messages from 2020-06-17 16:49:07 to 2020-06-18 01:54:17 UTC [more...]
[PATCH AUTOSEL 4.19 002/172] clk: sunxi: Fix incorrect usage of round_down()
2020-06-18 1:19 UTC (5+ messages)
` [PATCH AUTOSEL 4.19 012/172] ARM: integrator: Add some Kconfig selections
` [PATCH AUTOSEL 4.19 022/172] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
` [PATCH AUTOSEL 4.19 024/172] serial: 8250: Fix max baud limit in generic 8250 port
` [PATCH AUTOSEL 4.19 026/172] PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
[PATCH AUTOSEL 5.4 002/266] clk: sunxi: Fix incorrect usage of round_down()
2020-06-18 1:16 UTC (41+ messages)
` [PATCH AUTOSEL 5.4 005/266] ASoC: SOF: imx8: Fix randbuild error
` [PATCH AUTOSEL 5.4 014/266] ARM: integrator: Add some Kconfig selections
` [PATCH AUTOSEL 5.4 015/266] ARM: dts: stm32: Add missing ethernet PHY reset on AV96
` [PATCH AUTOSEL 5.4 018/266] arm64: dts: meson: fixup SCP sram nodes
` [PATCH AUTOSEL 5.4 030/266] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
` [PATCH AUTOSEL 5.4 032/266] serial: 8250: Fix max baud limit in generic 8250 port
` [PATCH AUTOSEL 5.4 036/266] arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes
` [PATCH AUTOSEL 5.4 037/266] arm64: dts: armada-3720-turris-mox: fix SFP binding
` [PATCH AUTOSEL 5.4 038/266] arm64: dts: juno: Fix GIC child nodes
` [PATCH AUTOSEL 5.4 042/266] arm64: dts: fvp: "
` [PATCH AUTOSEL 5.4 043/266] PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
` [PATCH AUTOSEL 5.4 045/266] arm64: dts: fvp/juno: Fix node address fields
` [PATCH AUTOSEL 5.4 047/266] coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()
` [PATCH AUTOSEL 5.4 057/266] clk: zynqmp: fix memory leak in zynqmp_register_clocks
` [PATCH AUTOSEL 5.4 079/266] ASoC: meson: add missing free_irq() in error path
` [PATCH AUTOSEL 5.4 087/266] arm64: dts: mt8173: fix unit name warnings
` [PATCH AUTOSEL 5.4 090/266] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
` [PATCH AUTOSEL 5.4 107/266] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
` [PATCH AUTOSEL 5.4 108/266] clk: meson: meson8b: Fix the polarity of the RESET_N lines
` [PATCH AUTOSEL 5.4 109/266] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
` [PATCH AUTOSEL 5.4 112/266] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
` [PATCH AUTOSEL 5.4 137/266] pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
` [PATCH AUTOSEL 5.4 155/266] usb/ohci-platform: Fix a warning when hibernating
` [PATCH AUTOSEL 5.4 161/266] clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
` [PATCH AUTOSEL 5.4 162/266] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
` [PATCH AUTOSEL 5.4 166/266] firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
` [PATCH AUTOSEL 5.4 175/266] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
` [PATCH AUTOSEL 5.4 180/266] usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
` [PATCH AUTOSEL 5.4 186/266] mfd: stmfx: Reset chip on resume as supply was disabled
` [PATCH AUTOSEL 5.4 187/266] mfd: stmfx: Fix stmfx_irq_init error path
` [PATCH AUTOSEL 5.4 188/266] mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
` [PATCH AUTOSEL 5.4 193/266] clk: bcm2835: Fix return type of bcm2835_register_gate
` [PATCH AUTOSEL 5.4 199/266] misc: xilinx-sdfec: improve get_user_pages_fast() error handling
` [PATCH AUTOSEL 5.4 212/266] mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
` [PATCH AUTOSEL 5.4 221/266] scsi: ufs: Don't update urgent bkops level when toggling auto bkops
` [PATCH AUTOSEL 5.4 222/266] pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
` [PATCH AUTOSEL 5.4 223/266] pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
` [PATCH AUTOSEL 5.4 224/266] pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error "
` [PATCH AUTOSEL 5.4 257/266] drm/sun4i: hdmi ddc clk: Fix size of m divider
` [PATCH AUTOSEL 5.4 259/266] scsi: acornscsi: Fix an error handling path in acornscsi_probe()
[PATCH V3 (RESEND) 0/3] arm64: Enable vmemmap mapping from device memory
2020-06-18 1:15 UTC (4+ messages)
` [PATCH V3 (RESEND) 1/3] mm/sparsemem: Enable vmem_altmap support in vmemmap_populate_basepages()
` [PATCH V3 (RESEND) 2/3] mm/sparsemem: Enable vmem_altmap support in vmemmap_alloc_block_buf()
` [PATCH V3 (RESEND) 3/3] arm64/mm: Enable vmem_altmap support for vmemmap mappings
[PATCH AUTOSEL 5.7 003/388] clk: sunxi: Fix incorrect usage of round_down()
2020-06-18 1:07 UTC (73+ messages)
` [PATCH AUTOSEL 5.7 007/388] ASoC: SOF: imx8: Fix randbuild error
` [PATCH AUTOSEL 5.7 017/388] ARM: integrator: Add some Kconfig selections
` [PATCH AUTOSEL 5.7 018/388] ARM: dts: stm32: Add missing ethernet PHY reset on AV96
` [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible
` [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes
` [PATCH AUTOSEL 5.7 031/388] PCI: brcmstb: Fix window register offset from 4 to 8
` [PATCH AUTOSEL 5.7 039/388] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
` [PATCH AUTOSEL 5.7 042/388] usb: roles: Switch on role-switch uevent reporting
` [PATCH AUTOSEL 5.7 043/388] serial: 8250: Fix max baud limit in generic 8250 port
` [PATCH AUTOSEL 5.7 048/388] arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes
` [PATCH AUTOSEL 5.7 049/388] arm64: dts: armada-3720-turris-mox: fix SFP binding
` [PATCH AUTOSEL 5.7 050/388] arm64: dts: juno: Fix GIC child nodes
` [PATCH AUTOSEL 5.7 056/388] arm64: dts: fvp: "
` [PATCH AUTOSEL 5.7 057/388] PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
` [PATCH AUTOSEL 5.7 059/388] arm64: dts: fvp/juno: Fix node address fields
` [PATCH AUTOSEL 5.7 062/388] coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()
` [PATCH AUTOSEL 5.7 075/388] clk: zynqmp: fix memory leak in zynqmp_register_clocks
` [PATCH AUTOSEL 5.7 089/388] clk: sprd: fix compile-testing
` [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails
` [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path
` [PATCH AUTOSEL 5.7 108/388] media: s5p-mfc: Properly handle dma_parms for the allocated devices
` [PATCH AUTOSEL 5.7 114/388] ARM: dts: bcm283x: Use firmware PM driver for V3D
` [PATCH AUTOSEL 5.7 115/388] arm64: dts: realtek: rtd129x: Fix GIC CPU masks for RTD1293
` [PATCH AUTOSEL 5.7 118/388] staging: mt7621-pci: fix PCIe interrupt mapping
` [PATCH AUTOSEL 5.7 119/388] arm64: dts: mt8173: fix unit name warnings
` [PATCH AUTOSEL 5.7 122/388] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
` [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
` [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines
` [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
` [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible
` [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name
` [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
` [PATCH AUTOSEL 5.7 164/388] ARM: dts: aspeed: ast2600: Set arch timer always-on
` [PATCH AUTOSEL 5.7 165/388] ARM: dts: aspeed: Change KCS nodes to v2 binding
` [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init
` [PATCH AUTOSEL 5.7 182/388] PCI: brcmstb: Assert fundamental reset on initialization
` [PATCH AUTOSEL 5.7 184/388] remoteproc/mediatek: fix invalid use of sizeof in scp_ipi_init()
` [PATCH AUTOSEL 5.7 196/388] pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
` [PATCH AUTOSEL 5.7 214/388] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
` [PATCH AUTOSEL 5.7 221/388] PCI: aardvark: Train link immediately after enabling training
` [PATCH AUTOSEL 5.7 222/388] PCI: aardvark: Improve link training
` [PATCH AUTOSEL 5.7 223/388] PCI: aardvark: Issue PERST via GPIO
` [PATCH AUTOSEL 5.7 227/388] iommu/arm-smmu-v3: Don't reserve implementation defined register space
` [PATCH AUTOSEL 5.7 229/388] usb/ohci-platform: Fix a warning when hibernating
` [PATCH AUTOSEL 5.7 235/388] coresight: Fix support for sparsely populated ports
` [PATCH AUTOSEL 5.7 236/388] coresight: etm4x: Fix use-after-free of per-cpu etm drvdata
` [PATCH AUTOSEL 5.7 238/388] clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
` [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
` [PATCH AUTOSEL 5.7 244/388] firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
` [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
` [PATCH AUTOSEL 5.7 266/388] usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
` [PATCH AUTOSEL 5.7 269/388] pinctrl: Fix return value about devm_platform_ioremap_resource()
` [PATCH AUTOSEL 5.7 273/388] mfd: stmfx: Reset chip on resume as supply was disabled
` [PATCH AUTOSEL 5.7 274/388] mfd: stmfx: Fix stmfx_irq_init error path
` [PATCH AUTOSEL 5.7 275/388] mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
` [PATCH AUTOSEL 5.7 282/388] clk: bcm2835: Fix return type of bcm2835_register_gate
` [PATCH AUTOSEL 5.7 284/388] clk: zynqmp: Fix divider2 calculation
` [PATCH AUTOSEL 5.7 292/388] misc: xilinx-sdfec: improve get_user_pages_fast() error handling
` [PATCH AUTOSEL 5.7 300/388] ARM: davinci: fix build failure without I2C
` [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
` [PATCH AUTOSEL 5.7 310/388] mailbox: imx: Fix return in imx_mu_scu_xlate()
` [PATCH AUTOSEL 5.7 311/388] mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
` [PATCH AUTOSEL 5.7 317/388] pwm: imx27: Fix rounding behavior
` [PATCH AUTOSEL 5.7 321/388] scsi: ufs: Don't update urgent bkops level when toggling auto bkops
` [PATCH AUTOSEL 5.7 323/388] pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
` [PATCH AUTOSEL 5.7 324/388] pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
` [PATCH AUTOSEL 5.7 325/388] pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
` [PATCH AUTOSEL 5.7 326/388] pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error "
` [PATCH AUTOSEL 5.7 356/388] mailbox: imx: Add context save/restore for suspend/resume
` [PATCH AUTOSEL 5.7 357/388] arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
` [PATCH AUTOSEL 5.7 370/388] drm/sun4i: hdmi ddc clk: Fix size of m divider
` [PATCH AUTOSEL 5.7 372/388] scsi: acornscsi: Fix an error handling path in acornscsi_probe()
[PATCH v8 0/9] SCMI Notifications Core Support
2020-06-17 23:31 UTC (7+ messages)
` [PATCH v8 2/9] firmware: arm_scmi: Add notification callbacks-registration
` [PATCH v8 3/9] firmware: arm_scmi: Add notification dispatch and delivery
[PATCH 1/2] ARM: dts: imx6qdl-sabresd: Pass phy-reset-duration
2020-06-17 23:22 UTC (2+ messages)
` [PATCH 2/2] ARM: dts: imx6qdl-sabresd: Add an mdio node
[PATCH v5 0/4] Introduce TEE based Trusted Keys support
2020-06-17 23:14 UTC (5+ messages)
` [PATCH v5 1/4] KEYS: trusted: Add generic trusted keys framework
❌ FAIL: Test report for kernel 5.8.0-rc1-b9249cb.cki (arm-next)
2020-06-17 22:51 UTC
[PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
2020-06-17 22:48 UTC (4+ messages)
` [PATCH v6 1/3] serial: 8250: Add 8250 port clock update method
` [PATCH v6 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
` [PATCH v6 3/3] serial: 8250_dw: Fix common clocks usage race condition
[PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-06-17 22:45 UTC (3+ messages)
[PATCH v3 0/5] dt-bindings: display: ti,tfp410.txt: convert to yaml
2020-06-17 22:43 UTC (7+ messages)
` [PATCH v3 5/5] dt-bindings: display: ti, tfp410.yaml: make the ports node optional
` [PATCH v3 5/5] dt-bindings: display: ti,tfp410.yaml: "
[PATCH v8 0/7] iommu/arm-smmu: Enable split pagetable support
2020-06-17 22:40 UTC (3+ messages)
` [PATCH v8 3/7] dt-bindings: arm-smmu: Add compatible string for Adreno GPU SMMU
[PATCH 1/5] dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
2020-06-17 22:39 UTC (4+ messages)
` [PATCH 4/5] dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO
[PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support
2020-06-17 22:23 UTC (4+ messages)
` [PATCH v2 "
` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings
[PATCH v2 0/3] add RTT support for SAM9X60
2020-06-17 22:22 UTC (3+ messages)
` [PATCH v2 2/3] dt-bindings: rtc: add microchip,sam9x60-rtt
[PATCH 0/2] clk: meson: g12a: Add the NNA source clocks
2020-06-17 22:18 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs
Any progress on R_ARM_THM_JUMP11 issues?
2020-06-17 22:18 UTC
[PATCH v2 0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
2020-06-17 22:05 UTC (3+ messages)
` [PATCH v2 1/8] dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
[GIT PULL 1/1] bcm2835-drivers-fixes-2020-0-17
2020-06-17 22:03 UTC (2+ messages)
[PATCH v3] arm64: mm: reserve hugetlb CMA after numa_init
2020-06-17 21:58 UTC
[PATCH 1/3] ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
2020-06-17 21:54 UTC (5+ messages)
` [PATCH 2/3] ARM: dts: NSP: Correct amac_base lengths, mailbox reg and add amac3
[PATCH v2] arm64: mm: reserve hugetlb CMA after numa_init
2020-06-17 21:43 UTC (5+ messages)
[PATCH 0/8] clk: bcm63xx-gate: introduce dt-bindings definitions
2020-06-17 21:40 UTC (17+ messages)
` [PATCH 1/8] mips: bmips: add BCM3368 clock definitions
` [PATCH 2/8] mips: bmips: add BCM6318 "
` [PATCH 3/8] mips: bmips: add BCM6328 "
` [PATCH 4/8] mips: bmips: add BCM6358 "
` [PATCH 5/8] mips: bmips: add BCM6362 "
` [PATCH 6/8] mips: bmips: add BCM6368 "
` [PATCH 7/8] mips: bmips: add BCM63268 "
` [PATCH 8/8] clk: bcm63xx-gate: switch to dt-bindings definitions
[PATCH v3 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver
2020-06-17 21:37 UTC (6+ messages)
` [PATCH v3 1/2] dt-bindings: phy: add bcm63xx-usbh bindings
` [PATCH v3 2/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver
[PATCH 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver
2020-06-17 21:35 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: phy: add bcm63xx-usbh bindings
[PATCH 1/3] ARM: dts: at91: sama5d2_xplained: classd: pull-down the R1 and R3 lines
2020-06-17 21:34 UTC (6+ messages)
` [PATCH 2/3] ARM: dts: at91: sam9x60ek: classd: pull-down the L1 and L3 lines
` [PATCH 3/3] Revert "ARM: at91/dt: sama5d2 Xplained: add pdmic node"
[PATCH][next] arm64: kexec_file: Use struct_size() in kmalloc()
2020-06-17 21:34 UTC
[PATCH v4 00/10] Add MMC and DMA support for Actions S700
2020-06-17 21:16 UTC (3+ messages)
` [PATCH v4 05/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
[PATCH v6 0/8] Add Rockchip NFC drivers for RK3308 and others
2020-06-17 21:15 UTC (4+ messages)
` [PATCH v6 1/8] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
[PATCH v6 0/4] mmc: mediatek: add mmc cqhci support
2020-06-17 21:02 UTC (3+ messages)
` [PATCH v6 4/4] dt-bindings: mmc: mediatek: Add document for mt6779
[v1 PATCH 0/2] Adding support to carry IMA measurement logs
2020-06-17 20:43 UTC (3+ messages)
` [v1 PATCH 2/2] Add Documentation regarding the ima-kexec-buffer node in the chosen node documentation
[PATCH v6 0/5] iommu/arm-smmu: Split pagetable support for arm-smmu-v2
2020-06-17 20:37 UTC (4+ messages)
` [PATCH v6 4/5] drm/msm: Refactor address space initialization
[PATCH v5 0/7] arm_pmu: Use NMI for perf interrupt
2020-06-17 20:23 UTC (9+ messages)
` [PATCH v5 1/7] arm64: perf: Add missing ISB in armv8pmu_enable_event()
` [PATCH v5 2/7] arm64: perf: Avoid PMXEV* indirection
` [PATCH v5 3/7] arm64: perf: Remove PMU locking
` [PATCH v5 6/7] arm_pmu: Introduce pmu_irq_ops
[PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline
2020-06-17 20:21 UTC (3+ messages)
` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas
arm64/for-kernelci baseline: 22 runs, 1 regressions (v5.8-rc1-8-gb9249cba25a5)
2020-06-17 19:21 UTC
[PATCH v3 0/9] Raspberry Pi 4 USB firmware initialization rework
2020-06-17 19:21 UTC (3+ messages)
` [PATCH v3 4/9] ARM: dts: bcm2711: Add reset controller to xHCI node
arm64/for-kernelci build: 2 builds: 1 failed, 1 passed, 1 error, 8 warnings (v5.8-rc1-8-gb9249cba25a5)
2020-06-17 18:38 UTC
[PATCH 0/5] arm64: vdso: getcpu() support
2020-06-17 18:25 UTC (2+ messages)
[PATCH v2] pinctrl: single: fix function name in documentation
2020-06-17 18:05 UTC
[PATCH v5 07/12] PCI: brcmstb: Add control of rescal reset
2020-06-17 17:32 UTC (3+ messages)
[PATCH v5 09/12] PCI: brcmstb: Set internal memory viewport sizes
2020-06-17 17:28 UTC (3+ messages)
[PATCH] coresight: cti: Fix error handling in probe
2020-06-17 17:15 UTC (2+ messages)
` [PATCH v2] "
[RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
2020-06-17 17:08 UTC (3+ messages)
[PATCH v2 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver
2020-06-17 17:05 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: phy: add bcm63xx-usbh bindings
[PATCH v3 0/3] mmc: Adding support for Microchip Sparx5 SoC
2020-06-17 17:02 UTC (3+ messages)
` [PATCH v3 1/3] dt-bindings: mmc: Add Sparx5 SDHCI controller bindings
[PATCH V3] dt-bindings: mmc: Convert imx esdhc to json-schema
2020-06-17 17:00 UTC (2+ messages)
[PATCH] Input: document inhibiting
2020-06-17 16:52 UTC (3+ messages)
` [PATCH v2] "
[PATCH 00/11] Add CMU/RMU/DMA support for Actions Semi S500 SoCs
2020-06-17 16:48 UTC (9+ messages)
` [PATCH 02/11] arm: dts: owl-s500: Add Clock Management Unit
` [PATCH 03/11] arm: dts: owl-s500: Set UART clock refs from CMU
` [PATCH 04/11] arm: dts: owl-s500-roseapplepi: Use UART clock "
` [PATCH 06/11] clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
` [PATCH 07/11] arm: dts: owl-s500: Add DMA controller
` [PATCH 08/11] dt-bindings: reset: Add binding constants for Actions S500 RMU
` [PATCH 09/11] clk: actions: Add Actions S500 SoC Reset Management Unit support
` [PATCH 10/11] arm: dts: owl-s500: Add Reset Controller support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).