* [PATCH 1/3] ARM: S5P6442: Removing ARCH_S5P6442
2011-05-12 1:08 [PATCH 0/3] ARM: Removing ARCH_S5P6442 Kukjin Kim
@ 2011-05-12 1:08 ` Kukjin Kim
2011-05-12 1:08 ` [PATCH 2/3] ASoC: Remove to support sound for S5P6442 Kukjin Kim
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Kukjin Kim @ 2011-05-12 1:08 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
Documentation/arm/Samsung/Overview.txt | 2 -
arch/arm/Kconfig | 16 +-
arch/arm/Makefile | 1 -
arch/arm/common/Kconfig | 2 +-
arch/arm/configs/s5p6442_defconfig | 65 ----
arch/arm/mach-s5p6442/Kconfig | 25 --
arch/arm/mach-s5p6442/Makefile | 24 --
arch/arm/mach-s5p6442/Makefile.boot | 2 -
arch/arm/mach-s5p6442/clock.c | 420 ----------------------
arch/arm/mach-s5p6442/cpu.c | 143 --------
arch/arm/mach-s5p6442/dev-audio.c | 217 -----------
arch/arm/mach-s5p6442/dev-spi.c | 121 -------
arch/arm/mach-s5p6442/dma.c | 105 ------
arch/arm/mach-s5p6442/include/mach/debug-macro.S | 35 --
arch/arm/mach-s5p6442/include/mach/dma.h | 26 --
arch/arm/mach-s5p6442/include/mach/entry-macro.S | 48 ---
arch/arm/mach-s5p6442/include/mach/gpio.h | 123 -------
arch/arm/mach-s5p6442/include/mach/hardware.h | 18 -
arch/arm/mach-s5p6442/include/mach/io.h | 17 -
arch/arm/mach-s5p6442/include/mach/irqs.h | 87 -----
arch/arm/mach-s5p6442/include/mach/map.h | 76 ----
arch/arm/mach-s5p6442/include/mach/memory.h | 19 -
arch/arm/mach-s5p6442/include/mach/pwm-clock.h | 70 ----
arch/arm/mach-s5p6442/include/mach/regs-clock.h | 104 ------
arch/arm/mach-s5p6442/include/mach/regs-irq.h | 19 -
arch/arm/mach-s5p6442/include/mach/spi-clocks.h | 17 -
arch/arm/mach-s5p6442/include/mach/system.h | 23 --
arch/arm/mach-s5p6442/include/mach/tick.h | 26 --
arch/arm/mach-s5p6442/include/mach/timex.h | 24 --
arch/arm/mach-s5p6442/include/mach/uncompress.h | 24 --
arch/arm/mach-s5p6442/include/mach/vmalloc.h | 17 -
arch/arm/mach-s5p6442/init.c | 44 ---
arch/arm/mach-s5p6442/mach-smdk6442.c | 102 ------
arch/arm/mach-s5p6442/setup-i2c0.c | 28 --
arch/arm/plat-s5p/Kconfig | 2 +-
arch/arm/plat-s5p/cpu.c | 10 -
arch/arm/plat-s5p/include/plat/s5p6442.h | 33 --
arch/arm/plat-samsung/include/plat/cpu.h | 1 -
arch/arm/plat-samsung/include/plat/debug-macro.S | 2 +-
arch/arm/plat-samsung/include/plat/devs.h | 6 -
arch/arm/plat-samsung/include/plat/regs-serial.h | 2 +-
arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 1 -
42 files changed, 6 insertions(+), 2141 deletions(-)
delete mode 100644 arch/arm/configs/s5p6442_defconfig
delete mode 100644 arch/arm/mach-s5p6442/Kconfig
delete mode 100644 arch/arm/mach-s5p6442/Makefile
delete mode 100644 arch/arm/mach-s5p6442/Makefile.boot
delete mode 100644 arch/arm/mach-s5p6442/clock.c
delete mode 100644 arch/arm/mach-s5p6442/cpu.c
delete mode 100644 arch/arm/mach-s5p6442/dev-audio.c
delete mode 100644 arch/arm/mach-s5p6442/dev-spi.c
delete mode 100644 arch/arm/mach-s5p6442/dma.c
delete mode 100644 arch/arm/mach-s5p6442/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-s5p6442/include/mach/dma.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-s5p6442/include/mach/gpio.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/hardware.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/io.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/irqs.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/map.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/memory.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/pwm-clock.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/regs-clock.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/regs-irq.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/spi-clocks.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/system.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/tick.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/timex.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-s5p6442/include/mach/vmalloc.h
delete mode 100644 arch/arm/mach-s5p6442/init.c
delete mode 100644 arch/arm/mach-s5p6442/mach-smdk6442.c
delete mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
delete mode 100644 arch/arm/plat-s5p/include/plat/s5p6442.h
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
index c3094ea..658abb2 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -14,7 +14,6 @@ Introduction
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- S5P6440
- - S5P6442
- S5PC100
- S5PC110 / S5PV210
@@ -36,7 +35,6 @@ Configuration
unifying all the SoCs into one kernel.
s5p6440_defconfig - S5P6440 specific default configuration
- s5p6442_defconfig - S5P6442 specific default configuration
s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 377a7a5..e81c72c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -736,16 +736,6 @@ config ARCH_S5P64X0
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
-config ARCH_S5P6442
- bool "Samsung S5P6442"
- select CPU_V6
- select GENERIC_GPIO
- select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- help
- Samsung S5P6442 CPU based systems
-
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
@@ -995,8 +985,6 @@ endif
source "arch/arm/mach-s5p64x0/Kconfig"
-source "arch/arm/mach-s5p6442/Kconfig"
-
source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
@@ -1424,7 +1412,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
- ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+ ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
@@ -2010,7 +1998,7 @@ menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+ depends on !ARCH_S5P64X0
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c7d321a..c17304b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
-machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index ea5ee4d..4b71766 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -7,7 +7,7 @@ config ARM_VIC
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
- default 3 if ARCH_S5P6442 || ARCH_S5PC100
+ default 3 if ARCH_S5PC100
default 2
depends on ARM_VIC
help
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
deleted file mode 100644
index 0e92a78..0000000
--- a/arch/arm/configs/s5p6442_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6442=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6442=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
deleted file mode 100644
index 33569e4..0000000
--- a/arch/arm/mach-s5p6442/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/mach-s5p6442/Kconfig
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5P6442
-
-if ARCH_S5P6442
-
-config CPU_S5P6442
- bool
- select S3C_PL330_DMA
- help
- Enable S5P6442 CPU support
-
-config MACH_SMDK6442
- bool "SMDK6442"
- select CPU_S5P6442
- select S3C_DEV_WDT
- help
- Machine support for Samsung SMDK6442
-
-endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
deleted file mode 100644
index 90a3d83..0000000
--- a/arch/arm/mach-s5p6442/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# arch/arm/mach-s5p6442/Makefile
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S5P6442 system
-
-obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
-
-# device support
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
deleted file mode 100644
index ff90aa1..0000000
--- a/arch/arm/mach-s5p6442/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y := 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
deleted file mode 100644
index fbbc7be..0000000
--- a/arch/arm/mach-s5p6442/clock.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p6442.h>
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-/* Possible clock sources for ARM Mux */
-static struct clk *clk_src_arm_list[] = {
- [1] = &clk_mout_apll.clk,
- [2] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_arm = {
- .sources = clk_src_arm_list,
- .nr_sources = ARRAY_SIZE(clk_src_arm_list),
-};
-
-static struct clksrc_clk clk_mout_arm = {
- .clk = {
- .name = "mout_arm",
- .id = -1,
- },
- .sources = &clk_src_arm,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-};
-
-static struct clk clk_dout_a2m = {
- .name = "dout_a2m",
- .id = -1,
- .parent = &clk_mout_apll.clk,
-};
-
-/* Possible clock sources for D0 Mux */
-static struct clk *clk_src_d0_list[] = {
- [1] = &clk_mout_mpll.clk,
- [2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d0 = {
- .sources = clk_src_d0_list,
- .nr_sources = ARRAY_SIZE(clk_src_d0_list),
-};
-
-static struct clksrc_clk clk_mout_d0 = {
- .clk = {
- .name = "mout_d0",
- .id = -1,
- },
- .sources = &clk_src_d0,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
-};
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_arm.clk,
-};
-
-/* Possible clock sources for D0SYNC Mux */
-static struct clk *clk_src_d0sync_list[] = {
- [1] = &clk_mout_d0.clk,
- [2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d0sync = {
- .sources = clk_src_d0sync_list,
- .nr_sources = ARRAY_SIZE(clk_src_d0sync_list),
-};
-
-static struct clksrc_clk clk_mout_d0sync = {
- .clk = {
- .name = "mout_d0sync",
- .id = -1,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-};
-
-/* Possible clock sources for D1 Mux */
-static struct clk *clk_src_d1_list[] = {
- [1] = &clk_mout_mpll.clk,
- [2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d1 = {
- .sources = clk_src_d1_list,
- .nr_sources = ARRAY_SIZE(clk_src_d1_list),
-};
-
-static struct clksrc_clk clk_mout_d1 = {
- .clk = {
- .name = "mout_d1",
- .id = -1,
- },
- .sources = &clk_src_d1,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
-};
-
-/* Possible clock sources for D1SYNC Mux */
-static struct clk *clk_src_d1sync_list[] = {
- [1] = &clk_mout_d1.clk,
- [2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d1sync = {
- .sources = clk_src_d1sync_list,
- .nr_sources = ARRAY_SIZE(clk_src_d1sync_list),
-};
-
-static struct clksrc_clk clk_mout_d1sync = {
- .clk = {
- .name = "mout_d1sync",
- .id = -1,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-};
-
-static struct clk clk_hclkd0 = {
- .name = "hclkd0",
- .id = -1,
- .parent = &clk_mout_d0sync.clk,
-};
-
-static struct clk clk_hclkd1 = {
- .name = "hclkd1",
- .id = -1,
- .parent = &clk_mout_d1sync.clk,
-};
-
-static struct clk clk_pclkd0 = {
- .name = "pclkd0",
- .id = -1,
- .parent = &clk_hclkd0,
-};
-
-static struct clk clk_pclkd1 = {
- .name = "pclkd1",
- .id = -1,
- .parent = &clk_hclkd1,
-};
-
-int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
-}
-
-int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "dout_a2m",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
- }, {
- .clk = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_arm.clk,
- },
- .sources = &clk_src_arm,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
- }, {
- .clk = {
- .name = "hclkd1",
- .id = -1,
- .parent = &clk_mout_d1sync.clk,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "hclkd0",
- .id = -1,
- .parent = &clk_mout_d0sync.clk,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "pclkd0",
- .id = -1,
- .parent = &clk_hclkd0,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
- }, {
- .clk = {
- .name = "pclkd1",
- .id = -1,
- .parent = &clk_hclkd1,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
- }
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_epll,
- &clk_mout_arm,
- &clk_mout_d0,
- &clk_mout_d0sync,
- &clk_mout_d1,
- &clk_mout_d1sync,
-};
-
-void __init_or_cpufreq s5p6442_setup_clocks(void)
-{
- struct clk *pclkd0_clk;
- struct clk *pclkd1_clk;
-
- unsigned long xtal;
- unsigned long arm;
- unsigned long hclkd0 = 0;
- unsigned long hclkd1 = 0;
- unsigned long pclkd0 = 0;
- unsigned long pclkd1 = 0;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal = clk_get_rate(&clk_xtal);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
- epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
- printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
- apll, mpll, epll);
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-
- arm = clk_get_rate(&clk_dout_apll);
- hclkd0 = clk_get_rate(&clk_hclkd0);
- hclkd1 = clk_get_rate(&clk_hclkd1);
-
- pclkd0_clk = clk_get(NULL, "pclkd0");
- BUG_ON(IS_ERR(pclkd0_clk));
-
- pclkd0 = clk_get_rate(pclkd0_clk);
- clk_put(pclkd0_clk);
-
- pclkd1_clk = clk_get(NULL, "pclkd1");
- BUG_ON(IS_ERR(pclkd1_clk));
-
- pclkd1 = clk_get_rate(pclkd1_clk);
- clk_put(pclkd1_clk);
-
- printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
- hclkd0, hclkd1, pclkd0, pclkd1);
-
- /* For backward compatibility */
- clk_f.rate = arm;
- clk_h.rate = hclkd1;
- clk_p.rate = pclkd1;
-
- clk_pclkd0.rate = pclkd0;
- clk_pclkd1.rate = pclkd1;
-}
-
-static struct clk init_clocks_off[] = {
- {
- .name = "pdma",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- },
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "systimer",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<16),
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<17),
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<18),
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<19),
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<23),
- },
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_d0.clk,
- &clk_mout_d0sync.clk,
- &clk_mout_d1.clk,
- &clk_mout_d1sync.clk,
- &clk_hclkd0,
- &clk_pclkd0,
- &clk_hclkd1,
- &clk_pclkd1,
-};
-
-void __init s5p6442_register_clocks(void)
-{
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
deleted file mode 100644
index 842af86..0000000
--- a/arch/arm/mach-s5p6442/cpu.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6442.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p6442_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P6442_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }
-};
-
-static void s5p6442_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-/*
- * s5p6442_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5p6442_map_io(void)
-{
- iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
-}
-
-void __init s5p6442_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6442_register_clocks();
- s5p6442_setup_clocks();
-}
-
-void __init s5p6442_init_irq(void)
-{
- /* S5P6442 supports 3 VIC */
- u32 vic[3];
-
- /* VIC0, VIC1, and VIC2: some interrupt reserved */
- vic[0] = 0x7fefffff;
- vic[1] = 0X7f389c81;
- vic[2] = 0X1bbbcfff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6442_sysclass = {
- .name = "s5p6442-core",
-};
-
-static struct sys_device s5p6442_sysdev = {
- .cls = &s5p6442_sysclass,
-};
-
-static int __init s5p6442_core_init(void)
-{
- return sysdev_class_register(&s5p6442_sysclass);
-}
-
-core_initcall(s5p6442_core_init);
-
-int __init s5p6442_init(void)
-{
- printk(KERN_INFO "S5P6442: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5p6442_idle;
-
- return sysdev_register(&s5p6442_sysdev);
-}
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
deleted file mode 100644
index 8719dc4..0000000
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6442_cfg_i2s(struct platform_device *pdev)
-{
- unsigned int base;
-
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 1:
- base = S5P6442_GPC1(0);
- break;
-
- case 0:
- base = S5P6442_GPC0(0);
- break;
-
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
- return 0;
-}
-
-static const char *rclksrc_v35[] = {
- [0] = "busclk",
- [1] = "i2sclk",
-};
-
-static struct s3c_audio_pdata i2sv35_pdata = {
- .cfg_gpio = s5p6442_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
- .src_clk = rclksrc_v35,
- },
- },
-};
-
-static struct resource s5p6442_iis0_resource[] = {
- [0] = {
- .start = S5P6442_PA_I2S0,
- .end = S5P6442_PA_I2S0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S0_TX,
- .end = DMACH_I2S0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S0_RX,
- .end = DMACH_I2S0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DMACH_I2S0S_TX,
- .end = DMACH_I2S0S_TX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_iis0_resource),
- .resource = s5p6442_iis0_resource,
- .dev = {
- .platform_data = &i2sv35_pdata,
- },
-};
-
-static const char *rclksrc_v3[] = {
- [0] = "iis",
- [1] = "sclk_audio",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5p6442_cfg_i2s,
- .type = {
- .i2s = {
- .src_clk = rclksrc_v3,
- },
- },
-};
-
-static struct resource s5p6442_iis1_resource[] = {
- [0] = {
- .start = S5P6442_PA_I2S1,
- .end = S5P6442_PA_I2S1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S1_TX,
- .end = DMACH_I2S1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S1_RX,
- .end = DMACH_I2S1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6442_iis1_resource),
- .resource = s5p6442_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6442_GPC0(0);
- break;
-
- case 1:
- base = S5P6442_GPC1(0);
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5p6442_pcm_cfg_gpio,
-};
-
-static struct resource s5p6442_pcm0_resource[] = {
- [0] = {
- .start = S5P6442_PA_PCM0,
- .end = S5P6442_PA_PCM0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM0_TX,
- .end = DMACH_PCM0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM0_RX,
- .end = DMACH_PCM0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource),
- .resource = s5p6442_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5p6442_pcm1_resource[] = {
- [0] = {
- .start = S5P6442_PA_PCM1,
- .end = S5P6442_PA_PCM1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM1_TX,
- .end = DMACH_PCM1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM1_RX,
- .end = DMACH_PCM1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource),
- .resource = s5p6442_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
deleted file mode 100644
index cce8c24..0000000
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
- [S5P6442_SPI_SRCCLK_PCLK] = "pclk",
- [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct resource s5p6442_spi0_resource[] = {
- [0] = {
- .start = S5P6442_PA_SPI,
- .end = S5P6442_PA_SPI + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
- .cfg_gpio = s5p6442_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6442_device_spi = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_spi0_resource),
- .resource = s5p6442_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5p6442_spi0_pdata,
- },
-};
-
-void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5p6442_spi0_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c
deleted file mode 100644
index 7dfb136..0000000
--- a/arch/arm/mach-s5p6442/dma.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource s5p6442_pdma_resource[] = {
- [0] = {
- .start = S5P6442_PA_PDMA,
- .end = S5P6442_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA,
- .end = IRQ_PDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_MAX,
- [7] = DMACH_MAX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_MAX,
- [15] = DMACH_MAX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_MAX,
- [19] = DMACH_MAX,
- [20] = DMACH_PCM0_RX,
- [21] = DMACH_PCM0_TX,
- [22] = DMACH_PCM1_RX,
- [23] = DMACH_PCM1_TX,
- [24] = DMACH_MAX,
- [25] = DMACH_MAX,
- [26] = DMACH_MAX,
- [27] = DMACH_MSM_REQ0,
- [28] = DMACH_MSM_REQ1,
- [29] = DMACH_MSM_REQ2,
- [30] = DMACH_MSM_REQ3,
- [31] = DMACH_MAX,
- },
-};
-
-static struct platform_device s5p6442_device_pdma = {
- .name = "s3c-pl330",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p6442_pdma_resource),
- .resource = s5p6442_pdma_resource,
- .dev = {
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5p6442_pdma_pdata,
- },
-};
-
-static struct platform_device *s5p6442_dmacs[] __initdata = {
- &s5p6442_device_pdma,
-};
-
-static int __init s5p6442_dma_init(void)
-{
- platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
-
- return 0;
-}
-arch_initcall(s5p6442_dma_init);
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
deleted file mode 100644
index e221320..0000000
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
- .macro addruart, rp, rv
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h
deleted file mode 100644
index 81209eb..0000000
--- a/arch/arm/mach-s5p6442/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
deleted file mode 100644
index 6d574ed..0000000
--- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5P6442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
deleted file mode 100644
index b8715df..0000000
--- a/arch/arm/mach-s5p6442/include/mach/gpio.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6442_GPIO_A0_NR (8)
-#define S5P6442_GPIO_A1_NR (2)
-#define S5P6442_GPIO_B_NR (4)
-#define S5P6442_GPIO_C0_NR (5)
-#define S5P6442_GPIO_C1_NR (5)
-#define S5P6442_GPIO_D0_NR (2)
-#define S5P6442_GPIO_D1_NR (6)
-#define S5P6442_GPIO_E0_NR (8)
-#define S5P6442_GPIO_E1_NR (5)
-#define S5P6442_GPIO_F0_NR (8)
-#define S5P6442_GPIO_F1_NR (8)
-#define S5P6442_GPIO_F2_NR (8)
-#define S5P6442_GPIO_F3_NR (6)
-#define S5P6442_GPIO_G0_NR (7)
-#define S5P6442_GPIO_G1_NR (7)
-#define S5P6442_GPIO_G2_NR (7)
-#define S5P6442_GPIO_H0_NR (8)
-#define S5P6442_GPIO_H1_NR (8)
-#define S5P6442_GPIO_H2_NR (8)
-#define S5P6442_GPIO_H3_NR (8)
-#define S5P6442_GPIO_J0_NR (8)
-#define S5P6442_GPIO_J1_NR (6)
-#define S5P6442_GPIO_J2_NR (8)
-#define S5P6442_GPIO_J3_NR (8)
-#define S5P6442_GPIO_J4_NR (5)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P6442_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5P6442_GPIO_A0_START = 0,
- S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
- S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
- S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
- S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
- S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
- S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
- S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
- S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
- S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
- S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
- S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
- S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
- S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
- S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
- S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
- S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
- S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
- S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
- S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
- S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
- S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
- S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
- S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
- S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
-};
-
-/* S5P6442 GPIO number definitions. */
-#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr))
-#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr))
-#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr))
-#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr))
-#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr))
-#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr))
-#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr))
-#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr))
-#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr))
-#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr))
-#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr))
-#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr))
-#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr))
-#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr))
-#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr))
-#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr))
-#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr))
-#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr))
-#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr))
-#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr))
-#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr))
-#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr))
-#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr))
-#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr))
-#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr))
-
-/* the end of the S5P6442 specific gpios */
-#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
-#define S3C_GPIO_END S5P6442_GPIO_END
-
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
deleted file mode 100644
index 8cd7b67..0000000
--- a/arch/arm/mach-s5p6442/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
deleted file mode 100644
index 5d2195a..0000000
--- a/arch/arm/mach-s5p6442/include/mach/io.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/io.h
- *
- * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S5P6442
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
deleted file mode 100644
index 3fbc6c3..0000000
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA S5P_IRQ_VIC0(19)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-
-/* VIC1 */
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_IIC S5P_IRQ_VIC1(19)
-#define IRQ_IIC1 S5P_IRQ_VIC1(20)
-#define IRQ_IIC2 S5P_IRQ_VIC1(21)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_COMMRX S5P_IRQ_VIC1(29)
-#define IRQ_COMMTX S5P_IRQ_VIC1(30)
-
-/* VIC2 */
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_Mixer S5P_IRQ_VIC2(11)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_RP S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_SSS_INT S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH S5P_IRQ_VIC2(28)
-#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-
-#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_EINT(31) + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
deleted file mode 100644
index 058dab4..0000000
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6442_PA_SDRAM 0x20000000
-
-#define S5P6442_PA_I2S0 0xC0B00000
-#define S5P6442_PA_I2S1 0xF2200000
-
-#define S5P6442_PA_CHIPID 0xE0000000
-
-#define S5P6442_PA_SYSCON 0xE0100000
-
-#define S5P6442_PA_GPIO 0xE0200000
-
-#define S5P6442_PA_VIC0 0xE4000000
-#define S5P6442_PA_VIC1 0xE4100000
-#define S5P6442_PA_VIC2 0xE4200000
-
-#define S5P6442_PA_SROMC 0xE7000000
-
-#define S5P6442_PA_MDMA 0xE8000000
-#define S5P6442_PA_PDMA 0xE9000000
-
-#define S5P6442_PA_TIMER 0xEA000000
-
-#define S5P6442_PA_SYSTIMER 0xEA100000
-
-#define S5P6442_PA_WATCHDOG 0xEA200000
-
-#define S5P6442_PA_UART 0xEC000000
-
-#define S5P6442_PA_IIC0 0xEC100000
-
-#define S5P6442_PA_SPI 0xEC300000
-
-#define S5P6442_PA_PCM0 0xF2400000
-#define S5P6442_PA_PCM1 0xF2500000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_IIC S5P6442_PA_IIC0
-#define S3C_PA_WDT S5P6442_PA_WATCHDOG
-
-#define S5P_PA_CHIPID S5P6442_PA_CHIPID
-#define S5P_PA_SDRAM S5P6442_PA_SDRAM
-#define S5P_PA_SROMC S5P6442_PA_SROMC
-#define S5P_PA_SYSCON S5P6442_PA_SYSCON
-#define S5P_PA_TIMER S5P6442_PA_TIMER
-
-/* UART */
-
-#define S3C_PA_UART S5P6442_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
deleted file mode 100644
index cfe259d..0000000
--- a/arch/arm/mach-s5p6442/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
deleted file mode 100644
index 2724b37..0000000
--- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6442 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
deleted file mode 100644
index 00828a3..0000000
--- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
-#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
-
-#define S5P_APLL_CON S5P_CLKREG(0x100)
-#define S5P_MPLL_CON S5P_CLKREG(0x108)
-#define S5P_EPLL_CON S5P_CLKREG(0x110)
-#define S5P_VPLL_CON S5P_CLKREG(0x120)
-
-#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
-#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
-#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
-#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
-
-#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
-#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
-
-#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
-#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
-#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
-
-#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
-#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
-
-/* CLK_OUT */
-#define S5P_CLK_OUT_SHIFT (12)
-#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT)
-#define S5P_CLK_OUT S5P_CLKREG(0x500)
-
-#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000)
-#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004)
-
-#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100)
-#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104)
-
-#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
-
-/* Register Bit definition */
-#define S5P_EPLL_EN (1<<31)
-#define S5P_EPLL_MASK 0xffffffff
-#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_APLL_SHIFT (0)
-#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
-#define S5P_CLKDIV0_A2M_SHIFT (4)
-#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
-#define S5P_CLKDIV0_D0CLK_SHIFT (16)
-#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT)
-#define S5P_CLKDIV0_P0CLK_SHIFT (20)
-#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
-#define S5P_CLKDIV0_D1CLK_SHIFT (24)
-#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT)
-#define S5P_CLKDIV0_P1CLK_SHIFT (28)
-#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
-
-/* Clock MUX status Registers */
-#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0)
-#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4)
-#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8)
-#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12)
-#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16)
-#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20)
-#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24)
-#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
-#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24)
-#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
-#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28)
-#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
deleted file mode 100644
index 73782b5..0000000
--- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
deleted file mode 100644
index 7fd8820..0000000
--- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6442_PLAT_SPI_CLKS_H
-#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6442_SPI_SRCCLK_PCLK 0
-#define S5P6442_SPI_SRCCLK_SCLK 1
-
-#endif /* __S5P6442_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
deleted file mode 100644
index c30c1cc..0000000
--- a/arch/arm/mach-s5p6442/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/system-reset.h>
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
deleted file mode 100644
index e1d4cab..0000000
--- a/arch/arm/mach-s5p6442/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5P6442 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
deleted file mode 100644
index ff8f2fc..0000000
--- a/arch/arm/mach-s5p6442/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S5P6442 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
deleted file mode 100644
index 5ac7cbe..0000000
--- a/arch/arm/mach-s5p6442/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
- /* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
deleted file mode 100644
index 4aa55e5..0000000
--- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S5P6442 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
deleted file mode 100644
index 1874bdb..0000000
--- a/arch/arm/mach-s5p6442/init.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6442.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
- [0] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5p6442_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
- }
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
deleted file mode 100644
index eaf6b9c..0000000
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/s5p6442.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
-};
-
-static struct platform_device *smdk6442_devices[] __initdata = {
- &s3c_device_i2c0,
- &samsung_asoc_dma,
- &s5p6442_device_iis0,
- &s3c_device_wdt,
-};
-
-static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static void __init smdk6442_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
-}
-
-static void __init smdk6442_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, smdk6442_i2c_devs0,
- ARRAY_SIZE(smdk6442_i2c_devs0));
- platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
-}
-
-MACHINE_START(SMDK6442, "SMDK6442")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
- .init_irq = s5p6442_init_irq,
- .map_io = smdk6442_map_io,
- .init_machine = smdk6442_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
deleted file mode 100644
index aad8565..0000000
--- a/arch/arm/mach-s5p6442/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8492297..5878bd9 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
config PLAT_S5P
bool
- depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 5cf5e72..bbc2aa7 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -21,7 +21,6 @@
#include <plat/cpu.h>
#include <plat/s5p6440.h>
-#include <plat/s5p6442.h>
#include <plat/s5p6450.h>
#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
@@ -30,7 +29,6 @@
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6442[] = "S5P6442";
static const char name_s5p6450[] = "S5P6450";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
@@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
- .idcode = 0x36442000,
- .idmask = 0xfffff000,
- .map_io = s5p6442_map_io,
- .init_clocks = s5p6442_init_clocks,
- .init_uarts = s5p6442_init_uarts,
- .init = s5p6442_init,
- .name = name_s5p6442,
- }, {
.idcode = 0x36450000,
.idmask = 0xfffff000,
.map_io = s5p6450_map_io,
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
deleted file mode 100644
index 7b88013..0000000
--- a/arch/arm/plat-s5p/include/plat/s5p6442.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5p6442.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p6442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6442 related SoCs */
-
-extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5p6442_register_clocks(void);
-extern void s5p6442_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6442
-
-extern int s5p6442_init(void);
-extern void s5p6442_init_irq(void);
-extern void s5p6442_map_io(void);
-extern void s5p6442_init_clocks(int xtal);
-
-#define s5p6442_init_uarts s5p6442_common_init_uarts
-
-#else
-#define s5p6442_init_clocks NULL
-#define s5p6442_init_uarts NULL
-#define s5p6442_map_io NULL
-#define s5p6442_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index cedfff5..6ff205b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -80,7 +80,6 @@ extern struct sysdev_class s3c2443_sysclass;
extern struct sysdev_class s3c6410_sysclass;
extern struct sysdev_class s3c64xx_sysclass;
extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5p6442_sysclass;
extern struct sysdev_class s5pv210_sysclass;
extern struct sysdev_class exynos4_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index dc6efd9..207e275 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -11,7 +11,7 @@
#include <plat/regs-serial.h>
-/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index f0da6b7..d64adf1 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -110,12 +110,6 @@ extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_ahci;
-extern struct platform_device s5p6442_device_pcm0;
-extern struct platform_device s5p6442_device_pcm1;
-extern struct platform_device s5p6442_device_iis0;
-extern struct platform_device s5p6442_device_iis1;
-extern struct platform_device s5p6442_device_spi;
-
extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 788837e..c151c5f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -194,7 +194,7 @@
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
-/* Following are specific to S5PV210 and S5P6442 */
+/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
#define S5PV210_UCON_PCLK (0<<10)
#define S5PV210_UCON_UCLK (1<<10)
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index ff1a561..0ffe34a 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
#endif /* __S3C64XX_PLAT_SPI_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread