* [PATCH v2 6/6] arm64: hyperv: Implement hv_is_isolation_supported() for CCA Realms
From: Kameron Carr @ 2026-06-25 17:35 UTC (permalink / raw)
To: kys, haiyangz, wei.liu, decui, longli
Cc: catalin.marinas, will, mark.rutland, lpieralisi, sudeep.holla,
arnd, thuth, linux-hyperv, linux-arm-kernel, linux-kernel,
linux-arch, mhklinux
In-Reply-To: <20260625173500.1995481-1-kameroncarr@linux.microsoft.com>
Provide an arm64 implementation of hv_is_isolation_supported() that
overrides the __weak default in drivers/hv/hv_common.c.
The implementation deliberately does not depend on
hv_is_hyperv_initialized() because hv_common_init() consults
hv_is_isolation_supported() before hyperv_initialized is set.
Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
---
arch/arm64/hyperv/mshyperv.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
index 8e8148b723d9c..62995b6133f6f 100644
--- a/arch/arm64/hyperv/mshyperv.c
+++ b/arch/arm64/hyperv/mshyperv.c
@@ -169,3 +169,8 @@ bool hv_isolation_type_cca(void)
{
return is_realm_world();
}
+
+bool hv_is_isolation_supported(void)
+{
+ return is_realm_world();
+}
--
2.45.4
^ permalink raw reply related
* [PATCH v7 03/27] phy: rockchip: usbdp: Do not lose USB3 PHY status
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
By default (i.e. without manually enabling runtime PM) DWC3 requests the
USB3 PHY once and keeps it enabled all the time. When DisplayPort is
being requested later on, a mode change is needed. This re-initializes
the PHY. During re-initialization the status variable has incorrectly
been cleared, which means the tracking information for USB3 is lost.
This is not an immediate problem, since the DP side keeps the PHY
enabled. But once DP is toggled off, the whole PHY will be disabled.
This is a problem, because the USB side still needs it powered.
Fix things by not clearing the status flags.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index a5ffdf7a6e76..12dfdd470a78 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1008,7 +1008,6 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
rk_udphy_u3_port_disable(udphy, false);
udphy->mode_change = false;
} else if (udphy->mode_change) {
- udphy->status = UDPHY_MODE_NONE;
if (udphy->mode == UDPHY_MODE_DP)
rk_udphy_u3_port_disable(udphy, true);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 02/27] phy: rockchip: usbdp: Update mode_change after error handling
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
If rk_udphy_init() or rk_udphy_setup() fails, the reinit will not be
tried again. Fix this by only updating the variable after all potential
errors have been handled.
Note, that no errors have been seen on real hardware and failures would
most likely be fatal and require at least a full reboot as the function
already asserts the PHY reset lines. So this is more of a theoretical
issue.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612163835.8D5471F000E9@smtp.kernel.org/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index fba35510d88c..a5ffdf7a6e76 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1000,15 +1000,14 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
}
if (udphy->status == UDPHY_MODE_NONE) {
- udphy->mode_change = false;
ret = rk_udphy_setup(udphy);
if (ret)
return ret;
if (udphy->mode & UDPHY_MODE_USB)
rk_udphy_u3_port_disable(udphy, false);
- } else if (udphy->mode_change) {
udphy->mode_change = false;
+ } else if (udphy->mode_change) {
udphy->status = UDPHY_MODE_NONE;
if (udphy->mode == UDPHY_MODE_DP)
rk_udphy_u3_port_disable(udphy, true);
@@ -1017,6 +1016,7 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
ret = rk_udphy_setup(udphy);
if (ret)
return ret;
+ udphy->mode_change = false;
}
udphy->status |= mode;
--
2.53.0
^ permalink raw reply related
* [PATCH v7 01/27] dt-bindings: phy: rockchip-usbdp: add improved ports scheme
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Currently the Rockchip USBDP PHY is missing a documented port scheme.
Meanwhile upstream RK3588 DTS files are a bit messy and use different
port schemes. The upstream USBDP PHY Linux kernel driver does not yet
parse the ports at all and thus does not create any implicit ABI either.
But with the current mess it is not possible to properly support USB-C
DP AltMode. Thus this introduces a proper port scheme following roughly
the ports design of the Qualcomm QMP USB4-USB3-DP PHY controller binding
with a slight difference that there is an additional port for the
USB-C SBU port as the Rockchip USB-DP PHY also contains the SBU mux.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/phy/phy-rockchip-usbdp.yaml | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
index 8b7059d5b182..f728acf057e4 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -114,6 +114,29 @@ properties:
A port node to link the PHY to a TypeC controller for the purpose of
handling orientation switching.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoint of the PHY for USB (or DP when configured into 4 lane
+ mode), which should point to the superspeed port of a USB connector.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Incoming endpoint from the USB controller
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Incoming endpoint from the DisplayPort controller
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoint of the PHY for DP, which should either point to the
+ SBU port of a USB-C connector or a DisplayPort connector input port.
+
required:
- compatible
- reg
--
2.53.0
^ permalink raw reply related
* [PATCH v7 04/27] phy: rockchip: usbdp: Fix devm_clk_bulk_get_all check
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
If devm_clk_bulk_get_all() returns -EPROBE_DEFER, it is replaced with
-ENODEV, permanently failing the driver probe instead of allowing it to
defer. Avoid masking the error code to fix the issue.
This effectively drops returning -ENODEV in case no clocks are being
described in DT. This special case will now be handled by the follow-up
check searching for "refclk" and exit with -EINVAL.
None of this will be hit in practice, since the driver is only used by
RK3588 and RK3576 - on these platforms the DT is validated to contain
the clocks and the clock driver is force probed early. Thus there is
no need to backport this.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612164107.C7DB21F000E9@smtp.kernel.org/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 12dfdd470a78..2845a012eafc 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -427,8 +427,8 @@ static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev)
int i;
udphy->num_clks = devm_clk_bulk_get_all(dev, &udphy->clks);
- if (udphy->num_clks < 1)
- return -ENODEV;
+ if (udphy->num_clks < 0)
+ return udphy->num_clks;
/* used for configure phy reference clock frequency */
for (i = 0; i < udphy->num_clks; i++) {
--
2.53.0
^ permalink raw reply related
* [PATCH v7 00/27] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko, William Wu
This series overhauls the Rockchip USBDP driver; apart from a
a bunch of cleanups and small improvements the main goal is to
get the driver ready for proper USB-C DP AltMode support. At
the moment it only contains a semi-working state.
Once this series has landed, it unblocks enabling proper USB-C
DP AltMode on the RK3588 and RK3576 platforms incl. runtime PM
for the Synopsys DesignWare DisplayPort controller.
Apart from this series, further changes are required on the
DRM side. There are no compile-time dependencies between the
DRM side and the PHY side, but the PHY side must be applied
to avoid SErrors once runtime PM is added to the DisplayPort
controller driver. Thus it would be really good to land this
series ASAP as it blocks the DRM side.
Apart from that it also fixes a bunch of issues pointed out by
Sashiko (mostly harmless), as well as some real problems. Among
other things it should help drastically with orientation switch
problems and potential SErrors when a USB-C device is hot-plugged.
Changes in v7:
- Link to v6: https://lore.kernel.org/r/20260619-rockchip-usbdp-cleanup-v6-0-3bb1f54b3f35@collabora.com
- Add new patch handling missing clock-names in DT gracefully (Sashiko)
- Add new patch handling rk_udphy_reset_deassert_all errors in init check (Sashiko)
- Add new patch to handle Properly handle TYPEC_STATE_SAFE and TYPEC_STATE_USB (Sashiko)
- Add new patch to avoid xHCI SErrors
Changes in v6:
- Link to v5: https://lore.kernel.org/r/20260612-rockchip-usbdp-cleanup-v5-0-efc83069869f@collabora.com
- Add explicit <linux/string_choices.h> include in last patch (Sashiko)
- Add new patch moving mode_change update after error handling (Sashiko)
- Add new patch fixing error masking of devm_clk_bulk_get_all() (Sashiko)
- Add new patch dropping seamless DP takeover as it is non-functional and buggy (Sashiko)
- Add new patch limiting DP lane count to muxed lanes (Sashiko)
- Add error handling in the patch that keeps clocks running on PHY re-init (Sashiko)
- Also look for DP being configured to second lane for the flip config
in DP single-lane mode, which should at least keep USB working for
this super unusual config (Sashiko)
- Drop useless ret variable in patch introducing guard() for the mutex
- Add error handling for PHY re-enablement in the patch fixing support for
DP-only -> USB mode (Sashiko)
Changes in v5:
- Link to v4: https://lore.kernel.org/r/20260428-rockchip-usbdp-cleanup-v4-0-7775671ece22@collabora.com
- Picked up Acked-by from Rob Herring for DT binding
- Fix typos in commit messages/comments
- Add Fixes tag to "Do not looe USB3 PHY status" patch
- Collect Reviewed-by: Neil Armstrong for multiple patches
- Drop now unused code from "Drop DP HPD handling" patch (Sashiko)
- Ignore mux events not involving DP AltMode (Sashiko)
- Add new patch to support going back from DP only mode to USB combo
mode; technically this is a fix, but DP mode does not yet work
upstream, so it does not matter (Sashiko)
- Add new patch adding a few debug messages, which are useful
to investigate potential hotplug issues in the future
- Sashiko comments about the DT binding and property usage
are wrong as the first port is for the superspeed lanes
used for DP and USB, while the last port is just about
DP aux. I ignored them.
- There is a pre-existing bug, that can already be hit with the
upstream kernel and that the series doesn't fix properly:
Accessing the USB3 controller registers requires the USB PHY
running, since it provides a clock. Re-initializing the PHY
means there is a race-condition - if the system tries to access
the USB3 controller in parallel to the re-init, the system will
hang and/or fail with an SError. By keeping the clocks running
and only asserting the resets this time is minimized by this
series. A proper fix for this will be looked into independently
from this series.
- I used v7.1-rc6 as base, but the driver has no changes since
6.18 even in linux-next and there are no pending patches for
it on the mailinglist either, so it applies to *any* recent
kernel branch.
Changes in v4:
- Link to v3: https://lore.kernel.org/r/20260313-rockchip-usbdp-cleanup-v3-0-3e8fe89a35b5@collabora.com
- rebased to v7.1-rc1 (no changes)
- Update DRM bridge registration patch to avoid registration when DP aux
port is not connected to anything, since this results in errors and some
boards use USBDP instances for USB3 only.
- Add patch renaming mode_change into phy_needs_reinit
- Add patch to re-init PHY on orientation change
- Add patch to factor out lane_mux_sel setup
- Add patch to handle mutex via guard functions
Changes in v3:
- Link to v2: https://lore.kernel.org/r/20260213-rockchip-usbdp-cleanup-v2-0-b67ec225f96e@collabora.com
- Add patch to register the USBDP PHY as DRM bridge
- Add patch to describe ports in DT binding (used by the DRM bridge)
- Add patch to drop HPD handling from the PHY
Changes in v2:
- Link to v1: https://lore.kernel.org/r/20260203-rockchip-usbdp-cleanup-v1-0-16a6f92ed176@collabora.com
- Added new patches to fix USB3 SError
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Frank Wang (1):
phy: rockchip: usbdp: Amend SSC modulation deviation
Sebastian Reichel (24):
dt-bindings: phy: rockchip-usbdp: add improved ports scheme
phy: rockchip: usbdp: Update mode_change after error handling
phy: rockchip: usbdp: Do not lose USB3 PHY status
phy: rockchip: usbdp: Fix devm_clk_bulk_get_all check
phy: rockchip: usbdp: Handle missing clock-names DT property gracefully
phy: rockchip: usbdp: Drop seamless DP takeover
phy: rockchip: usbdp: Handle rk_udphy_reset_deassert_all errors in init check
phy: rockchip: usbdp: Limit DP lane count to muxed lanes
phy: rockchip: usbdp: Keep clocks running on PHY re-init
phy: rockchip: usbdp: Add missing mode_change update
phy: rockchip: usbdp: Rename DP lane functions
phy: rockchip: usbdp: Use FIELD_PREP_WM16_CONST
phy: rockchip: usbdp: Cleanup DP lane selection function
phy: rockchip: usbdp: Register DP aux bridge
phy: rockchip: usbdp: Drop DP HPD handling
phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit
phy: rockchip: usbdp: Re-init the PHY on orientation change
phy: rockchip: usbdp: Factor out lane_mux_sel setup
phy: rockchip: usbdp: Properly handle TYPEC_STATE_SAFE and TYPEC_STATE_USB
phy: rockchip: usbdp: Use guard functions for mutex
phy: rockchip: usbdp: Support going from DP-only mode to USB mode
phy: rockchip: usbdp: Hold mutex in DP PHY configure
phy: rockchip: usbdp: Add some extra debug messages
phy: rockchip: usbdp: Avoid xHCI SErrors
William Wu (1):
phy: rockchip: usbdp: Fix LFPS detect threshold control
Zhang Yubing (1):
phy: rockchip: usbdp: Support single-lane DP
.../bindings/phy/phy-rockchip-usbdp.yaml | 23 ++
drivers/phy/rockchip/Kconfig | 2 +
drivers/phy/rockchip/phy-rockchip-usbdp.c | 396 ++++++++++-----------
3 files changed, 209 insertions(+), 212 deletions(-)
---
base-commit: ab9de95c9cf952332ab79453b4b5d1bfca8e514f
change-id: 20260203-rockchip-usbdp-cleanup-5b59dfb561a3
Best regards,
--
Sebastian Reichel <sebastian.reichel@collabora.com>
^ permalink raw reply
* [PATCH v7 05/27] phy: rockchip: usbdp: Handle missing clock-names DT property gracefully
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
The rk_udphy_clk_init() function would currently try to do a strncmp for
a NULL pointer, if DT specifies 'clocks' property, but no 'clock-names'
property. Fix this by making sure the clock has an id string set.
Note that DT binding requires setting clock-names, so this is only a
problem when booting a non-compliant device tree.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/message/20260619154349.071321F000E9%40smtp.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 2845a012eafc..3fc8222fcaec 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -432,6 +432,9 @@ static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev)
/* used for configure phy reference clock frequency */
for (i = 0; i < udphy->num_clks; i++) {
+ if (!udphy->clks[i].id)
+ continue;
+
if (!strncmp(udphy->clks[i].id, "refclk", 6)) {
udphy->refclk = udphy->clks[i].clk;
break;
--
2.53.0
^ permalink raw reply related
* [PATCH v7 06/27] phy: rockchip: usbdp: Drop seamless DP takeover
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
If the bootloader already enabled DP, keeping it enabled here means
the DRM stack can do a seamless takeover. Right now the DRM does not
support this and the code will leak clock resources on module removal,
so just drop this feature.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612164107.C7DB21F000E9@smtp.kernel.org/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 3fc8222fcaec..7fa3cd519577 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -939,9 +939,9 @@ static int rk_udphy_get_initial_status(struct rk_udphy *udphy)
regmap_read(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, &value);
if (FIELD_GET(CMN_DP_LANE_MUX_ALL, value) && FIELD_GET(CMN_DP_LANE_EN_ALL, value))
- udphy->status = UDPHY_MODE_DP;
- else
- rk_udphy_disable(udphy);
+ dev_dbg(udphy->dev, "Started with DP PHY pre-enabled; seamless takeover unsupported\n");
+
+ rk_udphy_disable(udphy);
return 0;
}
--
2.53.0
^ permalink raw reply related
* [PATCH v7 08/27] phy: rockchip: usbdp: Limit DP lane count to muxed lanes
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
In theory the DP controller could request 4 lanes when the PHY is
restricted to 2 lanes as the other half is used by USB3.
With the current user (DW-DP) this cannot happen, but as the check is
cheap and users might change in the future protect things accordingly.
Not doing so would corrupt USB3 usage by the following code configuring
the voltages.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612165546.98E1F1F000E9@smtp.kernel.org/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 121dd78d8c16..2324f9050f63 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1132,6 +1132,9 @@ static int rk_udphy_dp_phy_verify_link_rate(struct rk_udphy *udphy,
static int rk_udphy_dp_phy_verify_lanes(struct rk_udphy *udphy,
struct phy_configure_opts_dp *dp)
{
+ if (dp->lanes > udphy->dp_lanes)
+ return -EINVAL;
+
switch (dp->lanes) {
case 1:
case 2:
--
2.53.0
^ permalink raw reply related
* [PATCH v7 10/27] phy: rockchip: usbdp: Amend SSC modulation deviation
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
From: Frank Wang <frank.wang@rock-chips.com>
Move SSC modulation deviation into private config of clock
- 24M: 0x00d4[5:0] = 0x30
- 26M: 0x00d4[5:0] = 0x33
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
[Taken over from rockchip's kernel tree; register 0x00d4 is not
described in the TRM]
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 989a7884d8b5..93df673e181b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -350,7 +350,8 @@ static const struct reg_sequence rk_udphy_24m_refclk_cfg[] = {
{0x0a64, 0xa8}, {0x1a3c, 0xd0},
{0x1a44, 0xd0}, {0x1a48, 0x01},
{0x1a4c, 0x0d}, {0x1a54, 0xe0},
- {0x1a5c, 0xe0}, {0x1a64, 0xa8}
+ {0x1a5c, 0xe0}, {0x1a64, 0xa8},
+ {0x00d4, 0x30}
};
static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
@@ -377,7 +378,7 @@ static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
{0x0c30, 0x0e}, {0x0c48, 0x06},
{0x1c30, 0x0e}, {0x1c48, 0x06},
{0x028c, 0x18}, {0x0af0, 0x00},
- {0x1af0, 0x00}
+ {0x1af0, 0x00}, {0x00d4, 0x33}
};
static const struct reg_sequence rk_udphy_init_sequence[] = {
@@ -412,8 +413,7 @@ static const struct reg_sequence rk_udphy_init_sequence[] = {
{0x0070, 0x7d}, {0x0074, 0x68},
{0x0af4, 0x1a}, {0x1af4, 0x1a},
{0x0440, 0x3f}, {0x10d4, 0x08},
- {0x20d4, 0x08}, {0x00d4, 0x30},
- {0x0024, 0x6e},
+ {0x20d4, 0x08}, {0x0024, 0x6e}
};
static inline int rk_udphy_grfreg_write(struct regmap *base,
--
2.53.0
^ permalink raw reply related
* [PATCH v7 07/27] phy: rockchip: usbdp: Handle rk_udphy_reset_deassert_all errors in init check
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Fix theoretical issue, that failure to deassert the reset lines would
result in an SError in follow-up register access. Note, that this cannot
happen with current code, since the Rockchip reset driver never returns
any errors for (de)asserting reset lines.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/message/20260619154903.2225A1F000E9%40smtp.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 7fa3cd519577..121dd78d8c16 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -935,15 +935,18 @@ static int rk_udphy_get_initial_status(struct rk_udphy *udphy)
return ret;
}
- rk_udphy_reset_deassert_all(udphy);
+ ret = rk_udphy_reset_deassert_all(udphy);
+ if (ret)
+ goto exit;
regmap_read(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, &value);
if (FIELD_GET(CMN_DP_LANE_MUX_ALL, value) && FIELD_GET(CMN_DP_LANE_EN_ALL, value))
dev_dbg(udphy->dev, "Started with DP PHY pre-enabled; seamless takeover unsupported\n");
+exit:
rk_udphy_disable(udphy);
- return 0;
+ return ret;
}
static int rk_udphy_parse_dt(struct rk_udphy *udphy)
--
2.53.0
^ permalink raw reply related
* [PATCH v7 12/27] phy: rockchip: usbdp: Add missing mode_change update
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
rk_udphy_set_typec_default_mapping() updates the available modes,
but does not set the mode_change as required. This results in
missing re-initialization and thus non-working DisplayPort.
Fix this issue by introducing a new helper to update the available
modes.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 1067ddf2d742..f079715f7da2 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -622,6 +622,15 @@ static void rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd)
rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd);
}
+static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
+{
+ if (udphy->mode == mode)
+ return;
+
+ udphy->mode_change = true;
+ udphy->mode = mode;
+}
+
static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
{
if (udphy->flip) {
@@ -652,7 +661,7 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
}
- udphy->mode = UDPHY_MODE_DP_USB;
+ rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
}
static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -1394,10 +1403,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
usleep_range(750, 800);
rk_udphy_dp_hpd_event_trigger(udphy, true);
} else if (data->status & DP_STATUS_HPD_STATE) {
- if (udphy->mode != mode) {
- udphy->mode = mode;
- udphy->mode_change = true;
- }
+ rk_udphy_mode_set(udphy, mode);
rk_udphy_dp_hpd_event_trigger(udphy, true);
} else {
rk_udphy_dp_hpd_event_trigger(udphy, false);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 14/27] phy: rockchip: usbdp: Rename DP lane functions
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
The common prefix for DisplayPort related functions is rk_udphy_dp_
(with a final _), so update the two DP lane functions to follow that
scheme.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index e9e3f36f9e09..6ec9ab9d1e64 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -550,7 +550,7 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
* ---------------------------------------------------------------------------
*/
-static void rk_udphy_dplane_select(struct rk_udphy *udphy)
+static void rk_udphy_dp_lane_select(struct rk_udphy *udphy)
{
const struct rk_udphy_cfg *cfg = udphy->cfgs;
u32 value = 0;
@@ -579,7 +579,7 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
}
-static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
+static void rk_udphy_dp_lane_enable(struct rk_udphy *udphy, int dp_lanes)
{
u32 val = 0;
int i;
@@ -1079,9 +1079,9 @@ static int rk_udphy_dp_phy_power_on(struct phy *phy)
if (ret)
goto unlock;
- rk_udphy_dplane_enable(udphy, udphy->dp_lanes);
+ rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
- rk_udphy_dplane_select(udphy);
+ rk_udphy_dp_lane_select(udphy);
unlock:
mutex_unlock(&udphy->mutex);
@@ -1099,7 +1099,7 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy)
struct rk_udphy *udphy = phy_get_drvdata(phy);
mutex_lock(&udphy->mutex);
- rk_udphy_dplane_enable(udphy, 0);
+ rk_udphy_dp_lane_enable(udphy, 0);
rk_udphy_power_off(udphy, UDPHY_MODE_DP);
mutex_unlock(&udphy->mutex);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 13/27] phy: rockchip: usbdp: Support single-lane DP
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
From: Zhang Yubing <yubing.zhang@rock-chips.com>
Implement support for using just a single DisplayPort line.
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 64 +++++++++++++------------------
1 file changed, 27 insertions(+), 37 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index f079715f7da2..e9e3f36f9e09 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -193,6 +193,7 @@ struct rk_udphy {
int id;
bool dp_in_use;
+ int dp_lanes;
/* PHY const config */
const struct rk_udphy_cfg *cfgs;
@@ -540,6 +541,13 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
* <0 1> dpln0 dpln1 usbrx usbtx
* <2 3> usbrx usbtx dpln0 dpln1
* ---------------------------------------------------------------------------
+ * if 1 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = <x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ * B11-B10 A2-A3 A11-A10 B2-B3
+ * rockchip,dp-lane-mux ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx)
+ * <0> dpln0 \ usbrx usbtx
+ * ---------------------------------------------------------------------------
*/
static void rk_udphy_dplane_select(struct rk_udphy *udphy)
@@ -547,18 +555,18 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
const struct rk_udphy_cfg *cfg = udphy->cfgs;
u32 value = 0;
- switch (udphy->mode) {
- case UDPHY_MODE_DP:
- value |= 2 << udphy->dp_lane_sel[2] * 2;
+ switch (udphy->dp_lanes) {
+ case 4:
value |= 3 << udphy->dp_lane_sel[3] * 2;
+ value |= 2 << udphy->dp_lane_sel[2] * 2;
fallthrough;
- case UDPHY_MODE_DP_USB:
- value |= 0 << udphy->dp_lane_sel[0] * 2;
+ case 2:
value |= 1 << udphy->dp_lane_sel[1] * 2;
- break;
+ fallthrough;
- case UDPHY_MODE_USB:
+ case 1:
+ value |= 0 << udphy->dp_lane_sel[0] * 2;
break;
default:
@@ -571,28 +579,6 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
}
-static int rk_udphy_dplane_get(struct rk_udphy *udphy)
-{
- int dp_lanes;
-
- switch (udphy->mode) {
- case UDPHY_MODE_DP:
- dp_lanes = 4;
- break;
-
- case UDPHY_MODE_DP_USB:
- dp_lanes = 2;
- break;
-
- case UDPHY_MODE_USB:
- default:
- dp_lanes = 0;
- break;
- }
-
- return dp_lanes;
-}
-
static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
{
u32 val = 0;
@@ -662,6 +648,7 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
}
rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
+ udphy->dp_lanes = 2;
}
static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -900,7 +887,7 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
return 0;
}
- if (num_lanes != 2 && num_lanes != 4)
+ if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4)
return dev_err_probe(udphy->dev, -EINVAL,
"invalid number of lane mux\n");
@@ -926,9 +913,11 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
}
udphy->mode = UDPHY_MODE_DP;
- if (num_lanes == 2) {
+ udphy->dp_lanes = num_lanes;
+ if (num_lanes == 1 || num_lanes == 2) {
udphy->mode |= UDPHY_MODE_USB;
- udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP);
+ udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP) ||
+ (udphy->lane_mux_sel[1] == PHY_LANE_MUX_DP);
}
return 0;
@@ -1080,18 +1069,17 @@ static int rk_udphy_dp_phy_exit(struct phy *phy)
static int rk_udphy_dp_phy_power_on(struct phy *phy)
{
struct rk_udphy *udphy = phy_get_drvdata(phy);
- int ret, dp_lanes;
+ int ret;
mutex_lock(&udphy->mutex);
- dp_lanes = rk_udphy_dplane_get(udphy);
- phy_set_bus_width(phy, dp_lanes);
+ phy_set_bus_width(phy, udphy->dp_lanes);
ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
if (ret)
goto unlock;
- rk_udphy_dplane_enable(udphy, dp_lanes);
+ rk_udphy_dplane_enable(udphy, udphy->dp_lanes);
rk_udphy_dplane_select(udphy);
@@ -1374,6 +1362,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
mode = UDPHY_MODE_DP;
+ udphy->dp_lanes = 4;
break;
case TYPEC_DP_STATE_D:
@@ -1390,6 +1379,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
}
mode = UDPHY_MODE_DP_USB;
+ udphy->dp_lanes = 2;
break;
}
@@ -1538,7 +1528,7 @@ static int rk_udphy_probe(struct platform_device *pdev)
ret = PTR_ERR(udphy->phy_dp);
return dev_err_probe(dev, ret, "failed to create DP phy\n");
}
- phy_set_bus_width(udphy->phy_dp, rk_udphy_dplane_get(udphy));
+ phy_set_bus_width(udphy->phy_dp, udphy->dp_lanes);
udphy->phy_dp->attrs.max_link_rate = 8100;
phy_set_drvdata(udphy->phy_dp, udphy);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 15/27] phy: rockchip: usbdp: Use FIELD_PREP_WM16_CONST
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Cleanup code by replacing open-coded version of FIELD_PREP_WM16_CONST
with the existing helper macro.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 6ec9ab9d1e64..1bae8172d1fe 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/hw_bitfield.h>
#include <linux/mfd/syscon.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
@@ -75,7 +76,6 @@
#define TRSV_LN2_MON_RX_CDR_DONE_OFFSET 0x1b84 /* trsv_reg06E1 */
#define TRSV_LN2_MON_RX_CDR_LOCK_DONE BIT(0)
-#define BIT_WRITEABLE_SHIFT 16
#define PHY_AUX_DP_DATA_POL_NORMAL 0
#define PHY_AUX_DP_DATA_POL_INVERT 1
#define PHY_LANE_MUX_USB 0
@@ -104,8 +104,8 @@ struct rk_udphy_grf_reg {
#define _RK_UDPHY_GEN_GRF_REG(offset, mask, disable, enable) \
{\
offset, \
- FIELD_PREP_CONST(mask, disable) | (mask << BIT_WRITEABLE_SHIFT), \
- FIELD_PREP_CONST(mask, enable) | (mask << BIT_WRITEABLE_SHIFT), \
+ FIELD_PREP_WM16_CONST(mask, disable), \
+ FIELD_PREP_WM16_CONST(mask, enable), \
}
#define RK_UDPHY_GEN_GRF_REG(offset, bitend, bitstart, disable, enable) \
--
2.53.0
^ permalink raw reply related
* [PATCH v7 11/27] phy: rockchip: usbdp: Fix LFPS detect threshold control
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, William Wu
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
From: William Wu <william.wu@rock-chips.com>
According to the LFPS Tx Low Power/LFPS Rx Detect Threshold [1],
the device under test(DUT) must not respond if LFPS below the
minimum LFPS Rx Detect Threshold 100mV. Test fail on Rockchip
platforms, because the default LFPS detect threshold is set to
65mV.
The USBDP PHY LFPS detect threshold voltage could be set to
30mV ~ 140mV, and since there could be 10-20% PVT variation,
we set LFPS detect threshold voltage to 110mV.
[1] https://compliance.usb.org/resources/LFPS_Rx_Tx_Low_Power_Compliance_Update_Rev5.pdf
Signed-off-by: William Wu <william.wu@rock-chips.com>
[Taken over from rockchip's kernel tree; the registers are not described
in the TRM]
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 93df673e181b..1067ddf2d742 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -413,7 +413,8 @@ static const struct reg_sequence rk_udphy_init_sequence[] = {
{0x0070, 0x7d}, {0x0074, 0x68},
{0x0af4, 0x1a}, {0x1af4, 0x1a},
{0x0440, 0x3f}, {0x10d4, 0x08},
- {0x20d4, 0x08}, {0x0024, 0x6e}
+ {0x20d4, 0x08}, {0x0024, 0x6e},
+ {0x09c0, 0x0a}, {0x19c0, 0x0a}
};
static inline int rk_udphy_grfreg_write(struct regmap *base,
--
2.53.0
^ permalink raw reply related
* [PATCH v7 19/27] phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Right now the mode_change property is set whenever the mode changes
between USB-only, DP-only and USB-DP. It is needed, because on any
mode change the PHY needs to be re-initialized. Apparently at least
DP also requires a re-init when the cable orientation is changed,
which is currently not being done (except when the orientation switch
also involves a mode change). Prepare for this by renaming mode_change
to phy_needs_reinit.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 8b5b188fd121..b08f0c142b0d 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -171,7 +171,7 @@ struct rk_udphy {
/* PHY status management */
bool flip;
- bool mode_change;
+ bool phy_needs_reinit;
u8 mode;
u8 status;
@@ -583,7 +583,7 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
if (udphy->mode == mode)
return;
- udphy->mode_change = true;
+ udphy->phy_needs_reinit = true;
udphy->mode = mode;
}
@@ -981,15 +981,15 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
if (udphy->mode & UDPHY_MODE_USB)
rk_udphy_u3_port_disable(udphy, false);
- udphy->mode_change = false;
- } else if (udphy->mode_change) {
+ udphy->phy_needs_reinit = false;
+ } else if (udphy->phy_needs_reinit) {
if (udphy->mode == UDPHY_MODE_DP)
rk_udphy_u3_port_disable(udphy, true);
ret = rk_udphy_init(udphy);
if (ret)
return ret;
- udphy->mode_change = false;
+ udphy->phy_needs_reinit = false;
}
udphy->status |= mode;
--
2.53.0
^ permalink raw reply related
* [PATCH v7 20/27] phy: rockchip: usbdp: Re-init the PHY on orientation change
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Changing the cable orientation reconfigures the lane muxing, which
requires re-initializing the PHY. Without this DP functionality
breaks, if the cable is re-plugged with swapped orientation.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index b08f0c142b0d..3fa97a8c2555 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -625,6 +625,7 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
enum typec_orientation orien)
{
struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
+ bool flipped = orien == TYPEC_ORIENTATION_REVERSE;
mutex_lock(&udphy->mutex);
@@ -636,7 +637,10 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
goto unlock_ret;
}
- udphy->flip = orien == TYPEC_ORIENTATION_REVERSE;
+ if (udphy->flip != flipped)
+ udphy->phy_needs_reinit = true;
+
+ udphy->flip = flipped;
rk_udphy_set_typec_default_mapping(udphy);
rk_udphy_usb_bvalid_enable(udphy, true);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 09/27] phy: rockchip: usbdp: Keep clocks running on PHY re-init
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
When a mode change is required rk_udphy_power_on() disables
the clocks and then calls rk_udphy_setup(), which then enables
all the clocks again before continuing with rk_udphy_init().
Considering that rk_udphy_init() does assert the reset lines,
re-enabling the clocks is just delaying things. Avoid it by
directly calling rk_udphy_init().
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 2324f9050f63..989a7884d8b5 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1017,8 +1017,7 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
if (udphy->mode == UDPHY_MODE_DP)
rk_udphy_u3_port_disable(udphy, true);
- rk_udphy_disable(udphy);
- ret = rk_udphy_setup(udphy);
+ ret = rk_udphy_init(udphy);
if (ret)
return ret;
udphy->mode_change = false;
--
2.53.0
^ permalink raw reply related
* [PATCH v7 22/27] phy: rockchip: usbdp: Properly handle TYPEC_STATE_SAFE and TYPEC_STATE_USB
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Handle TYPEC_STATE_SAFE and TYPEC_STATE_USB Type-C state events,
so that the muxing is properly updated when exiting DP AltMode.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/message/20260619155020.CC7361F000E9%40smtp.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 0bcaf54c5645..0119b6229b0a 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1329,11 +1329,12 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
/*
- * Ignore mux events not involving DP AltMode, because
- * the mode field is being reused, e.g. state->mode == 4
- * could be either TYPEC_MODE_USB4 or TYPEC_DP_STATE_C.
+ * Ignore mux events not involving Safe State, USB State or DP AltMode,
+ * because the mode field is being reused, e.g. state->mode == 4 could
+ * be either TYPEC_MODE_USB4 or TYPEC_DP_STATE_C.
*/
- if (!state->alt || state->alt->svid != USB_TYPEC_DP_SID)
+ if (state->mode >= TYPEC_STATE_MODAL || !state->alt ||
+ state->alt->svid != USB_TYPEC_DP_SID)
return 0;
mutex_lock(&udphy->mutex);
--
2.53.0
^ permalink raw reply related
* [PATCH v7 25/27] phy: rockchip: usbdp: Hold mutex in DP PHY configure
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel, Sashiko
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
rk_udphy_dp_phy_configure() accesses some variables from the struct
rk_udphy, which are updated independently from the USB-C framework.
The USB-C mux/orientation switch functions already hold a mutex to
ensure mutual exclusive access to the struct rk_udphy states, so
simply hold the same one in the DP PHY configuration function.
Reproducing problems due to this on real hardware would be really hard,
but could be possible when quickly re-connecting the USB-C connector.
Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612164627.23D391F000E9@smtp.kernel.org/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 182141837596..fc788f2bf5fb 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1189,6 +1189,8 @@ static int rk_udphy_dp_phy_configure(struct phy *phy,
u32 i, val, lane;
int ret;
+ guard(mutex)(&udphy->mutex);
+
if (dp->set_rate) {
ret = rk_udphy_dp_phy_verify_link_rate(udphy, dp);
if (ret)
--
2.53.0
^ permalink raw reply related
* [PATCH v7 24/27] phy: rockchip: usbdp: Support going from DP-only mode to USB mode
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
When a USB-C adapter, which maps all Superspeed lanes to DP is plugged
in, the USB support is disabled in the PHY. When the adapter is
unplugged and a different adapter with USB functionality is plugged in
afterwards, USB functionality is not restored as the USB controller
keeps the PHY enabled for the entire time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 6f3184011e5f..182141837596 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -178,6 +178,7 @@ struct rk_udphy {
/* utilized for USB */
bool hs; /* flag for high-speed */
+ bool usb_in_use;
/* utilized for DP */
struct gpio_desc *sbu1_dc_gpio;
@@ -1021,6 +1022,10 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
ret = rk_udphy_init(udphy);
if (ret)
return ret;
+
+ if (udphy->mode & UDPHY_MODE_USB)
+ rk_udphy_u3_port_disable(udphy, false);
+
udphy->phy_needs_reinit = false;
}
@@ -1284,6 +1289,7 @@ static const struct phy_ops rk_udphy_dp_phy_ops = {
static int rk_udphy_usb3_phy_init(struct phy *phy)
{
struct rk_udphy *udphy = phy_get_drvdata(phy);
+ int ret;
guard(mutex)(&udphy->mutex);
@@ -1293,7 +1299,13 @@ static int rk_udphy_usb3_phy_init(struct phy *phy)
return 0;
}
- return rk_udphy_power_on(udphy, UDPHY_MODE_USB);
+ ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB);
+ if (ret)
+ return ret;
+
+ udphy->usb_in_use = true;
+
+ return 0;
}
static int rk_udphy_usb3_phy_exit(struct phy *phy)
@@ -1302,6 +1314,8 @@ static int rk_udphy_usb3_phy_exit(struct phy *phy)
guard(mutex)(&udphy->mutex);
+ udphy->usb_in_use = false;
+
/* DP only or high-speed */
if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs)
return 0;
@@ -1321,6 +1335,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
struct typec_mux_state *state)
{
struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
+ u8 old_mode;
/*
* Ignore mux events not involving Safe State, USB State or DP AltMode,
@@ -1333,8 +1348,20 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
guard(mutex)(&udphy->mutex);
+ old_mode = udphy->mode;
+
rk_udphy_set_typec_state(udphy, state->mode);
+ /*
+ * If the new mode includes USB but the old one didn't (e.g. leaving
+ * DP-only), and the USB PHY was already initialized by the USB
+ * controller, we need to power on the USB side now since no
+ * subsequent phy_init call will come from the controller.
+ */
+ if ((udphy->mode & UDPHY_MODE_USB) && !(old_mode & UDPHY_MODE_USB) &&
+ udphy->usb_in_use && !udphy->hs)
+ return rk_udphy_power_on(udphy, UDPHY_MODE_USB);
+
return 0;
}
--
2.53.0
^ permalink raw reply related
* RE: [RFC PATCH 2/6] firmware: smccc: Detect hypervisor via RSI host call in CCA Realms
From: Kameron Carr @ 2026-06-25 17:42 UTC (permalink / raw)
To: 'Michael Kelley'
Cc: catalin.marinas, will, mark.rutland, lpieralisi, sudeep.holla,
arnd, thuth, linux-hyperv, linux-arm-kernel, linux-kernel,
linux-arch, kys, haiyangz, wei.liu, decui, longli
In-Reply-To: <SN6PR02MB4157F6A66DEDE650298E120ED4E32@SN6PR02MB4157.namprd02.prod.outlook.com>
On Thursday, June 18, 2026 10:46 AM, Michael Kelley wrote:
> From: Kameron Carr <kameroncarr@linux.microsoft.com> Sent: Tuesday, June
> 9, 2026 11:10 AM
> > diff --git a/drivers/firmware/smccc/smccc.c
> b/drivers/firmware/smccc/smccc.c
> > index bdee057db2fd3..6b465e65472b0 100644
> > --- a/drivers/firmware/smccc/smccc.c
> > +++ b/drivers/firmware/smccc/smccc.c
> > @@ -12,6 +12,12 @@
> > #include <linux/platform_device.h>
> > #include <asm/archrandom.h>
> >
> > +#ifdef CONFIG_ARM64
> > +#include <linux/cleanup.h>
> > +#include <linux/spinlock.h>
> > +#include <asm/rsi.h>
> > +#endif
> > +
> > static u32 smccc_version = ARM_SMCCC_VERSION_1_0;
> > static enum arm_smccc_conduit smccc_conduit = SMCCC_CONDUIT_NONE;
> >
> > @@ -67,12 +73,45 @@ s32 arm_smccc_get_soc_id_revision(void)
> > }
> > EXPORT_SYMBOL_GPL(arm_smccc_get_soc_id_revision);
> >
> > +#ifdef CONFIG_ARM64
> > +static struct rsi_host_call uuid_hc;
> > +static DEFINE_SPINLOCK(uuid_hc_lock);
>
> So evidently Sashiko is wrong in saying that struct rsi_host_call must be
> in decrypted memory?
Yes, Sashiko is wrong. The RMM spec clearly states that the rsi_host_call
struct must be encrypted / "protected". The other two requirements are
256 aligned and not RIPAS_EMPTY.
^ permalink raw reply
* RE: [RFC PATCH 1/6] arm64: rsi: Add RSI host call structure and helper function
From: Kameron Carr @ 2026-06-25 17:44 UTC (permalink / raw)
To: 'Michael Kelley'
Cc: catalin.marinas, will, mark.rutland, lpieralisi, sudeep.holla,
arnd, thuth, linux-hyperv, linux-arm-kernel, linux-kernel,
linux-arch, kys, haiyangz, wei.liu, decui, longli
In-Reply-To: <SN6PR02MB4157C9AA6BA2DD14E7697F2BD4E32@SN6PR02MB4157.namprd02.prod.outlook.com>
On Thursday, June 18, 2026 10:46 AM, Michael Kelley wrote:
> From: Kameron Carr <kameroncarr@linux.microsoft.com> Sent: Tuesday, June
> 9, 2026 11:10 AM
> > diff --git a/arch/arm64/include/asm/rsi_smc.h
> b/arch/arm64/include/asm/rsi_smc.h
> > index e19253f96c940..ffea93340ed7f 100644
> > --- a/arch/arm64/include/asm/rsi_smc.h
> > +++ b/arch/arm64/include/asm/rsi_smc.h
> > @@ -142,6 +142,12 @@ struct realm_config {
> > */
> > } __aligned(0x1000);
> >
> > +struct rsi_host_call {
> > + u16 immediate;
>
> I don't see the "immediate" used anywhere in this patch set.
> Is it always zero for the Hyper-V use cases? Just curious ...
Yes, the immediate value is always zero for Hyper-V host calls.
-- Kameron
^ permalink raw reply
* [PATCH v7 21/27] phy: rockchip: usbdp: Factor out lane_mux_sel setup
From: Sebastian Reichel @ 2026-06-25 17:39 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Frank Wang,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Andy Yan, Dmitry Baryshkov, Yubing Zhang, Alexey Charkov,
linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel, kernel,
devicetree, Sebastian Reichel
In-Reply-To: <20260625-rockchip-usbdp-cleanup-v7-0-38eb3cf654fd@collabora.com>
Avoid describing the USB+DP lane_mux_sel logic twice by introducing
a helper function to reduce code duplication.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 81 +++++++++++++++----------------
1 file changed, 40 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 3fa97a8c2555..0bcaf54c5645 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -587,6 +587,42 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
udphy->mode = mode;
}
+static void rk_udphy_set_typec_state(struct rk_udphy *udphy, unsigned long state)
+{
+ u8 mode;
+
+ switch (state) {
+ case TYPEC_DP_STATE_C:
+ case TYPEC_DP_STATE_E:
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ mode = UDPHY_MODE_DP;
+ udphy->dp_lanes = 4;
+ break;
+
+ case TYPEC_DP_STATE_D:
+ default:
+ if (udphy->flip) {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+ } else {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ }
+ mode = UDPHY_MODE_DP_USB;
+ udphy->dp_lanes = 2;
+ break;
+ }
+
+ rk_udphy_mode_set(udphy, mode);
+}
+
static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
{
if (udphy->flip) {
@@ -594,10 +630,6 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
udphy->dp_lane_sel[1] = 1;
udphy->dp_lane_sel[2] = 3;
udphy->dp_lane_sel[3] = 2;
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT;
udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT;
gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1);
@@ -607,18 +639,14 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
udphy->dp_lane_sel[1] = 3;
udphy->dp_lane_sel[2] = 1;
udphy->dp_lane_sel[3] = 0;
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL;
udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL;
gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
}
- rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
- udphy->dp_lanes = 2;
+ /* default to USB3 + DP as 4 lane USB is not supported */
+ rk_udphy_set_typec_state(udphy, TYPEC_DP_STATE_D);
}
static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -1299,7 +1327,6 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
struct typec_mux_state *state)
{
struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
- u8 mode;
/*
* Ignore mux events not involving DP AltMode, because
@@ -1311,38 +1338,10 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
mutex_lock(&udphy->mutex);
- switch (state->mode) {
- case TYPEC_DP_STATE_C:
- case TYPEC_DP_STATE_E:
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
- mode = UDPHY_MODE_DP;
- udphy->dp_lanes = 4;
- break;
-
- case TYPEC_DP_STATE_D:
- default:
- if (udphy->flip) {
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
- } else {
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
- }
- mode = UDPHY_MODE_DP_USB;
- udphy->dp_lanes = 2;
- break;
- }
-
- rk_udphy_mode_set(udphy, mode);
+ rk_udphy_set_typec_state(udphy, state->mode);
mutex_unlock(&udphy->mutex);
+
return 0;
}
--
2.53.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox