
[PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
2011-01-18 18:20 UTC (25+ messages)
` [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
` [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
` [PATCH 04/14] ARM: v6k: introduce CPU_V6K option
` [PATCH 09/14] ARM: v6k: select generic atomic64 code according to V6 variants
` [PATCH 10/14] ARM: v6k: select TLS register "
[PATCH] drivers: mmc: msm: remove clock disable in probe
2011-01-18 18:14 UTC
[PATCH v2] arm: Configure reference clock for Versatile Express timers
2011-01-18 18:04 UTC
[PATCH v1 0/5] davinci: da850: clean up pinmux arrays in da850.c
2011-01-18 17:21 UTC (6+ messages)
` [PATCH v1 1/5] davinci: da850: remove unused pinmux array
` [PATCH v1 2/5] davinci: da850: remove unused emif "
` [PATCH v1 3/5] davinci: da850: move da850_evm specific mcasp pins to board file
` [PATCH v1 4/5] davinci: da850: move da850_evm specific mmcsd pinmux array "
` [PATCH v1 5/5] davinci: da850: remove unused uart pinmux arrays
BUG: spinlock recursion (sys_chdir, user_path_at, do_path_lookup ...)
2011-01-18 16:59 UTC (2+ messages)
[RFC+CFT] Use word operations in bitops
2011-01-18 16:28 UTC (7+ messages)
resume regression in 2.6.37
2011-01-18 16:20 UTC (16+ messages)
` [PATCH] pxa3xx: fix PXA GPIO IRQ handling
` [PATCH] ARM: pxa: fix "
[PATCH V4 00/62] Updating SPEAr Support
2011-01-18 16:18 UTC (67+ messages)
` [PATCH V4 01/62] spear/vmalloc.h: Appending UL to VMALLOC_END
` [PATCH V4 02/62] sp810 Fix: Switch to slow mode before sysctl_soft_reset
` [PATCH V4 03/62] ST SPEAr: Padmux code Updated
` [PATCH V4 04/62] ST SPEAr: Making clock functions more generic
` [PATCH V4 05/62] ST SPEAr: Formalized timer support
` [PATCH V4 06/62] ST SPEAr13XX: Adding machine specific header files
` [PATCH V4 07/62] ST SPEAr13XX: Adding machine specific src files
` [PATCH V4 08/62] ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/
` [PATCH V4 09/62] ST SPEAr13XX: Added compilation support in arch/arm/
` [PATCH V4 10/62] ST SPEAr13xx: Adding default config file
` [PATCH V4 11/62] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx
` [PATCH V4 12/62] ST SPEAr: Updating Clock Support
` [PATCH V4 13/62] ST SPEAr: Adding Debugfs support on clock framework
` [PATCH V4 14/62] ST SPEAr: Correcting SOC Config base address for spear320
` [PATCH V4 15/62] ST SPEAr: Adding PLGPIO driver for spear platform
` [PATCH V4 17/62] ST SPEAr: Adding machine support for rtc-spear
` [PATCH V4 18/62] ST SPEAr: adding support for synopsis i2c designware
` [PATCH V4 19/62] ST SPEAr: Adding machine support for USB host
` [PATCH V4 20/62] ST SPEAr: Adding machine support for keyboard
` [PATCH V4 21/62] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size
` [PATCH V4 22/62] ST SPEAr: Adding support for ST's PWM IP
` [PATCH V4 23/62] ST SPEAr: Adding Watchdog support
` [PATCH V4 24/62] ST SPEAr: Adding machine support for nand
` [PATCH V4 25/62] ST SPEAr: Added PCIE host controller base driver support
` [PATCH V4 26/62] ST SPEAr: Adding support for SSP PL022
` [PATCH V4 27/62] ST SPEAr: Adding support for SDHCI (SDIO)
` [PATCH V4 28/62] ST SPEAr: Changing resource size of amba devices to SZ_4K
` [PATCH V4 29/62] ST SPEAr: Replacing SIZE macro's with actual required size
` [PATCH V4 30/62] SPEAr: defines base addresses as ulong
` [PATCH V4 31/62] ST SPEAr: Adding miscellaneous devices
` [PATCH V4 32/62] ST SPEAr 13xx : Adding support for SPEAr1310
` [PATCH V4 33/62] SPEAr320: Adding support for CAN
` [PATCH V4 34/62] ST SPEAr: Adding support for DDR in clock framework
` [PATCH V4 35/62] ST SPEAr : EMI (Extrenal Memory Interface) controller driver
` [PATCH V4 36/62] SPEAr Clock Framework: Adding support for PLL frequency change
` [PATCH V4 37/62] SPEAr Power Management: Added the support for Standby mode
` [PATCH V4 38/62] SPEAr CPU freq: Adding support for CPU Freq framework
` [PATCH V4 39/62] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms
` [PATCH V4 40/62] ST SPEAr: replace readl, writel with readl_relaxed, writel_relaxed in uncompress.h
` [PATCH V4 41/62] ST SPEAr13xx: add L2 cache support
` [PATCH V4 42/62] ST SPEAr13xx: Modified static mappings
` [PATCH V4 43/62] SPEAr1310: Adding Static Mapping for RAS Area
` [PATCH V4 44/62] SPEAr: Adding and Updating Clock definitions
` [PATCH V4 45/62] SPEAr : Pad multiplexing handling modified
` [PATCH V4 46/62] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation
` [PATCH V4 47/62] SPEAr : Updating pad multiplexing support
` [PATCH V4 48/62] ST SPEAr3xx: Passing pmx devices address from machine *.c files
` [PATCH V4 49/62] ST SPEAr Clock Framework: Updating for single image solution
` [PATCH V4 50/62] SPEAr3xx: Make local structures static
` [PATCH V4 51/62] SPEAR3xx: Rename register/irq defines to remove naming conflicts
` [PATCH V4 52/62] SPEAr3xx: Rework pmx_dev code to remove conflicts
` [PATCH V4 53/62] SPEAr3xx: Rework KConfig to allow all boards to be compiled in
` [PATCH V4 54/62] SPEAr3xx: Replace defconfigs with single unified defconfig
` [PATCH V4 55/62] ST SPEAr: Appending spear3** with global structures
` [PATCH V4 56/62] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy
` [PATCH V4 57/62] SPEAr6xx: Rework Kconfig for single image solution
` [PATCH V4 58/62] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig
` [PATCH V4 59/62] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine
` [PATCH V4 60/62] ST SPEAr: Adding devices & clocks
` [PATCH V4 61/62] ST SPEAr: Adding information in Documentation/ and MAINTAINERS
` [PATCH V4 62/62] ST SPEAr: Updating defconfigs
Why call calibrate_delay() in smp.c: secondary_start_kernel()
2011-01-18 15:30 UTC (8+ messages)
[PATCH 0/3] Support BE8 kernel modules relocation
2011-01-18 15:23 UTC (5+ messages)
` [PATCH 1/3] Support BE8 mode "
[PATCH] mmci: fixup broken_blockend variant patch v2
2011-01-18 15:01 UTC (8+ messages)
[PATCH V2] ST SPEAr: PCIE gadget suppport
2011-01-18 14:51 UTC (4+ messages)
[PATCH v4 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
2011-01-18 13:52 UTC (7+ messages)
` [PATCH v4 1/6] OMAP2420: hwmod data: Add McSPI
` [PATCH v4 2/6] OMAP2430: "
` [PATCH v4 3/6] OMAP3: "
` [PATCH v4 4/6] OMAP4: "
` [PATCH v4 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework
` [PATCH v4 6/6] OMAP: runtime: McSPI driver runtime conversion
[PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
2011-01-18 13:51 UTC (3+ messages)
camera on Freescale i.MX51
2011-01-18 13:33 UTC
[PATCH 0/2] Common struct clk implementation, v10
2011-01-18 12:21 UTC (9+ messages)
` [PATCH 1/2] Add a common struct clk
[PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
2011-01-18 12:05 UTC (7+ messages)
[PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
2011-01-18 12:02 UTC
[PATCH 0/5] davinci: da850: clean up pinmux arrays in da850.c
2011-01-18 11:48 UTC (3+ messages)
[PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver
2011-01-18 10:21 UTC (4+ messages)
` [PATCH v4] "
[PATCH 0/7] omap1 sparse warning fixes
2011-01-18 9:22 UTC (11+ messages)
` [PATCH 1/7] arm: plat-omap: dma: make omap_dma_in_1510_mode() static
` [PATCH 2/7] arm: mach-omap1: board-h2: make h2_nand_platdata static
` [PATCH 3/7] arm: mach-omap1: board-innovator: make innovator_mmc_init() static
` [PATCH 4/7] arm: mach-omap1: board-htcherald: make htcpld_chips and htcpld_pfdata static
` [PATCH 5/7] arm: mach-omap1: board-h3: make nand_platdata static
` [PATCH 6/7] arm: plat-omap: system.h: move voiceblue definitions into the board header
` [PATCH 7/7] arm: mach-omap1: board-voiceblue: add missing include
[PATCHv3 0/2] omap3: Devkit8000: misc fixes
2011-01-18 9:02 UTC (4+ messages)
` [PATCHv3 1/2] OMAP3: Devkit8000: Change lcd power pin
` [PATCHv3 2/2] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
[PATCH 0/5] mmc: add double buffering for mmc block requests
2011-01-18 8:12 UTC (3+ messages)
[patch 1/1] t5325: add audio support
2011-01-18 7:27 UTC
[GIT PULL] Samsung S5P fixes
2011-01-18 7:09 UTC
[PATCH] MTD: atmel_nand: Add DMA support to access Nandflash
2011-01-18 6:36 UTC
[PATCH v4] MTD: atmel_nand: Add DMA support to access Nandflash
2011-01-18 6:36 UTC
[PATCH v3 4/6] OMAP4: hwmod data: Add McSPI
2011-01-18 6:30 UTC (3+ messages)
[PATCH 1/2] video: nuc900fb: fix compile error
2011-01-18 4:36 UTC (3+ messages)
` [PATCH 2/2] video: nuc900fb: properly free resources in nuc900fb_remove
[PATCH] MTD: atmel_nand: Add DMA support to access Nandflash
2011-01-18 3:02 UTC
[PATCH v3] MTD: atmel_nand: Add DMA support to access Nandflash
2011-01-18 3:02 UTC
[PATCH v3] MTD: atmel_nand: Add DMA support to access Nandflash
2011-01-18 2:56 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).