linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: san.mlists@gmail.com (Santhosh N)
To: linux-arm-kernel@lists.infradead.org
Subject: PXA270 audio problem
Date: Thu, 23 Sep 2010 12:35:22 +0530	[thread overview]
Message-ID: <AANLkTimRPZijUXcecbBSexuthttJ76-NYVbs0cc3iyZm@mail.gmail.com> (raw)
In-Reply-To: <AANLkTimOM7EnMgfDVqZ-Oq_cLOUwR-GeKEwDD9HsLqQa@mail.gmail.com>

Hi,

Following are the AC97 and DMA register dumps. I am printing out the
DMA registers from the pxa2xx_pcm_trigger function.

I have noticed that, the touchscreen and audio record continues to
work after the problem. In the problem state, the DMA interrupts occur
for audio record but not for playback.

AC97:
BeforeProblem			AfterProblem
0:00 = 02a0			0:00 = 02a0
0:02 = 0d0d			0:02 = 0d0d
0:04 = 0000			0:04 = 0000
0:06 = 0000			0:06 = 0000
0:08 = 0000			0:08 = 0000
0:0a = 0000			0:0a = 0000
0:0c = 0000			0:0c = 0000
0:0e = 0000			0:0e = 0000
0:10 = 0000			0:10 = 0000
0:12 = 0000			0:12 = 0000
0:14 = 0000			0:14 = 0000
0:16 = 0000			0:16 = 0000
0:18 = 0000			0:18 = 0000
0:1a = 0000			0:1a = 0000
0:1c = 0000			0:1c = 0000
0:1e = 0000			0:1e = 0000
0:20 = 0000			0:20 = 0000
0:22 = 0000			0:22 = 0000
0:24 = 0000			0:24 = 0000
0:26 = 000b			0:26 = 000b
0:28 = 0001			0:28 = 0001
0:2a = 0001			0:2a = 0001
0:2c = 5622			0:2c = 3e80
0:2e = 0000			0:2e = 0000
0:30 = 0000			0:30 = 0000
0:32 = bb80			0:32 = bb80
0:34 = 0000			0:34 = 0000
0:36 = 0000			0:36 = 0000
0:38 = 0000			0:38 = 0000
0:3a = 0000			0:3a = 0000
0:3c = 0000			0:3c = 0000
0:3e = 0000			0:3e = 0000
0:40 = 0000			0:40 = 0000
0:42 = 0000			0:42 = 0000
0:44 = 0000			0:44 = 0000
0:46 = 0000			0:46 = 0000
0:48 = 0000			0:48 = 0000
0:4a = 0000			0:4a = 0000
0:4c = 0000			0:4c = 0000
0:4e = 0000			0:4e = 0000
0:50 = 0000			0:50 = 0000
0:52 = 0000			0:52 = 0000
0:54 = 0000			0:54 = 0000
0:56 = 0000			0:56 = 0000
0:58 = 0000			0:58 = 0000
0:5a = 0000			0:5a = 0000
0:5c = 0000			0:5c = 0000
0:5e = 0000			0:5e = 0000
0:60 = 0000			0:60 = 0000
0:62 = 0000			0:62 = 0000
0:64 = 0948			0:64 = 0948
0:66 = 0000			0:66 = 0000
0:68 = 824b			0:68 = 824b
0:6a = 0050			0:6a = 0050
0:6c = 0030			0:6c = 0030
0:6e = 2004			0:6e = 2004
0:70 = 0000			0:70 = 0000
0:72 = 0000			0:72 = 0000
0:74 = 0000			0:74 = 0000
0:76 = 0000			0:76 = 0000
0:78 = 0000			0:78 = 0000
0:7a = 0000			0:7a = 0000
0:7c = 5053			0:7c = 5053
0:7e = 4304			0:7e = 4304

Only diff in the above is in the 02C(Audio sample rate control) register.

DMA:
BeforeProblem
::: DMA Channel: 8, Trigger Start
DDADR = 0xB714A010
DSADR = 0xB7100040
DTADR = 0x40500040
DCMD  = 0x9023CFC0
DCSR  = 0x80000000
::: DMA Channel: 8, Trigger Stop
DDADR = 0xB714A0E0
DSADR = 0xB710D000
DTADR = 0x40500040
DCMD  = 0x9023D000
DCSR  = 0x00000008


AfterProblem
::: DMA Channel: 8, Trigger Start
DDADR = 0xB70B7010
DSADR = 0xB7100000
DTADR = 0x40500040
DCMD  = 0x9023D000
DCSR  = 0x80000000
ALSA sound/core/pcm_native.c:1512: playback drain error (DMA or IRQ trouble?)
::: DMA Channel: 8, Trigger Stop
DDADR = 0xB70B7010
DSADR = 0xB7100000
DTADR = 0x40500040
DCMD  = 0x9023D000
DCSR  = 0x00000008

Each dump above is after playing a mp3 file using madplay.

Regards,
Santhosh N

On Thu, Sep 23, 2010 at 11:38 AM, Eric Miao <eric.y.miao@gmail.com> wrote:
> On Thu, Sep 23, 2010 at 1:33 PM, Santhosh N <san.mlists@gmail.com> wrote:
>> Dear All,
>>
>> I am running linux 2.6.26 kernel on a PXA270 board. A UCB1400 chip
>> used for audio and touchscreen in that. I have been facing a problem
>> with audio.
>>
>> The audio plays properly, but suddenly stops. I get the following message:
>> ALSA sound/core/pcm_native.c:1513: playback drain error (DMA or IRQ trouble?)
>>
>> I have noticed that the DMA interrupts stop coming. Where as the AC97
>> interrupts come properly.
>>
>> Any help in solving this will be grateful.
>>
>
> Dumping the DMA registers and the AC97 controller registers would
> be helpful.
>
>> Regards,
>> Santhosh N
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>

  reply	other threads:[~2010-09-23  7:05 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-23  5:33 PXA270 audio problem Santhosh N
2010-09-23  6:08 ` Eric Miao
2010-09-23  7:05   ` Santhosh N [this message]
2010-09-23  7:24     ` Santhosh N
2010-09-24 11:35       ` Marek Vasut
2010-10-10 14:25         ` Santhosh N

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AANLkTimRPZijUXcecbBSexuthttJ76-NYVbs0cc3iyZm@mail.gmail.com \
    --to=san.mlists@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).