From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric.y.miao@gmail.com (Eric Miao) Date: Thu, 1 Jul 2010 12:27:38 +0800 Subject: [PATCH 24/33] Removing dead ARCH_GUMSTIX_ORIG In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Jul 1, 2010 at 12:01 AM, Christoph Egger wrote: > ARCH_GUMSTIX_ORIG doesn't exist in Kconfig, therefore removing all > references for it from the source code. > > Signed-off-by: Christoph Egger Acked-by: Eric Miao Cc'ed Jaya Kumar for additional thoughts. > --- > ?arch/arm/mach-pxa/include/mach/gumstix.h | ? 12 +----------- > ?1 files changed, 1 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h > index 06abd41..9b89868 100644 > --- a/arch/arm/mach-pxa/include/mach/gumstix.h > +++ b/arch/arm/mach-pxa/include/mach/gumstix.h > @@ -14,25 +14,15 @@ > > ?/* > ?GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean > -interrupt signal for determining cable presence. On the original gumstix, > -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, > +interrupt signal for determining cable presence. On the gumstix F, > ?this moves to GPIO17 and GPIO37. */ > > ?/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn > ?has detected a cable insertion; driven low otherwise. */ > > -#ifdef CONFIG_ARCH_GUMSTIX_ORIG > - > -#define GPIO_GUMSTIX_USB_GPIOn ? ? ? ? 81 > -#define GPIO_GUMSTIX_USB_GPIOx ? ? ? ? 83 > - > -#else > - > ?#define GPIO_GUMSTIX_USB_GPIOn ? ? ? ? 35 > ?#define GPIO_GUMSTIX_USB_GPIOx ? ? ? ? 41 > > -#endif > - > ?/* usb state change */ > ?#define GUMSTIX_USB_INTR_IRQ ? ? ? ? ? IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) > > -- > 1.7.0.4 > >