[PATCH] regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage

[myungjoo.ham@gmail.com (MyungJoo Ham)]

Please ignore this one. I'm sending again with CCs omitted here.
Sorry for duplicated mails.

On Fri, Jul 16, 2010 at 4:46 PM, MyungJoo Ham <myungjoo.ham@samsung.com> wrote:
> Two issues are addressed for max8998_set_voltage function.
>
> 1. Min/Max Voltage.
>
> ? ? ? ?max8998_set_voltage had been using the voltage value of
>
> ? ? ? ?min ( voltage[i] >= max_vol , i )
>
> ? ? ? ?This is corrected to use:
>
> ? ? ? ?min ( voltage[i] >= min_vol , i )
>
> 2. Ramp Up Delay.
>
> ? ? ? ?max8998_set_voltage should provide delay for BUCK1/2
> if ENRAMP is on. It reads RAMP value from ONOFF4 register to determine
> RAMP delay length. However, when max8998_set_voltage's new voltage is
> lower than the previous, we don't care because it does not deteriorate
> the stability.
>
> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> ?drivers/regulator/max8998.c | ? 30 ++++++++++++++++++++++++++++--
> ?1 files changed, 28 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
> index 1cca8b5..99c5279 100644
> --- a/drivers/regulator/max8998.c
> +++ b/drivers/regulator/max8998.c
> @@ -28,6 +28,7 @@
> ?#include <linux/slab.h>
> ?#include <linux/interrupt.h>
> ?#include <linux/mutex.h>
> +#include <linux/delay.h>
> ?#include <linux/platform_device.h>
> ?#include <linux/regulator/driver.h>
> ?#include <linux/mfd/max8998.h>
> @@ -302,10 +303,13 @@ static int max8998_set_voltage(struct regulator_dev *rdev,
> ? ? ? ?struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> ? ? ? ?struct i2c_client *i2c = max8998->iodev->i2c;
> ? ? ? ?int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
> + ? ? ? int previous_vol = 0;
> ? ? ? ?const struct voltage_map_desc *desc;
> ? ? ? ?int ldo = max8998_get_ldo(rdev);
> ? ? ? ?int reg, shift = 0, mask, ret;
> ? ? ? ?int i = 0;
> + ? ? ? u8 val;
> + ? ? ? bool en_ramp = false;
>
> ? ? ? ?if (ldo > ARRAY_SIZE(ldo_voltage_map))
> ? ? ? ? ? ? ? ?return -EINVAL;
> @@ -317,15 +321,37 @@ static int max8998_set_voltage(struct regulator_dev *rdev,
> ? ? ? ?if (max_vol < desc->min || min_vol > desc->max)
> ? ? ? ? ? ? ? ?return -EINVAL;
>
> - ? ? ? while (desc->min + desc->step*i < max_vol &&
> + ? ? ? while (desc->min + desc->step*i < min_vol &&
> ? ? ? ? ? ? ? desc->min + desc->step*i < desc->max)
> ? ? ? ? ? ? ? ?i++;
>
> + ? ? ? if (desc->min + desc->step*i > max_vol)
> + ? ? ? ? ? ? ? return -EINVAL;
> +
> ? ? ? ?ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
> ? ? ? ?if (ret)
> ? ? ? ? ? ? ? ?return ret;
>
> - ? ? ? return max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
> + ? ? ? /* wait for RAMP_UP_DELAY if rdev is BUCK1/2 and
> + ? ? ? ?* ENRAMP is ON */
> + ? ? ? if (ldo == MAX8998_BUCK1 || ldo == MAX8998_BUCK2) {
> + ? ? ? ? ? ? ? max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
> + ? ? ? ? ? ? ? if (val & (1 << 4)) {
> + ? ? ? ? ? ? ? ? ? ? ? en_ramp = true;
> + ? ? ? ? ? ? ? ? ? ? ? previous_vol = max8998_get_voltage(rdev);
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
> +
> + ? ? ? if (en_ramp == true) {
> + ? ? ? ? ? ? ? int difference = desc->min + desc->step * i
> + ? ? ? ? ? ? ? ? ? ? ? - previous_vol / 1000;
> + ? ? ? ? ? ? ? if (difference > 0)
> + ? ? ? ? ? ? ? ? ? ? ? udelay(difference / ((val & 0x0f) + 1));
> + ? ? ? }
> +
> + ? ? ? return ret;
> ?}
>
> ?static struct regulator_ops max8998_ldo_ops = {
> --
> 1.6.3.3
>
>



-- 
MyungJoo Ham (???), Ph.D.
Mobile Software Platform Lab,
Digital Media and Communications (DMC) Business
Samsung Electronics
cell: 82-10-6714-2858