From: sakoman@gmail.com (Steve Sakoman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 14/18] omap: Overo: Add support for second ethernet port
Date: Tue, 18 May 2010 06:41:39 -0700 [thread overview]
Message-ID: <AANLkTinxHaxG89pUhD7nmMjQSF-p-FB1FWj_w-de9y1r@mail.gmail.com> (raw)
In-Reply-To: <20100505193315.21568.55530.stgit@baageli.muru.com>
On Wed, May 5, 2010 at 12:33 PM, Tony Lindgren <tony@atomide.com> wrote:
> From: Steve Sakoman <steve@sakoman.com>
>
> Some Overo add-on boards include a second ethernet port. ?This patch
> adds support for that second port.
>
> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> ?arch/arm/mach-omap2/board-overo.c | ? 14 +++++++++++++-
> ?1 files changed, 13 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index 8848c7c..79ac414 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -63,6 +63,8 @@
>
> ?#define OVERO_SMSC911X_CS ? ? ?5
> ?#define OVERO_SMSC911X_GPIO ? ?176
> +#define OVERO_SMSC911X2_CS ? ? 4
> +#define OVERO_SMSC911X2_GPIO ? 65
>
> ?#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
> ? ? ? ?defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
> @@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = {
> ? ? ? ?},
> ?};
>
> +static struct resource overo_smsc911x2_resources[] = {
> + ? ? ? {
> + ? ? ? ? ? ? ? .name ? = "smsc911x2-memory",
> + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM,
> + ? ? ? },
> + ? ? ? {
> + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> + ? ? ? },
> +};
> +
> ?static struct smsc911x_platform_config overo_smsc911x_config = {
> ? ? ? ?.irq_polarity ? = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> ? ? ? ?.irq_type ? ? ? = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
> @@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = {
>
> ?static struct platform_device overo_smsc911x_device = {
> ? ? ? ?.name ? ? ? ? ? = "smsc911x",
> - ? ? ? .id ? ? ? ? ? ? = -1,
> + ? ? ? .id ? ? ? ? ? ? = 0,
> ? ? ? ?.num_resources ?= ARRAY_SIZE(overo_smsc911x_resources),
> ? ? ? ?.resource ? ? ? = overo_smsc911x_resources,
> ? ? ? ?.dev ? ? ? ? ? ?= {
>
> --
I just noticed that somehow a good portion of my original patch got
dropped in this version!
Original:
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg26350.html
How would you like to handle getting the missing chuncks?
Steve
next prev parent reply other threads:[~2010-05-18 13:41 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-05 19:32 [PATCH 00/18] omap platform data and board updates for 2.6.35 merge window Tony Lindgren
2010-05-05 19:32 ` [PATCH 01/18] OMAP2/3: Add V4L2 DSS driver support in device.c Tony Lindgren
2010-05-05 19:32 ` [PATCH 02/18] omap1: amsdelta: defconfig updates Tony Lindgren
2010-05-05 19:32 ` [PATCH 03/18] omap2: Add I2C bus 1 initialisation for 2430sdp Tony Lindgren
2010-05-05 19:32 ` [PATCH 04/18] omap2: Add OHCI USB platform init for 2430 SDP Tony Lindgren
2010-05-05 19:32 ` [PATCH 05/18] omap2: select ARCH_OMAP_OTG for OMAP2430 SDP Tony Lindgren
2010-05-05 19:32 ` [PATCH 06/18] omap: Devkit8000: Add mux initialization Tony Lindgren
2010-05-05 19:32 ` [PATCH 07/18] omap: Devkit8000: Update default configuration Tony Lindgren
2010-05-05 19:32 ` [PATCH 08/18] can:ti_hecc: board specific hookup on AM3517EVM Tony Lindgren
2010-05-05 19:33 ` [PATCH 09/18] can:ti_hecc: Enable CAN support on AM3517 Tony Lindgren
2010-05-05 19:33 ` [PATCH 10/18] AM35xx EMAC : define submodule offsets Tony Lindgren
2010-05-05 19:33 ` [PATCH 11/18] AM35xx : Platform specific hookup for EMAC module Tony Lindgren
2010-05-05 19:33 ` [PATCH 12/18] OMAP3 : clock data: Update name string for EMAC clocks Tony Lindgren
2010-05-05 19:45 ` Russell King - ARM Linux
2010-05-05 20:02 ` Tony Lindgren
2010-05-10 20:17 ` Tony Lindgren
2010-05-05 19:33 ` [PATCH 13/18] AM3517 defconfig update : enable EMAC support Tony Lindgren
2010-05-05 19:33 ` [PATCH 14/18] omap: Overo: Add support for second ethernet port Tony Lindgren
2010-05-18 13:41 ` Steve Sakoman [this message]
2010-05-19 18:27 ` Tony Lindgren
2010-05-21 20:15 ` [PATCH 14/18 FIX] " Steve Sakoman
2010-05-05 19:33 ` [PATCH 15/18] omap: rx51: Change the TWL4030 VMMC2 voltage constraints andsupply name Tony Lindgren
2010-05-05 19:33 ` [PATCH 16/18] omap: rx51: Add i2c2 board_info with tlv320aic3x Tony Lindgren
2010-05-05 19:33 ` [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver Tony Lindgren
2010-05-06 6:57 ` Eduardo Valentin
2010-05-06 7:00 ` Eduardo Valentin
2010-05-18 10:00 ` Jarkko Nikula
2010-05-05 19:33 ` [PATCH 18/18] AM35x: fix UI card EHCI port and LCD dependency Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTinxHaxG89pUhD7nmMjQSF-p-FB1FWj_w-de9y1r@mail.gmail.com \
--to=sakoman@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).