* [PATCH v2 03/13] ARM: dts: armada-375: Fixup mdio DT warning
From: Gregory CLEMENT @ 2016-11-13 21:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113213234.3368-1-gregory.clement@free-electrons.com>
MDIO has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-375.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index e016ff3ed970..97b663d83fb6 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -203,7 +203,7 @@
<0xc100 0x100>;
};
- mdio: mdio {
+ mdio: mdio at c0054 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
--
2.10.2
^ permalink raw reply related
* [PATCH v2 02/13] ARM: dts: armada-375: Use the node labels
From: Gregory CLEMENT @ 2016-11-13 21:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113213234.3368-1-gregory.clement@free-electrons.com>
Use the node label when possible. As a result it flattens the device tree
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-375-db.dts | 269 ++++++++++++++++++------------------
1 file changed, 136 insertions(+), 133 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index cded5f0a262d..b33a674088ed 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -69,138 +69,141 @@
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
- internal-regs {
- spi at 10600 {
- pinctrl-0 = <&spi0_pins>;
- pinctrl-names = "default";
- /*
- * SPI conflicts with NAND, so we disable it
- * here, and select NAND as the enabled device
- * by default.
- */
- status = "disabled";
-
- spi-flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
- };
- };
-
- i2c at 11000 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- };
-
- i2c at 11100 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- pinctrl {
- sdio_st_pins: sdio-st-pins {
- marvell,pins = "mpp44", "mpp45";
- marvell,function = "gpio";
- };
- };
-
- sata at a0000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- nand: nand at d0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition at 0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition at 800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition at 1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
-
- usb at 54000 {
- status = "okay";
- };
-
- usb3 at 58000 {
- status = "okay";
- };
-
- mvsdio at d4000 {
- pinctrl-0 = <&sdio_pins &sdio_st_pins>;
- pinctrl-names = "default";
- status = "okay";
- cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
-
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy3: ethernet-phy at 3 {
- reg = <3>;
- };
- };
-
- ethernet at f0000 {
- status = "okay";
-
- eth0 at c4000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-
- eth1 at c5000 {
- status = "okay";
- phy = <&phy3>;
- phy-mode = "gmii";
- };
- };
- };
-
- pcie-controller {
- status = "okay";
- /*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
};
};
+&pciec {
+ status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+};
+
+&pcie1 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+};
+
+
+&spi0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * SPI conflicts with NAND, so we disable it here, and
+ * select NAND as the enabled device by default.
+ */
+
+ status = "disabled";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&pinctrl {
+ sdio_st_pins: sdio-st-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition at 800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition at 1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&sdio {
+ pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ };
+};
+
+ðernet {
+ status = "okay";
+};
+
+
+ð0 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+ð1 {
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v2 01/13] ARM: dts: armada-375: Add node labels
From: Gregory CLEMENT @ 2016-11-13 21:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113213234.3368-1-gregory.clement@free-electrons.com>
As it was previously done for kirkwood and for aramda 370/XP, this adds
missing node labels to Armada 375 and SoC specific nodes to allow to
reference them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-375.dtsi | 62 +++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 45fa92f9cf5c..e016ff3ed970 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -84,12 +84,12 @@
#size-cells = <0>;
enable-method = "marvell,armada-375-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -115,7 +115,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +135,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +145,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +155,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +182,12 @@
prefetch-data = <1>;
};
- scu at c000 {
+ scu: scu at c000 {
compatible = "arm,cortex-a9-scu";
reg = <0xc000 0x58>;
};
- timer at c600 {
+ timer0: timer at c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +203,7 @@
<0xc100 0x100>;
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
@@ -212,7 +212,7 @@
};
/* Network controller */
- ethernet at f0000 {
+ ethernet: ethernet at f0000 {
compatible = "marvell,armada-375-pp2";
reg = <0xf0000 0xa000>, /* Packet Processor regs */
<0xc0000 0x3060>, /* LMS regs */
@@ -235,7 +235,7 @@
};
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +307,7 @@
status = "disabled";
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "marvell,mv88f6720-pinctrl";
reg = <0x18000 0x24>;
@@ -382,7 +382,7 @@
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-375-system-controller";
reg = <0x18200 0x100>;
};
@@ -415,7 +415,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer at 20300 {
+ timer1: timer at 20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +428,24 @@
clock-names = "nbclk", "fixed";
};
- watchdog at 20300 {
+ watchdog: watchdog at 20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst at 20800 {
+ cpurst: cpurst at 20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
- coherency-fabric at 21010 {
+ coherencyfab: coherency-fabric at 21010 {
compatible = "marvell,armada-375-coherency-fabric";
reg = <0x21010 0x1c>;
};
- usb at 50000 {
+ usb0: usb at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@
status = "disabled";
};
- usb at 54000 {
+ usb1: usb at 54000 {
compatible = "marvell,orion-ehci";
reg = <0x54000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +463,7 @@
status = "disabled";
};
- usb3 at 58000 {
+ usb2: usb3 at 58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +473,7 @@
status = "disabled";
};
- xor at 60800 {
+ xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -493,7 +493,7 @@
};
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -513,7 +513,7 @@
};
};
- crypto at 90000 {
+ cesa: crypto at 90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -528,7 +528,7 @@
marvell,crypto-sram-size = <0x800>;
};
- sata at a0000 {
+ sata: sata at a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +537,7 @@
status = "disabled";
};
- nand at d0000 {
+ nand: nand at d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -547,7 +547,7 @@
status = "disabled";
};
- mvsdio at d4000 {
+ sdio: mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +559,7 @@
status = "disabled";
};
- thermal at e8078 {
+ thermal: thermal at e8078 {
compatible = "marvell,armada375-thermal";
reg = <0xe8078 0x4>, <0xe807c 0x8>;
status = "okay";
@@ -580,7 +580,7 @@
};
};
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -599,7 +599,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -616,7 +616,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie1: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 00/13] Various Armada 375 DT warning fixup
From: Gregory CLEMENT @ 2016-11-13 21:32 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
In the second version as for the Armada 370/XP series the main change
is the use of the target and attributes property of the memory windows
when MBUS_ID is involved. Indeed, by adding this information to the
unit-address is really uniq as required by the ePAPR as explained in
this email:
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/466941.html.
The other change is the merged of the patch 7 and 8 of the first version.
Gregory
Gregory CLEMENT (13):
ARM: dts: armada-375: Add node labels
ARM: dts: armada-375: Use the node labels
ARM: dts: armada-375: Fixup mdio DT warning
ARM: dts: armada-375: Fixup bootrom DT warning
ARM: dts: armada-375: Fixup devbus DT warning
ARM: dts: armada-375: Fixup sa-ram DT warning
ARM: dts: armada-375: Fixup pcie DT warnings
ARM: dts: armada-375: Fixup pinctrl DT warnings
ARM: dts: armada-375: Fixup soc DT warning
ARM: dts: armada-375: Fixup internal-regs DT warning
ARM: dts: armada-375: Remove skeleton.dtsi
ARM: dts: armada-375: Fixup memory DT warning
ARM: dts: armada-375: Fixup ethernet child DT warning
arch/arm/boot/dts/armada-375-db.dts | 273 ++++++++++++++++++------------------
arch/arm/boot/dts/armada-375.dtsi | 80 +++++------
2 files changed, 179 insertions(+), 174 deletions(-)
--
2.10.2
^ permalink raw reply
* [PATCH v2 19/19] ARM: dts: armada-370-xp: Fixup regulator DT warning
From: Gregory CLEMENT @ 2016-11-13 21:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
regulator has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 4 ++--
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 20ea2391da6e..9eb755534e70 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -186,7 +186,7 @@
pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
pinctrl-names = "default";
- sata1_regulator: sata1-regulator {
+ sata1_regulator: sata1-regulator at 1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA1 Power";
@@ -199,7 +199,7 @@
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
- sata2_regulator: sata2-regulator {
+ sata2_regulator: sata2-regulator at 2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA2 Power";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 45480d992e1e..ee3acb88ea8a 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -154,7 +154,7 @@
&sata3_pwr_pin &sata4_pwr_pin>;
pinctrl-names = "default";
- sata1_regulator: sata1-regulator {
+ sata1_regulator: sata1-regulator at 1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA1 Power";
@@ -167,7 +167,7 @@
gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- sata2_regulator: sata2-regulator {
+ sata2_regulator: sata2-regulator at 2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA2 Power";
@@ -180,7 +180,7 @@
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
- sata3_regulator: sata3-regulator {
+ sata3_regulator: sata3-regulator at 3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "SATA3 Power";
@@ -193,7 +193,7 @@
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
- sata4_regulator: sata4-regulator {
+ sata4_regulator: sata4-regulator at 4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "SATA4 Power";
--
2.10.2
^ permalink raw reply related
* [PATCH v2 18/19] ARM: dts: armada-370-xp: Remove button address and fixup names
From: Gregory CLEMENT @ 2016-11-13 21:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
The gpio-key nodes do not have a reg property, so remove the address from
the unit name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-rd.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 6 +++---
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 6 +++---
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++--
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
6 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 3247e456a219..1128e86c3861 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -122,7 +122,7 @@
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- button at 1 {
+ button {
label = "Software Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index ea10b6328f37..856dae2ffa23 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -141,19 +141,19 @@
#address-cells = <1>;
#size-cells = <0>;
- button at 1 {
+ power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button at 2 {
+ backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button at 3 {
+ reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 413b5c7ec68d..3a80a2b50e90 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -89,19 +89,19 @@
#address-cells = <1>;
#size-cells = <0>;
- button at 1 {
+ power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- button at 2 {
+ reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button at 3 {
+ button {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 1481463ca27f..51bb1d379217 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -113,7 +113,7 @@
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- button at 1 {
+ reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 2eb0cc58cf50..d63a8510c5ce 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -267,13 +267,13 @@
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- button at 1 {
+ wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- button at 2 {
+ reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e269560c5df2..b637cd5a8cf9 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -111,7 +111,7 @@
#address-cells = <1>;
#size-cells = <0>;
- button at 1 {
+ init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 17/19] ARM: dts: armada-370-xp: Remove address from dsa unit name
From: Gregory CLEMENT @ 2016-11-13 21:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
The dsa node does not have a reg property, so remove the address from the
unit name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-rd.dts | 2 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 66974ab4d334..3247e456a219 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -172,7 +172,7 @@
};
};
- dsa at 0 {
+ dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index c5ca7525389b..2eb0cc58cf50 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -301,7 +301,7 @@
4500 1>;
};
- dsa at 0 {
+ dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 16/19] ARM: dts: armada-370-xp: Fixup memory DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
memory has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 2 +-
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 2 +-
arch/arm/boot/dts/armada-370-mirabox.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
arch/arm/boot/dts/armada-xp-db.dts | 2 +-
arch/arm/boot/dts/armada-xp-gp.dts | 2 +-
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
arch/arm/boot/dts/armada-xp-matrix.dts | 2 +-
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +-
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 2 +-
18 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 65f348113c58..c6110ea33cbf 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -67,7 +67,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index b8339f3c43eb..69ddfdbf02e2 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -62,7 +62,7 @@
stdout-path = &uart0;
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MiB */
};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index b64e02aa88ea..e903b3cf1204 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 791264b44d98..b417f2f12faa 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 19e16c650f1a..96290282a888 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 80ee06f542c2..66974ab4d334 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -67,7 +67,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index c1bea2ef8eca..ea10b6328f37 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -23,7 +23,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 779cffdaa561..413b5c7ec68d 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -24,7 +24,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 00b14b6a3884..20ea2391da6e 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -70,7 +70,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index ba59b373ff2c..1481463ca27f 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -62,7 +62,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 99eb8a022599..ecd3455e909c 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -67,7 +67,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 31b218b5c975..c52fc5b56ee6 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -68,7 +68,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
/*
* 8 GB of plug-in RAM modules by default.The amount
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 1debbb2e12a8..fd1a9e68e320 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -57,7 +57,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512MB */
};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 10c80c824311..c5ca7525389b 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -62,7 +62,7 @@
stdout-path = &uart0;
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 9bcc0d03f49d..c9bca2eea613 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -55,7 +55,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
/*
* This board has 4 GB of RAM, but the last 256 MB of
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index df78911e63b6..8a6c7d6408b2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x80000000>; /* 2GB */
};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 4cfce329ad47..e269560c5df2 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -57,7 +57,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 0c8491cfeb7d..45480d992e1e 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -70,7 +70,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x40000000>; /* 1GB */
};
--
2.10.2
^ permalink raw reply related
* [PATCH v2 15/19] ARM: dts: armada-370-xp: Fixup soc DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
soc has a ranges property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 2 +-
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 2 +-
arch/arm/boot/dts/armada-370-mirabox.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 2 +-
arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
arch/arm/boot/dts/armada-xp-db.dts | 2 +-
arch/arm/boot/dts/armada-xp-gp.dts | 2 +-
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
arch/arm/boot/dts/armada-xp-matrix.dts | 2 +-
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +-
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
27 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 6ab09c846211..65f348113c58 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -72,7 +72,7 @@
reg = <0x00000000 0x40000000>; /* 1 GB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index ee114f920494..b8339f3c43eb 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -67,7 +67,7 @@
reg = <0x00000000 0x20000000>; /* 512 MiB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 3ee6228c1dd6..b64e02aa88ea 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -59,7 +59,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 6b2437fa8e84..791264b44d98 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -61,7 +61,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 2ed97b8ae686..19e16c650f1a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -61,7 +61,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f2535794d35b..80ee06f542c2 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -72,7 +72,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index 61a3576ca090..2e98772d1ee3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -27,7 +27,7 @@
model = "Seagate NAS 4-Bay (Dart, SRPD40)";
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
- soc {
+ soc at f0_01_0 {
internal-regs at f0_01_0 {
ethernet at 74000 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 64a1ccfda42b..c1bea2ef8eca 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -28,7 +28,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
index 0ba79c0cf379..e469c55a4c13 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -26,7 +26,7 @@
model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
- soc {
+ soc at f0_01_0 {
internal-regs at f0_01_0 {
sata at a0000 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
index 1766f74ffa7d..0763debbed75 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -26,7 +26,7 @@
model = "Seagate Personal Cloud (Cumulus, SRN21C)";
compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
- soc {
+ soc at f0_01_0 {
internal-regs at f0_01_0 {
sata at a0000 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 0b25f1dac938..779cffdaa561 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -29,7 +29,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index f4b6f5fca85c..00b14b6a3884 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -75,7 +75,7 @@
reg = <0x00000000 0x20000000>; /* 512 MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 5505b14c2ac4..ef4f26a8e712 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -76,7 +76,7 @@
interrupts-extended = <&mpic 3>;
};
- soc {
+ soc at f0_01_0 {
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 9b73bd924424..e5d543692469 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -64,7 +64,7 @@
gpio2 = &gpio2;
};
- soc {
+ soc at f0_01_0 {
compatible = "marvell,armada370-mbus", "simple-bus";
bootrom at 01_e0_0 {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 9c569796301b..ba59b373ff2c 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -67,7 +67,7 @@
reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 3dd6756e86af..99eb8a022599 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -72,7 +72,7 @@
reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index a5469e23dd85..31b218b5c975 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -91,7 +91,7 @@
};
};
- soc {
+ soc@f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index a1343f9cbb0e..1debbb2e12a8 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -62,7 +62,7 @@
reg = <0 0x00000000 0 0x20000000>; /* 512MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 738e5d5b9d1a..10c80c824311 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -67,7 +67,7 @@
reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 7a5c9d1a2caa..9bcc0d03f49d 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -65,7 +65,7 @@
reg = <0 0x00000000 0 0xf0000000>;
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 64a80419e284..f93593c1111e 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -80,7 +80,7 @@
};
};
- soc {
+ soc at f0_01_0 {
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index acdd9152c232..a3f4f7213711 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -81,7 +81,7 @@
};
};
- soc {
+ soc at f0_01_0 {
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 53982474344f..3b6c87bc19b1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -98,7 +98,7 @@
};
};
- soc {
+ soc@f0_01_0 {
/*
* MV78460 has 4 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. Two units are
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index e6e009dda98f..df78911e63b6 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -61,7 +61,7 @@
reg = <0 0x00000000 0 0x80000000>; /* 2GB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 308e2547d46e..4cfce329ad47 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -62,7 +62,7 @@
reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index fb553d462b5a..0c8491cfeb7d 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -75,7 +75,7 @@
reg = <0 0x00000000 0 0x40000000>; /* 1GB */
};
- soc {
+ soc at f0_01_0 {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 96adc87fdeba..333b743f8fe7 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -64,7 +64,7 @@
serial3 = &uart3;
};
- soc {
+ soc at f0_01_0 {
compatible = "marvell,armadaxp-mbus", "simple-bus";
bootrom@01_1d_0 {
--
2.10.2
^ permalink raw reply related
* [PATCH v2 14/19] ARM: dts: armada-370-xp: Fixup internal-regs DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
internal-regs has a ranges property so the unit name should contain an
address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 2 +-
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 2 +-
arch/arm/boot/dts/armada-370-mirabox.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +-
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts | 2 +-
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 2 +-
arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
arch/arm/boot/dts/armada-xp-db.dts | 2 +-
arch/arm/boot/dts/armada-xp-gp.dts | 2 +-
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
arch/arm/boot/dts/armada-xp-matrix.dts | 2 +-
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +-
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
27 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index f3adc187c6a5..6ab09c846211 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -77,7 +77,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index 9e499eeede4b..ee114f920494 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -72,7 +72,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
sata at a0000 {
nr-ports = <2>;
status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index c4dded0cd0c1..3ee6228c1dd6 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -64,7 +64,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 99b9d73ebbaf..6b2437fa8e84 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -66,7 +66,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc at 10300 {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index b5dd30178725..2ed97b8ae686 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -66,7 +66,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc at 10300 {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 29722b9f288e..f2535794d35b 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -77,7 +77,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index eb6af53b4954..61a3576ca090 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -28,7 +28,7 @@
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
soc {
- internal-regs {
+ internal-regs at f0_01_0 {
ethernet at 74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 9b582c47f10c..64a1ccfda42b 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -32,7 +32,7 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
index 3c91f9821c89..0ba79c0cf379 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -27,7 +27,7 @@
compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
soc {
- internal-regs {
+ internal-regs at f0_01_0 {
sata at a0000 {
status = "okay";
nr-ports = <2>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
index aad39e97af43..1766f74ffa7d 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -27,7 +27,7 @@
compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
soc {
- internal-regs {
+ internal-regs at f0_01_0 {
sata at a0000 {
status = "okay";
nr-ports = <1>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index bb678a45ac8e..0b25f1dac938 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -33,7 +33,7 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
- internal-regs {
+ internal-regs at f0_01_0 {
coherency-fabric at 20200 {
broken-idle;
};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index a696bbf0f703..f4b6f5fca85c 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -80,7 +80,7 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* RTC provided by Seiko S-35390A I2C RTC chip below */
rtc at 10300 {
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 728b7aa5e6fd..5505b14c2ac4 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -134,7 +134,7 @@
status = "disabled";
};
- internal-regs {
+ internal-regs at f0_01_0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index f7f7194c30c8..9b73bd924424 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -126,7 +126,7 @@
};
};
- internal-regs {
+ internal-regs at f0_01_0 {
L2: l2-cache at 8000 {
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index d12b06bf0d60..9c569796301b 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -73,7 +73,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* UART0 */
serial at 12000 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 607ce1f2ddd6..3dd6756e86af 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -80,7 +80,7 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 015b8ab722a5..a5469e23dd85 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -99,7 +99,7 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 1dce74d9b616..a1343f9cbb0e 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -68,7 +68,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 488a047481d4..738e5d5b9d1a 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -73,7 +73,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
rtc at 10300 {
/* No crystal connected to the internal RTC */
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 8b5a4e79d26b..7a5c9d1a2caa 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -71,7 +71,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
serial at 12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 05c164b5786d..64a80419e284 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -200,7 +200,7 @@
};
};
- internal-regs {
+ internal-regs at f0_01_0 {
gpio0: gpio at 18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 07894b0d3e59..acdd9152c232 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -283,7 +283,7 @@
};
};
- internal-regs {
+ internal-regs at f0_01_0 {
gpio0: gpio at 18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 775bee53ce86..53982474344f 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -321,7 +321,7 @@
};
};
- internal-regs {
+ internal-regs at f0_01_0 {
gpio0: gpio at 18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 5aaaf0fb2330..e6e009dda98f 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -67,7 +67,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
rtc at 10300 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e40f3314b699..308e2547d46e 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -70,7 +70,7 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
- internal-regs {
+ internal-regs at f0_01_0 {
rtc at 10300 {
/* No crystal connected to the internal RTC */
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index d5630a7b4b18..fb553d462b5a 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -81,7 +81,7 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- internal-regs {
+ internal-regs at f0_01_0 {
/* RTC is provided by Seiko S-35390A below */
rtc at 10300 {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index d67fafac495d..96adc87fdeba 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -72,7 +72,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- internal-regs {
+ internal-regs at f0_01_0 {
sdramc at 1400 {
compatible = "marvell,armada-xp-sdram-controller";
reg = <0x1400 0x500>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 13/19] ARM: dts: armada-370-xp: Fixup l2-cache DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
l2-cache which is either an aurora-outer-cache or an aurora-system-cache
has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 33d29d344caa..f7f7194c30c8 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -127,7 +127,7 @@
};
internal-regs {
- L2: l2-cache {
+ L2: l2-cache at 8000 {
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 736a0b94da2b..d67fafac495d 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -78,7 +78,7 @@
reg = <0x1400 0x500>;
};
- L2: l2-cache {
+ L2: l2-cache at 8000 {
compatible = "marvell,aurora-system-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 12/19] ARM: dts: armada-370-xp: Remove skeleton.dtsi
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 2 --
arch/arm/boot/dts/armada-370.dtsi | 4 +++-
arch/arm/boot/dts/armada-xp.dtsi | 3 +++
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index c83c52d80b5b..728b7aa5e6fd 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -50,8 +50,6 @@
* 370 and Armada XP SoC.
*/
-/include/ "skeleton64.dtsi"
-
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 6b22c6d255c1..33d29d344caa 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -50,9 +50,11 @@
*/
#include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
model = "Marvell Armada 370 family SoC";
compatible = "marvell,armada370", "marvell,armada-370-xp";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 611fbcb02ebb..736a0b94da2b 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -53,6 +53,9 @@
#include "armada-370-xp.dtsi"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
model = "Marvell Armada XP family SoC";
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
--
2.10.2
^ permalink raw reply related
* [PATCH v2 11/19] ARM: dts: armada-370: Fixup pcie DT warnings
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
PCIe has a ranges property, so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 37 +++++++++++-----------
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 28 ++++++++--------
arch/arm/boot/dts/armada-370-mirabox.dts | 32 +++++++++----------
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 32 +++++++++----------
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 32 +++++++++----------
arch/arm/boot/dts/armada-370-rd.dts | 32 +++++++++----------
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 14 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 19 +++++------
.../dts/armada-370-seagate-personal-cloud.dtsi | 18 +++++------
arch/arm/boot/dts/armada-370.dtsi | 2 +-
10 files changed, 124 insertions(+), 122 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index d26115085ea1..f3adc187c6a5 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -170,24 +170,6 @@
};
};
};
-
- pcie-controller {
- status = "okay";
- /*
- * The two PCIe units are accessible through
- * both standard PCIe slots and mini-PCIe
- * slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
};
sound {
@@ -248,6 +230,25 @@
compatible = "linux,spdif-dir";
};
};
+
+&pciec {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * both standard PCIe slots and mini-PCIe
+ * slots on the board.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index e2a363b1dd8a..9e499eeede4b 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -72,20 +72,6 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
sata at a0000 {
nr-ports = <2>;
@@ -262,6 +248,20 @@
};
};
+&pciec {
+ status = "okay";
+
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&pinctrl {
sata_l_white_pin: sata-l-white-pin {
marvell,pins = "mpp57";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 3e1ef56b6319..c4dded0cd0c1 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -64,22 +64,6 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Internal mini-PCIe connector */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected on the PCB to a USB 3.0 XHCI controller */
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -186,6 +170,22 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected on the PCB to a USB 3.0 XHCI controller */
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index a6409853db6d..99b9d73ebbaf 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -66,22 +66,6 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Connected to Marvell 88SE9170 SATA controller */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected to FL1009 USB 3.0 controller */
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -252,6 +236,22 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Connected to Marvell 88SE9170 SATA controller */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to FL1009 USB 3.0 controller */
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index fd5f1d9a434a..b5dd30178725 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -66,22 +66,6 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Connected to FL1009 USB 3.0 controller */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected to Marvell 88SE9215 SATA controller */
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -270,6 +254,22 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Connected to FL1009 USB 3.0 controller */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to Marvell 88SE9215 SATA controller */
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 621add7e12d5..29722b9f288e 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -77,22 +77,6 @@
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Internal mini-PCIe connector */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Internal mini-PCIe connector */
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -229,6 +213,22 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Internal mini-PCIe connector */
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index 82ce5ec6467b..eb6af53b4954 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -28,13 +28,6 @@
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
soc {
- pcie-controller {
- /* SATA AHCI controller 88SE9170 */
- pcie at 1,0 {
- status = "okay";
- };
- };
-
internal-regs {
ethernet at 74000 {
status = "okay";
@@ -126,6 +119,13 @@
};
};
+&pciec {
+ /* SATA AHCI controller 88SE9170 */
+ pcie at 1,0 {
+ status = "okay";
+ };
+};
+
&mdio {
phy1: ethernet-phy at 1 {
reg = <1>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 724a47908e3f..9b582c47f10c 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -32,15 +32,6 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /* USB 3.0 bridge ASM1042A */
- pcie at 2,0 {
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -199,6 +190,16 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* USB 3.0 bridge ASM1042A */
+ pcie at 2,0 {
+ status = "okay";
+ };
+};
+
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index fb52a34f0a35..bb678a45ac8e 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -33,15 +33,6 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /* USB 3.0 Bridge ASM1042A */
- pcie at 1,0 {
- status = "okay";
- };
- };
-
internal-regs {
coherency-fabric at 20200 {
broken-idle;
@@ -134,6 +125,15 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* USB 3.0 Bridge ASM1042A */
+ pcie at 1,0 {
+ status = "okay";
+ };
+};
+
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 26779b0ba79e..6b22c6d255c1 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -70,7 +70,7 @@
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
--
2.10.2
^ permalink raw reply related
* [PATCH v2 10/19] ARM: dts: armada-xp: Fixup pcie DT warnings
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
PCIe has a range property, so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 44 ++++++++--------
arch/arm/boot/dts/armada-xp-db.dts | 66 ++++++++++++------------
arch/arm/boot/dts/armada-xp-gp.dts | 42 +++++++--------
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 31 ++++++-----
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 44 ++++++++--------
arch/arm/boot/dts/armada-xp-matrix.dts | 18 +++----
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 44 ++++++++--------
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +++----
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 45 ++++++++--------
12 files changed, 179 insertions(+), 179 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 7038c8625ac5..d12b06bf0d60 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -73,28 +73,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* First mini-PCIe port */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Second mini-PCIe port */
- pcie at 2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Renesas uPD720202 USB 3.0 controller */
- pcie at 3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- };
-
internal-regs {
/* UART0 */
serial at 12000 {
@@ -153,6 +131,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* First mini-PCIe port */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie at 2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Renesas uPD720202 USB 3.0 controller */
+ pcie at 3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+};
+
&pinctrl {
pinctrl-0 = <&phy_int_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 486caf887da4..607ce1f2ddd6 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -80,39 +80,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /*
- * All 6 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie at 2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
- pcie at 3,0 {
- /* Port 0, Lane 2 */
- status = "okay";
- };
- pcie at 4,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- pcie at 9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie at 10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -244,6 +211,39 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * All 6 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie at 2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+ pcie at 3,0 {
+ /* Port 0, Lane 2 */
+ status = "okay";
+ };
+ pcie at 4,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ pcie at 9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie at 10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+};
+
&bm_bppi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 65d960defff3..015b8ab722a5 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -99,27 +99,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /*
- * The 3 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie at 9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie at 10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -229,6 +208,27 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * The 3 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie at 9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie at 10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+};
+
&bm_bppi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 0a6a43692620..1dce74d9b616 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -68,22 +68,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Quad port sata: Marvell 88SX7042 */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* USB 3.0 xHCI controller: NEC D720200F1 */
- pcie at 5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -285,6 +269,21 @@
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
+&pciec {
+ status = "okay";
+
+ /* Quad port sata: Marvell 88SX7042 */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* USB 3.0 xHCI controller: NEC D720200F1 */
+ pcie at 5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
&mdio {
phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 076f27f22c3b..488a047481d4 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -73,28 +73,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Etron EJ168 USB 3.0 controller */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* First mini-PCIe port */
- pcie at 2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Second mini-PCIe port */
- pcie at 3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- };
-
internal-regs {
rtc at 10300 {
@@ -369,6 +347,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Etron EJ168 USB 3.0 controller */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* First mini-PCIe port */
+ pcie at 2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie at 3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+};
+
&pinctrl {
keys_pin: keys-pin {
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index e1509f4c5114..8b5a4e79d26b 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -71,15 +71,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
@@ -114,3 +105,12 @@
};
};
};
+
+&pciec {
+ status = "okay";
+
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index ebf79d6de1a1..05c164b5786d 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 34e78a568460..07894b0d3e59 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 5148827ed934..775bee53ce86 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index c4685cb86f06..5aaaf0fb2330 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -67,28 +67,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Connected to first Marvell 88SE9170 SATA controller */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected to second Marvell 88SE9170 SATA controller */
- pcie at 2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Connected to Fresco Logic FL1009 USB 3.0 controller */
- pcie at 5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -290,6 +268,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Connected to first Marvell 88SE9170 SATA controller */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to second Marvell 88SE9170 SATA controller */
+ pcie at 2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Connected to Fresco Logic FL1009 USB 3.0 controller */
+ pcie at 5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 7cd2d74e0161..e40f3314b699 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -70,15 +70,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
- pcie-controller {
- status = "okay";
- /* Internal mini-PCIe connector */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
rtc at 10300 {
/* No crystal connected to the internal RTC */
@@ -222,6 +213,15 @@
status = "okay";
};
+&pciec {
+ status = "okay";
+ /* Internal mini-PCIe connector */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 189ec7f4667c..d5630a7b4b18 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -81,28 +81,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /*
- * Connected to Marvell 88SX7042 SATA-II controller
- * handling the four disks.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /*
- * Connected to EtronTech EJ168A XHCI controller
- * providing the two rear USB 3.0 ports.
- */
- pcie at 5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Seiko S-35390A below */
@@ -230,6 +208,29 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie at 5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
+
&mdio {
phy0: ethernet-phy at 0 { /* Marvell 88E1512 */
reg = <0>;
--
2.10.2
^ permalink raw reply related
* [PATCH v3] crypto: arm64/sha2: integrate OpenSSL implementations of SHA256/SHA512
From: Andy Polyakov @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAKv+Gu8ouGT31ZqtiX5dFk-QnezjdNHOnP9ErbTDg70tVUU+YA@mail.gmail.com>
>>> (+ Andy)
>>>
>>> ...
>>>>
>>>> Looking at the generated code, I see references to __ARMEB__ and
>>> __ILP32__.
>>>> The former is probably a bug,
>>
>> Oh! You mean that it should be __AARCH64EB__/__AARCH64EL__!
>
> Indeed:
>
> $ aarch64-linux-gnu-gcc -dM -E - <<<"" |grep AARCH
> #define __AARCH64_CMODEL_SMALL__ 1
> #define __AARCH64EL__ 1
>
> $ aarch64-linux-gnu-gcc -dM -E -mbig-endian - <<<"" |grep AARCH
> #define __AARCH64_CMODEL_SMALL__ 1
> #define __AARCH64EB__ 1
As it turns out it wasn't really an overlook, at least not in OpenSSL
context, as I force __ARMEB__/__ARMEL__ in 64-bit build through
arm_arch.h, which in turn is shared between 32- and 64-bit builds. But
shared code should be preferred to be self-sufficient. It doesn't mean
that it won't be fixed, only that it wasn't really a bug in OpenSSL context.
^ permalink raw reply
* [PATCH v2 09/19] ARM: dts: armada-370-xp: Fixup sa-ram DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
sa-ram which is a mmio-sram has a reg property so the unit name should
contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 7598fb013355..26779b0ba79e 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -262,7 +262,7 @@
};
};
- crypto_sram: sa-sram {
+ crypto_sram: sa-sram at 09_01_0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
reg-names = "sram";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index e4aa0018047c..611fbcb02ebb 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -230,7 +230,7 @@
};
};
- crypto_sram0: sa-sram0 {
+ crypto_sram0: sa-sram at 09_09_0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
clocks = <&gateclk 23>;
@@ -239,7 +239,7 @@
ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
};
- crypto_sram1: sa-sram1 {
+ crypto_sram1: sa-sram at 09_05_0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
clocks = <&gateclk 23>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 08/19] ARM: dts: armada-370-xp: Fixup bm-bppi DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
bm-bppi has a reg property so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp-db.dts | 8 ++++----
arch/arm/boot/dts/armada-xp-gp.dts | 8 ++++----
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 8 ++++----
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
4 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 9e3bb3d7b4dc..486caf887da4 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -213,10 +213,6 @@
};
};
};
-
- bm-bppi {
- status = "okay";
- };
};
};
@@ -248,6 +244,10 @@
};
};
+&bm_bppi {
+ status = "okay";
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 9918c7883a36..65d960defff3 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -198,10 +198,6 @@
nand-on-flash-bbt;
};
};
-
- bm-bppi {
- status = "okay";
- };
};
};
@@ -233,6 +229,10 @@
};
};
+&bm_bppi {
+ status = "okay";
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <16>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index c8dd5a3bccb6..7cd2d74e0161 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -187,10 +187,6 @@
status = "okay";
};
};
-
- bm-bppi {
- status = "okay";
- };
};
};
@@ -222,6 +218,10 @@
};
};
+&bm_bppi {
+ status = "okay";
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 5e596b64f48e..e4aa0018047c 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -248,7 +248,7 @@
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
- bm_bppi: bm-bppi {
+ bm_bppi: bm-bppi at 0c_04_0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 07/19] ARM: dts: armada-370-xp: Fixup devbus DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
devbus has a reg property so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 10 ++---
arch/arm/boot/dts/armada-xp-db.dts | 56 ++++++++++++------------
arch/arm/boot/dts/armada-xp-gp.dts | 56 ++++++++++++------------
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 56 ++++++++++++------------
4 files changed, 89 insertions(+), 89 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index a4f9684def1c..c83c52d80b5b 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -86,7 +86,7 @@
pcie-mem-aperture = <0xf8000000 0x7e00000>;
pcie-io-aperture = <0xffe00000 0x100000>;
- devbus_bootcs: devbus-bootcs {
+ devbus_bootcs: devbus-bootcs at f0_01_10400 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +96,7 @@
status = "disabled";
};
- devbus_cs0: devbus-cs0 {
+ devbus_cs0: devbus-cs at f0_01_10408 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +106,7 @@
status = "disabled";
};
- devbus_cs1: devbus-cs1 {
+ devbus_cs1: devbus-cs at f0_01_10410 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +116,7 @@
status = "disabled";
};
- devbus_cs2: devbus-cs2 {
+ devbus_cs2: devbus-cs at f0_01_10448 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +126,7 @@
status = "disabled";
};
- devbus_cs3: devbus-cs3 {
+ devbus_cs3: devbus-cs at f0_01_10420 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 665c81ff98db..9e3bb3d7b4dc 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -80,34 +80,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- devbus-bootcs {
- status = "okay";
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <16>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 16 MiB */
- nor at 0 {
- compatible = "cfi-flash";
- reg = <0 0x1000000>;
- bank-width = <2>;
- };
- };
-
pcie-controller {
status = "okay";
@@ -248,6 +220,34 @@
};
};
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor at 0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 09c9cabdf67a..9918c7883a36 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -99,34 +99,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- devbus-bootcs {
- status = "okay";
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <16>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 16 MiB */
- nor at 0 {
- compatible = "cfi-flash";
- reg = <0 0x1000000>;
- bank-width = <2>;
- };
- };
-
pcie-controller {
status = "okay";
@@ -233,6 +205,34 @@
};
};
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor at 0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <16>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 2e2cd9353761..c8dd5a3bccb6 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -70,34 +70,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
- devbus-bootcs {
- status = "okay";
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <16>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 128 MiB */
- nor at 0 {
- compatible = "cfi-flash";
- reg = <0 0x8000000>;
- bank-width = <2>;
- };
- };
-
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
@@ -222,6 +194,34 @@
};
};
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 128 MiB */
+ nor at 0 {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+};
+
&mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 06/19] ARM: dts: armada-370-xp: Fixup bootrom DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
bootrom has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 079494e52554..7598fb013355 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -65,7 +65,7 @@
soc {
compatible = "marvell,armada370-mbus", "simple-bus";
- bootrom {
+ bootrom at 01_e0_0 {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bb8f7dcaf656..5e596b64f48e 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -64,7 +64,7 @@
soc {
compatible = "marvell,armadaxp-mbus", "simple-bus";
- bootrom {
+ bootrom at 01_1d_0 {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
--
2.10.2
^ permalink raw reply related
* [PATCH v2 05/19] ARM: dts: armada-370-xp: Fixup mdio DT warning
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
MDIO has a reg property so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 24 +++++++--------
arch/arm/boot/dts/armada-370-mirabox.dts | 23 +++++++-------
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 16 +++++-----
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 24 +++++++--------
arch/arm/boot/dts/armada-370-rd.dts | 19 ++++++------
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 13 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 18 +++++------
.../dts/armada-370-seagate-personal-cloud.dtsi | 18 +++++------
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 12 ++++----
arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 20 ++++++------
arch/arm/boot/dts/armada-xp-db.dts | 36 +++++++++++-----------
arch/arm/boot/dts/armada-xp-gp.dts | 36 +++++++++++-----------
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 20 ++++++------
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 21 +++++++------
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 36 +++++++++++-----------
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 20 ++++++------
17 files changed, 181 insertions(+), 177 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 033fa63544f7..d26115085ea1 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -86,18 +86,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
- };
-
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -260,6 +248,18 @@
compatible = "linux,spdif-dir";
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&spi0 {
pinctrl-0 = <&spi0_pins2>;
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index d5e19cd4d256..3e1ef56b6319 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -113,17 +113,6 @@
};
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
- };
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -197,6 +186,18 @@
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&pinctrl {
pwr_led_pin: pwr-led-pin {
marvell,pins = "mpp63";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index a9e3810aea65..a6409853db6d 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -99,14 +99,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
- reg = <0>;
- };
- };
-
ethernet at 74000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
@@ -260,6 +252,14 @@
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+};
+
&pinctrl {
power_led_pin: power-led-pin {
marvell,pins = "mpp57";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 14c379699350..fd5f1d9a434a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -93,18 +93,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -282,6 +270,18 @@
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+};
+
&pinctrl {
poweroff: poweroff {
marvell,pins = "mpp60";
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index fbef730e8d37..621add7e12d5 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -102,14 +102,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
@@ -235,7 +227,16 @@
};
};
};
- };
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
&pinctrl {
fan_pins: fan-pins {
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index ae2e1fe50ef6..82ce5ec6467b 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -36,12 +36,6 @@
};
internal-regs {
- mdio {
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
- };
-
ethernet at 74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
@@ -131,3 +125,10 @@
1300 0>;
};
};
+
+&mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 3036e25c5992..724a47908e3f 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -51,15 +51,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
- };
-
ethernet at 70000 {
status = "okay";
pinctrl-0 = <&ge0_rgmii_pins>;
@@ -208,6 +199,15 @@
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
&pinctrl {
pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 01cded310cbc..fb52a34f0a35 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -51,15 +51,6 @@
status = "okay";
};
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
- };
-
ethernet at 74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
@@ -143,6 +134,15 @@
};
};
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
&pinctrl {
pinctrl-0 = <&sata_led_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index a9cc42776874..a696bbf0f703 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -127,12 +127,6 @@
status = "okay";
};
- mdio {
- phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy1>;
@@ -220,6 +214,12 @@
};
};
+&mdio {
+ phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+};
+
&pinctrl {
disk1_led_pin: disk1-led-pin {
marvell,pins = "mpp31";
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 54359896b76c..a4f9684def1c 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -259,7 +259,7 @@
status = "disabled";
};
- mdio: mdio {
+ mdio: mdio at 72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index ce152719bc28..7038c8625ac5 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -111,16 +111,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
- };
-
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -153,6 +143,16 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&pinctrl {
pinctrl-0 = <&phy_int_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 075120bc3ec4..665c81ff98db 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -160,24 +160,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
-
- phy2: ethernet-phy at 2 {
- reg = <25>;
- };
-
- phy3: ethernet-phy at 3 {
- reg = <27>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
@@ -266,6 +248,24 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy at 2 {
+ reg = <25>;
+ };
+
+ phy3: ethernet-phy at 3 {
+ reg = <27>;
+ };
+};
+
&spi0 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 190e4eccb180..09c9cabdf67a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -175,24 +175,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <16>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <17>;
- };
-
- phy2: ethernet-phy at 2 {
- reg = <18>;
- };
-
- phy3: ethernet-phy at 3 {
- reg = <19>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
@@ -251,6 +233,24 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <16>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <17>;
+ };
+
+ phy2: ethernet-phy at 2 {
+ reg = <18>;
+ };
+
+ phy3: ethernet-phy at 3 {
+ reg = <19>;
+ };
+};
+
&spi0 {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 8af463f26ea1..0a6a43692620 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -89,16 +89,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -296,6 +286,16 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+};
+
&pinctrl {
poweroff_pin: poweroff-pin {
marvell,pins = "mpp24";
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index b6bf5344fbbe..c4685cb86f06 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -153,16 +153,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -300,6 +290,17 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+};
+
+
&pinctrl {
poweroff: poweroff {
marvell,pins = "mpp42";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index ed3b889d16ce..2e2cd9353761 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -155,24 +155,6 @@
};
};
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
-
- phy2: ethernet-phy at 2 {
- reg = <2>;
- };
-
- phy3: ethernet-phy at 3 {
- reg = <3>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
@@ -240,6 +222,24 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy at 2 {
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ };
+};
+
&pinctrl {
led_pins: led-pins-0 {
marvell,pins = "mpp49", "mpp51", "mpp53";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index ae286736b90a..189ec7f4667c 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -150,16 +150,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 { /* Marvell 88E1512 */
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
status = "okay";
pinctrl-0 = <&ge0_rgmii_pins>;
@@ -240,6 +230,16 @@
};
};
+&mdio {
+ phy0: ethernet-phy at 0 { /* Marvell 88E1512 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+};
+
&pinctrl {
sata1_pwr_pin: sata1-pwr-pin {
marvell,pins = "mpp42";
--
2.10.2
^ permalink raw reply related
* [PATCH v2 04/19] ARM: dts: armada-370-xp: Use the node labels
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
Use the node label when possible. As a result it flattens the device tree
and it makes more visible the IP blocks specific to each SoC variant.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370.dtsi | 105 +++++++++++++++++++-------------------
arch/arm/boot/dts/armada-xp.dtsi | 76 +++++++++++++--------------
2 files changed, 91 insertions(+), 90 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 5ed086da1e51..079494e52554 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -134,14 +134,6 @@
wt-override;
};
- i2c0: i2c at 11000 {
- reg = <0x11000 0x20>;
- };
-
- i2c1: i2c at 11100 {
- reg = <0x11100 0x20>;
- };
-
gpio0: gpio at 18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -175,20 +167,6 @@
interrupts = <91>;
};
- /*
- * Default UART pinctrl setting without RTS/CTS, can
- * be overwritten on board level if a different
- * configuration is used.
- */
- uart0: serial at 12000 {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
- };
-
- uart1: serial at 12100 {
- pinctrl-0 = <&uart1_pins>;
- pinctrl-names = "default";
- };
systemc: system-controller at 18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -219,20 +197,6 @@
reg = <0x18330 0x4>;
};
- interrupt-controller at 20a00 {
- reg = <0x20a00 0x1d0>, <0x21870 0x58>;
- };
-
- timer at 20300 {
- compatible = "marvell,armada-370-timer";
- clocks = <&coreclk 2>;
- };
-
- watchdog at 20300 {
- compatible = "marvell,armada-370-wdt";
- clocks = <&coreclk 2>;
- };
-
cpuconf: cpu-config at 21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
@@ -248,14 +212,6 @@
status = "disabled";
};
- usb at 50000 {
- clocks = <&coreclk 0>;
- };
-
- usb at 51000 {
- clocks = <&coreclk 0>;
- };
-
xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
@@ -294,14 +250,6 @@
};
};
- ethernet at 70000 {
- compatible = "marvell,armada-370-neta";
- };
-
- ethernet at 74000 {
- compatible = "marvell,armada-370-neta";
- };
-
cesa: crypto@90000 {
compatible = "marvell,armada-370-crypto";
reg = <0x90000 0x10000>;
@@ -337,6 +285,59 @@
};
};
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c0 {
+ reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+ reg = <0x11100 0x20>;
+};
+
+&mpic {
+ reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-370-timer";
+ clocks = <&coreclk 2>;
+};
+
+&watchdog {
+ compatible = "marvell,armada-370-wdt";
+ clocks = <&coreclk 2>;
+};
+
+&usb0 {
+ clocks = <&coreclk 0>;
+};
+
+&usb1 {
+ clocks = <&coreclk 0>;
+};
+
+ð0 {
+ compatible = "marvell,armada-370-neta";
+};
+
+ð1 {
+ compatible = "marvell,armada-370-neta";
+};
+
&pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 654a61e525b4..bb8f7dcaf656 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -84,16 +84,6 @@
wt-override;
};
- i2c0: i2c at 11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c at 11100 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
uart2: serial at 12200 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart2_pins>;
@@ -150,26 +140,6 @@
clocks = <&coreclk 1>;
};
- interrupt-controller at 20a00 {
- reg = <0x20a00 0x2d0>, <0x21070 0x58>;
- };
-
- timer at 20300 {
- compatible = "marvell,armada-xp-timer";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- watchdog at 20300 {
- compatible = "marvell,armada-xp-wdt";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- cpurst at 20800 {
- reg = <0x20800 0x20>;
- };
-
cpu-config at 21000 {
compatible = "marvell,armada-xp-cpu-config";
reg = <0x21000 0x8>;
@@ -183,14 +153,6 @@
status = "disabled";
};
- usb at 50000 {
- clocks = <&gateclk 18>;
- };
-
- usb at 51000 {
- clocks = <&gateclk 19>;
- };
-
usb2: usb at 52000 {
compatible = "marvell,orion-ehci";
reg = <0x52000 0x500>;
@@ -308,6 +270,44 @@
};
};
+&i2c0 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+};
+
+&mpic {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+ compatible = "marvell,armada-xp-wdt";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+ reg = <0x20800 0x20>;
+};
+
+&usb0 {
+ clocks = <&gateclk 18>;
+};
+
+&usb1 {
+ clocks = <&gateclk 19>;
+};
+
&pinctrl {
ge0_gmii_pins: ge0-gmii-pins {
marvell,pins =
--
2.10.2
^ permalink raw reply related
* [PATCH v2 03/19] ARM: dts: armada-370-xp: add node labels
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
As it was previously done for kirkwood, this adds missing node labels to
Armada 370 and XP common and SoC specific nodes to allow to reference
them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 32 ++++++++++++++++----------------
arch/arm/boot/dts/armada-370.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 12 ++++++------
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 22 +++++++++++-----------
arch/arm/boot/dts/armada-xp.dtsi | 12 ++++++------
6 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 1d8171380fa0..54359896b76c 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -86,7 +86,7 @@
pcie-mem-aperture = <0xf8000000 0x7e00000>;
pcie-io-aperture = <0xffe00000 0x100000>;
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +96,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +106,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +116,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +126,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -142,7 +142,7 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <50>;
@@ -214,38 +214,38 @@
msi-controller;
};
- coherency-fabric at 20200 {
+ coherencyfab: coherency-fabric at 20200 {
compatible = "marvell,coherency-fabric";
reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
- timer at 20300 {
+ timer: timer at 20300 {
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
};
- watchdog at 20300 {
+ watchdog: watchdog at 20300 {
reg = <0x20300 0x34>, <0x20704 0x4>;
};
- cpurst at 20800 {
+ cpurst: cpurst at 20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x8>;
};
- pmsu at 22000 {
+ pmsu: pmsu at 22000 {
compatible = "marvell,armada-370-pmsu";
reg = <0x22000 0x1000>;
};
- usb at 50000 {
+ usb0: usb at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <45>;
status = "disabled";
};
- usb at 51000 {
+ usb1: usb at 51000 {
compatible = "marvell,orion-ehci";
reg = <0x51000 0x500>;
interrupts = <46>;
@@ -274,7 +274,7 @@
status = "disabled";
};
- sata at a0000 {
+ sata: sata at a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <55>;
@@ -283,7 +283,7 @@
status = "disabled";
};
- nand at d0000 {
+ nand: nand at d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -293,7 +293,7 @@
status = "disabled";
};
- mvsdio at d4000 {
+ sdio: mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <54>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 79b5463209aa..5ed086da1e51 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -70,7 +70,7 @@
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -89,7 +89,7 @@
0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -106,7 +106,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie2: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -190,7 +190,7 @@
pinctrl-names = "default";
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
};
@@ -208,14 +208,14 @@
#clock-cells = <1>;
};
- thermal at 18300 {
+ thermal: thermal at 18300 {
compatible = "marvell,armada370-thermal";
reg = <0x18300 0x4
0x18304 0x4>;
status = "okay";
};
- sscg at 18330 {
+ sscg: sscg at 18330 {
reg = <0x18330 0x4>;
};
@@ -233,7 +233,7 @@
clocks = <&coreclk 2>;
};
- cpu-config at 21000 {
+ cpuconf: cpu-config at 21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
};
@@ -256,7 +256,7 @@
clocks = <&coreclk 0>;
};
- xor at 60800 {
+ xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -275,7 +275,7 @@
};
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -302,7 +302,7 @@
compatible = "marvell,armada-370-neta";
};
- crypto at 90000 {
+ cesa: crypto at 90000 {
compatible = "marvell,armada-370-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 6e6d0f04bf2b..ebf79d6de1a1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -114,7 +114,7 @@
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
- pcie at 1,0 {
+ pcie1: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -131,7 +131,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie2: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- pcie at 3,0 {
+ pcie3: pcie at 3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -165,7 +165,7 @@
status = "disabled";
};
- pcie at 4,0 {
+ pcie4: pcie at 4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -182,7 +182,7 @@
status = "disabled";
};
- pcie at 5,0 {
+ pcie5: pcie at 5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index c5fdc99f0dbe..34e78a568460 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -129,7 +129,7 @@
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
- pcie at 1,0 {
+ pcie1: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -146,7 +146,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie2: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -163,7 +163,7 @@
status = "disabled";
};
- pcie at 3,0 {
+ pcie3: pcie at 3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -180,7 +180,7 @@
status = "disabled";
};
- pcie at 4,0 {
+ pcie4: pcie at 4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -197,7 +197,7 @@
status = "disabled";
};
- pcie at 5,0 {
+ pcie5: pcie at 5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
@@ -214,7 +214,7 @@
status = "disabled";
};
- pcie at 6,0 {
+ pcie6: pcie at 6,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
@@ -231,7 +231,7 @@
status = "disabled";
};
- pcie at 7,0 {
+ pcie7: pcie at 7,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
@@ -248,7 +248,7 @@
status = "disabled";
};
- pcie at 8,0 {
+ pcie8: pcie at 8,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
@@ -265,7 +265,7 @@
status = "disabled";
};
- pcie at 9,0 {
+ pcie9: pcie at 9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 0e24f1a38540..5148827ed934 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -150,7 +150,7 @@
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
- pcie at 1,0 {
+ pcie1: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -167,7 +167,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie2: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -184,7 +184,7 @@
status = "disabled";
};
- pcie at 3,0 {
+ pcie3: pcie at 3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -201,7 +201,7 @@
status = "disabled";
};
- pcie at 4,0 {
+ pcie4: pcie at 4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -218,7 +218,7 @@
status = "disabled";
};
- pcie at 5,0 {
+ pcie5: pcie at 5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
@@ -235,7 +235,7 @@
status = "disabled";
};
- pcie at 6,0 {
+ pcie6: pcie at 6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
@@ -252,7 +252,7 @@
status = "disabled";
};
- pcie at 7,0 {
+ pcie7: pcie at 7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
@@ -269,7 +269,7 @@
status = "disabled";
};
- pcie at 8,0 {
+ pcie8: pcie at 8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
@@ -286,7 +286,7 @@
status = "disabled";
};
- pcie at 9,0 {
+ pcie9: pcie at 9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
@@ -303,7 +303,7 @@
status = "disabled";
};
- pcie at 10,0 {
+ pcie10: pcie at 10,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index e141de2a4a1c..654a61e525b4 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -118,7 +118,7 @@
status = "disabled";
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x500>;
};
@@ -136,7 +136,7 @@
#clock-cells = <1>;
};
- thermal at 182b0 {
+ thermal: thermal at 182b0 {
compatible = "marvell,armadaxp-thermal";
reg = <0x182b0 0x4
0x184d0 0x4>;
@@ -191,7 +191,7 @@
clocks = <&gateclk 19>;
};
- usb at 52000 {
+ usb2: usb at 52000 {
compatible = "marvell,orion-ehci";
reg = <0x52000 0x500>;
interrupts = <47>;
@@ -199,7 +199,7 @@
status = "disabled";
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -227,7 +227,7 @@
compatible = "marvell,armada-xp-neta";
};
- crypto at 90000 {
+ cesa: crypto at 90000 {
compatible = "marvell,armada-xp-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -247,7 +247,7 @@
status = "disabled";
};
- xor at f0900 {
+ xor0: xor at f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
0xF0B00 0x100>;
--
2.10.2
^ permalink raw reply related
* [PATCH v2 02/19] ARM: dts: armada-370-xp: move the cpurst node in the common file
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
The cpurst nodes are identical in armada-370.dtsi and armada-xp.dtsi
files, so move it in the common armada-370-xp.dtsi file.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 5 +++++
arch/arm/boot/dts/armada-370.dtsi | 5 -----
arch/arm/boot/dts/armada-xp.dtsi | 1 -
3 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 3ccedc9dffb2..1d8171380fa0 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -228,6 +228,11 @@
reg = <0x20300 0x34>, <0x20704 0x4>;
};
+ cpurst at 20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x8>;
+ };
+
pmsu at 22000 {
compatible = "marvell,armada-370-pmsu";
reg = <0x22000 0x1000>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b4258105e91f..79b5463209aa 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -233,11 +233,6 @@
clocks = <&coreclk 2>;
};
- cpurst at 20800 {
- compatible = "marvell,armada-370-cpu-reset";
- reg = <0x20800 0x8>;
- };
-
cpu-config at 21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 4a5f99e65b51..e141de2a4a1c 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -167,7 +167,6 @@
};
cpurst at 20800 {
- compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x20>;
};
--
2.10.2
^ permalink raw reply related
* [PATCH v2 01/19] ARM: dts: armada-xp-matrix: Fix the location of the pcie-controller node
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161113212402.3060-1-gregory.clement@free-electrons.com>
In the dts for the Marvell Armada XP Matrix board the pcie-controller was
located under the internal-regs node whereas it belongs to the soc node.
It means that, until this fix, the pcie could not work for this board
because it didn't match the definition of the pcie-controller node in the
dtsi file. If we had a look on the decompiled dtb file we saw two
different instances of the pcie-controller node: one with the all the
resource set but disabled and the other without any resource but enabled.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp-matrix.dts | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 6522b04f4a8e..e1509f4c5114 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -71,6 +71,15 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+
internal-regs {
serial at 12000 {
status = "okay";
@@ -99,15 +108,6 @@
};
};
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
-
usb at 50000 {
status = "okay";
};
--
2.10.2
^ permalink raw reply related
* [PATCH v2 00/19] Various Armada 370/XP DT warning fixup
From: Gregory CLEMENT @ 2016-11-13 21:23 UTC (permalink / raw)
To: linux-arm-kernel
As it was done a few months ago for kirkwood, this patchset fixes up
various warning from the DT compiler when using the flag W=1 with
make.
In this second version I used the target and attributes property of
the memory windows when MBUS_ID. Indeed by adding this information to
the unit-address is really uniq as required bu the epar as explained
in this email:
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/466941.html.
As for the first version, the only remaining warnings are the following:
DTC arch/arm/boot/dts/armada-370-db.dtb
Warning (unit_address_vs_reg): Node /sound/simple-audio-card,dai-link at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound/simple-audio-card,dai-link at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound/simple-audio-card,dai-link at 2 has a unit name, but no reg property
However it seems a false positive as here the '@' is part of the name
of the node and is not a reference of an address. Moreover the node
name is directly used by the driver so it must not be modified.
Gregory
Gregory CLEMENT (19):
ARM: dts: armada-xp-matrix: Fix the location of the pcie-controller
node
ARM: dts: armada-370-xp: move the cpurst node in the common file
ARM: dts: armada-370-xp: add node labels
ARM: dts: armada-370-xp: Use the node labels
ARM: dts: armada-370-xp: Fixup mdio DT warning
ARM: dts: armada-370-xp: Fixup bootrom DT warning
ARM: dts: armada-370-xp: Fixup devbus DT warning
ARM: dts: armada-370-xp: Fixup bm-bppi DT warning
ARM: dts: armada-370-xp: Fixup sa-ram DT warning
ARM: dts: armada-xp: Fixup pcie DT warnings
ARM: dts: armada-370: Fixup pcie DT warnings
ARM: dts: armada-370-xp: Remove skeleton.dtsi
ARM: dts: armada-370-xp: Fixup l2-cache DT warning
ARM: dts: armada-370-xp: Fixup internal-regs DT warning
ARM: dts: armada-370-xp: Fixup soc DT warning
ARM: dts: armada-370-xp: Fixup memory DT warning
ARM: dts: armada-370-xp: Remove address from dsa unit name
ARM: dts: armada-370-xp: Remove button address and fixup names
ARM: dts: armada-370-xp: Fixup regulator DT warning
arch/arm/boot/dts/armada-370-db.dts | 67 ++++----
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 34 ++---
arch/arm/boot/dts/armada-370-mirabox.dts | 61 ++++----
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 54 +++----
arch/arm/boot/dts/armada-370-netgear-rn104.dts | 62 ++++----
arch/arm/boot/dts/armada-370-rd.dts | 61 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 31 ++--
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 49 +++---
.../dts/armada-370-seagate-personal-cloud-2bay.dts | 4 +-
.../boot/dts/armada-370-seagate-personal-cloud.dts | 4 +-
.../dts/armada-370-seagate-personal-cloud.dtsi | 48 +++---
arch/arm/boot/dts/armada-370-synology-ds213j.dts | 22 +--
arch/arm/boot/dts/armada-370-xp.dtsi | 43 +++---
arch/arm/boot/dts/armada-370.dtsi | 144 +++++++++--------
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 72 ++++-----
arch/arm/boot/dts/armada-xp-db.dts | 170 ++++++++++-----------
arch/arm/boot/dts/armada-xp-gp.dts | 146 +++++++++---------
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 57 ++++---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 56 +++----
arch/arm/boot/dts/armada-xp-matrix.dts | 24 +--
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 24 +--
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 26 ++--
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 71 ++++-----
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 124 +++++++--------
arch/arm/boot/dts/armada-xp-synology-ds414.dts | 79 +++++-----
arch/arm/boot/dts/armada-xp.dtsi | 106 ++++++-------
27 files changed, 832 insertions(+), 823 deletions(-)
--
2.10.2
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox