From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric.y.miao@gmail.com (Eric Miao) Date: Mon, 20 Sep 2010 22:16:54 +0800 Subject: [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support In-Reply-To: <1284604382-23683-2-git-send-email-marek.vasut@gmail.com> References: <1284604382-23683-1-git-send-email-marek.vasut@gmail.com> <1284604382-23683-2-git-send-email-marek.vasut@gmail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Sep 16, 2010 at 10:32 AM, Marek Vasut wrote: > This driver also contains structures to eventually support PXA320. This is > planned to be added in a later patch. > > Signed-off-by: Marek Vasut > Acked-by: Daniel Mack > --- > ?arch/arm/mach-pxa/colibri-pxa270-evalboard.c | ? 18 ++ > ?drivers/pcmcia/Kconfig ? ? ? ? ? ? ? ? ? ? ? | ? ?2 +- > ?drivers/pcmcia/Makefile ? ? ? ? ? ? ? ? ? ? ?| ? ?1 + > ?drivers/pcmcia/pxa2xx_colibri.c ? ? ? ? ? ? ?| ?214 ++++++++++++++++++++++++++ > ?4 files changed, 234 insertions(+), 1 deletions(-) > ?create mode 100644 drivers/pcmcia/pxa2xx_colibri.c > > diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c > index 0f3b632..6177ff5 100644 > --- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c > +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c > @@ -51,6 +51,24 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = { > ? ? ? ?GPIO89_USBH1_PEN, > ? ? ? ?GPIO119_USBH2_PWR, > ? ? ? ?GPIO120_USBH2_PEN, > + > + ? ? ? /* PCMCIA */ > + ? ? ? GPIO85_nPCE_1, > + ? ? ? GPIO54_nPCE_2, > + ? ? ? GPIO55_nPREG, > + ? ? ? GPIO50_nPIOR, > + ? ? ? GPIO51_nPIOW, > + ? ? ? GPIO49_nPWE, > + ? ? ? GPIO48_nPOE, > + ? ? ? GPIO57_nIOIS16, > + ? ? ? GPIO56_nPWAIT, > + ? ? ? GPIO104_PSKTSEL, > + ? ? ? GPIO53_GPIO, ? ?/* RESET */ > + ? ? ? GPIO83_GPIO, ? ?/* BVD1 */ > + ? ? ? GPIO82_GPIO, ? ?/* BVD2 */ > + ? ? ? GPIO1_GPIO, ? ? /* READY */ > + ? ? ? GPIO84_GPIO, ? ?/* DETECT */ > + ? ? ? GPIO107_GPIO, ? /* PPEN */ > ?}; > > ?/****************************************************************************** > diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig > index c80a7a6..e9acf03 100644 > --- a/drivers/pcmcia/Kconfig > +++ b/drivers/pcmcia/Kconfig > @@ -215,7 +215,7 @@ config PCMCIA_PXA2XX > ? ? ? ?depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ > ? ? ? ? ? ? ? ? ? ?|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ > ? ? ? ? ? ? ? ? ? ?|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ > - ? ? ? ? ? ? ? ? ? || MACH_VPAC270 || MACH_BALLOON3) > + ? ? ? ? ? ? ? ? ? || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI) > ? ? ? ?select PCMCIA_SOC_COMMON > ? ? ? ?help > ? ? ? ? ?Say Y here to include support for the PXA2xx PCMCIA controller > diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile > index 8d9386a..2fee7ef 100644 > --- a/drivers/pcmcia/Makefile > +++ b/drivers/pcmcia/Makefile > @@ -70,6 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_E740) ? ? ? ? ? ? ? ? ? ? ? ?+= pxa2xx_e740.o > ?pxa2xx-obj-$(CONFIG_MACH_STARGATE2) ? ? ? ? ? ?+= pxa2xx_stargate2.o > ?pxa2xx-obj-$(CONFIG_MACH_VPAC270) ? ? ? ? ? ? ?+= pxa2xx_vpac270.o > ?pxa2xx-obj-$(CONFIG_MACH_BALLOON3) ? ? ? ? ? ? += pxa2xx_balloon3.o > +pxa2xx-obj-$(CONFIG_MACH_COLIBRI) ? ? ? ? ? ? ?+= pxa2xx_colibri.o > > ?obj-$(CONFIG_PCMCIA_PXA2XX) ? ? ? ? ? ? ? ? ? ?+= pxa2xx_base.o $(pxa2xx-obj-y) > > diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c > new file mode 100644 > index 0000000..4ed876c > --- /dev/null > +++ b/drivers/pcmcia/pxa2xx_colibri.c > @@ -0,0 +1,214 @@ > +/* > + * linux/drivers/pcmcia/pxa2xx_colibri.c > + * > + * Driver for Toradex Colibri PXA270 CF socket > + * > + * Copyright (C) 2010 Marek Vasut > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > + > +#include > +#include > +#include > +#include > + > +#include > + > +#include "soc_common.h" > + > +#define ? ? ? ?COLIBRI270_RESET_GPIO ? 53 > +#define ? ? ? ?COLIBRI270_PPEN_GPIO ? ?107 > +#define ? ? ? ?COLIBRI270_BVD1_GPIO ? ?83 > +#define ? ? ? ?COLIBRI270_BVD2_GPIO ? ?82 > +#define ? ? ? ?COLIBRI270_DETECT_GPIO ?84 > +#define ? ? ? ?COLIBRI270_READY_GPIO ? 1 > + > +static struct { > + ? ? ? int ? ? reset_gpio; > + ? ? ? int ? ? ppen_gpio; > + ? ? ? int ? ? bvd1_gpio; > + ? ? ? int ? ? bvd2_gpio; > + ? ? ? int ? ? detect_gpio; > + ? ? ? int ? ? ready_gpio; > +} colibri_pcmcia_gpio; > + > +static struct pcmcia_irqs colibri_irqs[] = { > + ? ? ? { > + ? ? ? ? ? ? ? .sock = 0, > + ? ? ? ? ? ? ? .str ?= "PCMCIA CD" > + ? ? ? }, > +}; > + > +static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt) > +{ > + ? ? ? int ret; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err1; > + ? ? ? ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err2; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err2; > + ? ? ? ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err3; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err3; > + ? ? ? ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err4; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err4; > + ? ? ? ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err5; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err5; > + ? ? ? ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err6; > + > + ? ? ? ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET"); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err6; > + ? ? ? ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1); > + ? ? ? if (ret) > + ? ? ? ? ? ? ? goto err7; > + > + ? ? ? colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio); > + ? ? ? skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio); > + > + ? ? ? return soc_pcmcia_request_irqs(skt, colibri_irqs, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ARRAY_SIZE(colibri_irqs)); > + > +err7: > + ? ? ? gpio_free(colibri_pcmcia_gpio.detect_gpio); > +err6: > + ? ? ? gpio_free(colibri_pcmcia_gpio.ready_gpio); > +err5: > + ? ? ? gpio_free(colibri_pcmcia_gpio.bvd1_gpio); > +err4: > + ? ? ? gpio_free(colibri_pcmcia_gpio.bvd2_gpio); > +err3: > + ? ? ? gpio_free(colibri_pcmcia_gpio.reset_gpio); > +err2: > + ? ? ? gpio_free(colibri_pcmcia_gpio.ppen_gpio); > +err1: > + ? ? ? return ret; > +} I'd like to advocate for my newly introduced API for such usage: gpio_request_array() in include/asm-generic/gpio.h > + > +static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) > +{ > + ? ? ? gpio_free(colibri_pcmcia_gpio.detect_gpio); > + ? ? ? gpio_free(colibri_pcmcia_gpio.ready_gpio); > + ? ? ? gpio_free(colibri_pcmcia_gpio.bvd1_gpio); > + ? ? ? gpio_free(colibri_pcmcia_gpio.bvd2_gpio); > + ? ? ? gpio_free(colibri_pcmcia_gpio.reset_gpio); > + ? ? ? gpio_free(colibri_pcmcia_gpio.ppen_gpio); > +} > + > +static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct pcmcia_state *state) > +{ > + > + ? ? ? state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio); > + ? ? ? state->ready ?= !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio); > + ? ? ? state->bvd1 ? = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio); > + ? ? ? state->bvd2 ? = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio); Can we make colibri_pcmcia_gpio some part of the *skt private data? > + ? ? ? state->wrprot = 0; > + ? ? ? state->vs_3v ?= 1; > + ? ? ? state->vs_Xv ?= 0; > +} > + > +static int > +colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? const socket_state_t *state) > +{ > + ? ? ? gpio_set_value(colibri_pcmcia_gpio.ppen_gpio, > + ? ? ? ? ? ? ? ? ? ? ? !(state->Vcc == 33 && state->Vpp < 50)); > + ? ? ? gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET); > + ? ? ? return 0; > +} > + > +static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt) > +{ > +} > + > +static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) > +{ > +} > + > +static struct pcmcia_low_level colibri_pcmcia_ops = { > + ? ? ? .owner ? ? ? ? ? ? ? ? ?= THIS_MODULE, > + > + ? ? ? .first ? ? ? ? ? ? ? ? ?= 0, > + ? ? ? .nr ? ? ? ? ? ? ? ? ? ? = 1, > + > + ? ? ? .hw_init ? ? ? ? ? ? ? ?= colibri_pcmcia_hw_init, > + ? ? ? .hw_shutdown ? ? ? ? ? ?= colibri_pcmcia_hw_shutdown, > + > + ? ? ? .socket_state ? ? ? ? ? = colibri_pcmcia_socket_state, > + ? ? ? .configure_socket ? ? ? = colibri_pcmcia_configure_socket, > + > + ? ? ? .socket_init ? ? ? ? ? ?= colibri_pcmcia_socket_init, > + ? ? ? .socket_suspend ? ? ? ? = colibri_pcmcia_socket_suspend, > +}; > + > +static struct platform_device *colibri_pcmcia_device; > + > +static int __init colibri_pcmcia_init(void) > +{ > + ? ? ? int ret; > + > + ? ? ? colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); > + ? ? ? if (!colibri_pcmcia_device) > + ? ? ? ? ? ? ? return -ENOMEM; > + > + ? ? ? /* Colibri PXA270 */ > + ? ? ? if (machine_is_colibri()) { > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.reset_gpio ?= COLIBRI270_RESET_GPIO; > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.ppen_gpio ? = COLIBRI270_PPEN_GPIO; > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.bvd1_gpio ? = COLIBRI270_BVD1_GPIO; > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.bvd2_gpio ? = COLIBRI270_BVD2_GPIO; > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO; > + ? ? ? ? ? ? ? colibri_pcmcia_gpio.ready_gpio ?= COLIBRI270_READY_GPIO; > + ? ? ? } > + > + ? ? ? ret = platform_device_add_data(colibri_pcmcia_device, > + ? ? ? ? ? ? ? &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops)); > + > + ? ? ? if (!ret) > + ? ? ? ? ? ? ? ret = platform_device_add(colibri_pcmcia_device); > + > + ? ? ? if (ret) > + ? ? ? ? ? ? ? platform_device_put(colibri_pcmcia_device); > + > + ? ? ? return ret; > +} > + > +static void __exit colibri_pcmcia_exit(void) > +{ > + ? ? ? platform_device_unregister(colibri_pcmcia_device); > +} > + > +module_init(colibri_pcmcia_init); > +module_exit(colibri_pcmcia_exit); > + > +MODULE_AUTHOR("Marek Vasut "); > +MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270"); > +MODULE_ALIAS("platform:pxa2xx-pcmcia"); > +MODULE_LICENSE("GPL"); > -- > 1.7.1 > >