From mboxrd@z Thu Jan 1 00:00:00 1970 From: eballetbo@gmail.com (=?UTF-8?Q?Enric_Balletb=C3=B2_i_Serra?=) Date: Mon, 16 May 2011 09:18:44 +0200 Subject: [RESEND PATCH 4/4] omap: drop board-igep0030.c In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org 2011/5/12 Mike Rapoport : > since it is merged into board-igep0020.c > > Signed-off-by: Mike Rapoport > --- > ?arch/arm/mach-omap2/Kconfig ? ? ? ? ?| ? ?1 + > ?arch/arm/mach-omap2/Makefile ? ? ? ? | ? ?2 - > ?arch/arm/mach-omap2/board-igep0030.c | ?438 ---------------------------------- > ?3 files changed, 1 insertions(+), 440 deletions(-) > ?delete mode 100644 arch/arm/mach-omap2/board-igep0030.c > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index b997a35..19d5891 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -288,6 +288,7 @@ config MACH_IGEP0030 > ? ? ? ?depends on ARCH_OMAP3 > ? ? ? ?default y > ? ? ? ?select OMAP_PACKAGE_CBB > + ? ? ? select MACH_IGEP0020 > > ?config MACH_SBC3530 > ? ? ? ?bool "OMAP3 SBC STALKER board" > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index a0c2cae..186f482 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35) ? ? ? ? ? += board-cm-t35.o \ > ?obj-$(CONFIG_MACH_CM_T3517) ? ? ? ? ? ?+= board-cm-t3517.o > ?obj-$(CONFIG_MACH_IGEP0020) ? ? ? ? ? ?+= board-igep0020.o \ > ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? hsmmc.o > -obj-$(CONFIG_MACH_IGEP0030) ? ? ? ? ? ?+= board-igep0030.o \ > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?hsmmc.o > ?obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) ? ? += board-omap3touchbook.o \ > ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? hsmmc.o > ?obj-$(CONFIG_MACH_OMAP_4430SDP) ? ? ? ? ? ? ? ?+= board-4430sdp.o \ > diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c > deleted file mode 100644 > index 83f6be2..0000000 > --- a/arch/arm/mach-omap2/board-igep0030.c > +++ /dev/null > @@ -1,438 +0,0 @@ > -/* > - * Copyright (C) 2010 - ISEE 2007 SL > - * > - * Modified from mach-omap2/board-generic.c > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#include > -#include > -#include > -#include > -#include > -#include > -#include > -#include > -#include > - > -#include > -#include > -#include > -#include > - > -#include > -#include > - > -#include > -#include > -#include > -#include > -#include > - > -#include "mux.h" > -#include "hsmmc.h" > -#include "sdram-numonyx-m65kxxxxam.h" > -#include "common-board-devices.h" > - > -#define IGEP3_GPIO_LED0_GREEN ?54 > -#define IGEP3_GPIO_LED0_RED ? ?53 > -#define IGEP3_GPIO_LED1_RED ? ?16 > - > -#define IGEP3_GPIO_WIFI_NPD ? ?138 > -#define IGEP3_GPIO_WIFI_NRESET 139 > -#define IGEP3_GPIO_BT_NRESET ? 137 > - > -#define IGEP3_GPIO_USBH_NRESET ?183 > - > - > -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ > - ? ? ? defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) > - > -#define ONENAND_MAP ? ? ? ? ? ? 0x20000000 > - > -/* > - * x2 Flash built-in COMBO POP MEMORY > - * Since the device is equipped with two DataRAMs, and two-plane NAND > - * Flash memory array, these two component enables simultaneous program > - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 > - * while Plane2 has only odd blocks such as block1, block3, block5. > - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) > - */ > - > -static struct mtd_partition igep3_onenand_partitions[] = { > - ? ? ? { > - ? ? ? ? ? ? ? .name ? ? ? ? ? = "X-Loader", > - ? ? ? ? ? ? ? .offset ? ? ? ? = 0, > - ? ? ? ? ? ? ? .size ? ? ? ? ? = 2 * (64*(2*2048)) > - ? ? ? }, > - ? ? ? { > - ? ? ? ? ? ? ? .name ? ? ? ? ? = "U-Boot", > - ? ? ? ? ? ? ? .offset ? ? ? ? = MTDPART_OFS_APPEND, > - ? ? ? ? ? ? ? .size ? ? ? ? ? = 6 * (64*(2*2048)), > - ? ? ? }, > - ? ? ? { > - ? ? ? ? ? ? ? .name ? ? ? ? ? = "Environment", > - ? ? ? ? ? ? ? .offset ? ? ? ? = MTDPART_OFS_APPEND, > - ? ? ? ? ? ? ? .size ? ? ? ? ? = 2 * (64*(2*2048)), > - ? ? ? }, > - ? ? ? { > - ? ? ? ? ? ? ? .name ? ? ? ? ? = "Kernel", > - ? ? ? ? ? ? ? .offset ? ? ? ? = MTDPART_OFS_APPEND, > - ? ? ? ? ? ? ? .size ? ? ? ? ? = 12 * (64*(2*2048)), > - ? ? ? }, > - ? ? ? { > - ? ? ? ? ? ? ? .name ? ? ? ? ? = "File System", > - ? ? ? ? ? ? ? .offset ? ? ? ? = MTDPART_OFS_APPEND, > - ? ? ? ? ? ? ? .size ? ? ? ? ? = MTDPART_SIZ_FULL, > - ? ? ? }, > -}; > - > -static struct omap_onenand_platform_data igep3_onenand_pdata = { > - ? ? ? .parts = igep3_onenand_partitions, > - ? ? ? .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), > - ? ? ? .onenand_setup = NULL, > - ? ? ? .dma_channel ? ?= -1, ? /* disable DMA in OMAP OneNAND driver */ > -}; > - > -static struct platform_device igep3_onenand_device = { > - ? ? ? .name ? ? ? ? ? = "omap2-onenand", > - ? ? ? .id ? ? ? ? ? ? = -1, > - ? ? ? .dev = { > - ? ? ? ? ? ? ? .platform_data = &igep3_onenand_pdata, > - ? ? ? }, > -}; > - > -static void __init igep3_flash_init(void) > -{ > - ? ? ? u8 cs = 0; > - ? ? ? u8 onenandcs = GPMC_CS_NUM + 1; > - > - ? ? ? for (cs = 0; cs < GPMC_CS_NUM; cs++) { > - ? ? ? ? ? ? ? u32 ret; > - ? ? ? ? ? ? ? ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); > - > - ? ? ? ? ? ? ? /* Check if NAND/oneNAND is configured */ > - ? ? ? ? ? ? ? if ((ret & 0xC00) == 0x800) > - ? ? ? ? ? ? ? ? ? ? ? /* NAND found */ > - ? ? ? ? ? ? ? ? ? ? ? pr_err("IGEP3: Unsupported NAND found\n"); > - ? ? ? ? ? ? ? else { > - ? ? ? ? ? ? ? ? ? ? ? ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); > - > - ? ? ? ? ? ? ? ? ? ? ? if ((ret & 0x3F) == (ONENAND_MAP >> 24)) > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* OneNAND found */ > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? onenandcs = cs; > - ? ? ? ? ? ? ? } > - ? ? ? } > - > - ? ? ? if (onenandcs > GPMC_CS_NUM) { > - ? ? ? ? ? ? ? pr_err("IGEP3: Unable to find configuration in GPMC\n"); > - ? ? ? ? ? ? ? return; > - ? ? ? } > - > - ? ? ? igep3_onenand_pdata.cs = onenandcs; > - > - ? ? ? if (platform_device_register(&igep3_onenand_device) < 0) > - ? ? ? ? ? ? ? pr_err("IGEP3: Unable to register OneNAND device\n"); > -} > - > -#else > -static void __init igep3_flash_init(void) {} > -#endif > - > -static struct regulator_consumer_supply igep3_vmmc1_supply = > - ? ? ? REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); > - > -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ > -static struct regulator_init_data igep3_vmmc1 = { > - ? ? ? .constraints = { > - ? ? ? ? ? ? ? .min_uV ? ? ? ? ? ? ? ? = 1850000, > - ? ? ? ? ? ? ? .max_uV ? ? ? ? ? ? ? ? = 3150000, > - ? ? ? ? ? ? ? .valid_modes_mask ? ? ? = REGULATOR_MODE_NORMAL > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_MODE_STANDBY, > - ? ? ? ? ? ? ? .valid_ops_mask ? ? ? ? = REGULATOR_CHANGE_VOLTAGE > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_CHANGE_MODE > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_CHANGE_STATUS, > - ? ? ? }, > - ? ? ? .num_consumer_supplies ?= 1, > - ? ? ? .consumer_supplies ? ? ?= &igep3_vmmc1_supply, > -}; > - > -static struct regulator_consumer_supply igep3_vio_supply = > - ? ? ? REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); > - > -static struct regulator_init_data igep3_vio = { > - ? ? ? .constraints = { > - ? ? ? ? ? ? ? .min_uV ? ? ? ? ? ? ? ? = 1800000, > - ? ? ? ? ? ? ? .max_uV ? ? ? ? ? ? ? ? = 1800000, > - ? ? ? ? ? ? ? .apply_uV ? ? ? ? ? ? ? = 1, > - ? ? ? ? ? ? ? .valid_modes_mask ? ? ? = REGULATOR_MODE_NORMAL > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_MODE_STANDBY, > - ? ? ? ? ? ? ? .valid_ops_mask ? ? ? ? = REGULATOR_CHANGE_VOLTAGE > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_CHANGE_MODE > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | REGULATOR_CHANGE_STATUS, > - ? ? ? }, > - ? ? ? .num_consumer_supplies ?= 1, > - ? ? ? .consumer_supplies ? ? ?= &igep3_vio_supply, > -}; > - > -static struct regulator_consumer_supply igep3_vmmc2_supply = > - ? ? ? REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); > - > -static struct regulator_init_data igep3_vmmc2 = { > - ? ? ? .constraints ? ?= { > - ? ? ? ? ? ? ? .valid_modes_mask ? ? ? = REGULATOR_MODE_NORMAL, > - ? ? ? ? ? ? ? .always_on ? ? ? ? ? ? ?= 1, > - ? ? ? }, > - ? ? ? .num_consumer_supplies ?= 1, > - ? ? ? .consumer_supplies ? ? ?= &igep3_vmmc2_supply, > -}; > - > -static struct fixed_voltage_config igep3_vwlan = { > - ? ? ? .supply_name ? ? ? ? ? ?= "vwlan", > - ? ? ? .microvolts ? ? ? ? ? ? = 3300000, > - ? ? ? .gpio ? ? ? ? ? ? ? ? ? = -EINVAL, > - ? ? ? .enabled_at_boot ? ? ? ?= 1, > - ? ? ? .init_data ? ? ? ? ? ? ?= &igep3_vmmc2, > -}; > - > -static struct platform_device igep3_vwlan_device = { > - ? ? ? .name ? = "reg-fixed-voltage", > - ? ? ? .id ? ? = 0, > - ? ? ? .dev ? ?= { > - ? ? ? ? ? ? ? .platform_data = &igep3_vwlan, > - ? ? ? }, > -}; > - > -static struct omap2_hsmmc_info mmc[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .mmc ? ? ? ? ? ?= 1, > - ? ? ? ? ? ? ? .caps ? ? ? ? ? = MMC_CAP_4_BIT_DATA, > - ? ? ? ? ? ? ? .gpio_cd ? ? ? ?= -EINVAL, > - ? ? ? ? ? ? ? .gpio_wp ? ? ? ?= -EINVAL, > - ? ? ? }, > -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .mmc ? ? ? ? ? ?= 2, > - ? ? ? ? ? ? ? .caps ? ? ? ? ? = MMC_CAP_4_BIT_DATA, > - ? ? ? ? ? ? ? .gpio_cd ? ? ? ?= -EINVAL, > - ? ? ? ? ? ? ? .gpio_wp ? ? ? ?= -EINVAL, > - ? ? ? }, > -#endif > - ? ? ? {} ? ? ?/* Terminator */ > -}; > - > -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) > -#include > - > -static struct gpio_led igep3_gpio_leds[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .name ? ? ? ? ? ? ? ? ? = "gpio-led:red:d0", > - ? ? ? ? ? ? ? .gpio ? ? ? ? ? ? ? ? ? = IGEP3_GPIO_LED0_RED, > - ? ? ? ? ? ? ? .default_trigger ? ? ? ?= "default-off" > - ? ? ? }, > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .name ? ? ? ? ? ? ? ? ? = "gpio-led:green:d0", > - ? ? ? ? ? ? ? .gpio ? ? ? ? ? ? ? ? ? = IGEP3_GPIO_LED0_GREEN, > - ? ? ? ? ? ? ? .default_trigger ? ? ? ?= "default-off", > - ? ? ? }, > - ? ? ? [2] = { > - ? ? ? ? ? ? ? .name ? ? ? ? ? ? ? ? ? = "gpio-led:red:d1", > - ? ? ? ? ? ? ? .gpio ? ? ? ? ? ? ? ? ? = IGEP3_GPIO_LED1_RED, > - ? ? ? ? ? ? ? .default_trigger ? ? ? ?= "default-off", > - ? ? ? }, > - ? ? ? [3] = { > - ? ? ? ? ? ? ? .name ? ? ? ? ? ? ? ? ? = "gpio-led:green:d1", > - ? ? ? ? ? ? ? .default_trigger ? ? ? ?= "heartbeat", > - ? ? ? ? ? ? ? .gpio ? ? ? ? ? ? ? ? ? = -EINVAL, /* gets replaced */ > - ? ? ? }, > -}; > - > -static struct gpio_led_platform_data igep3_led_pdata = { > - ? ? ? .leds ? ? ? ? ? = igep3_gpio_leds, > - ? ? ? .num_leds ? ? ? = ARRAY_SIZE(igep3_gpio_leds), > -}; > - > -static struct platform_device igep3_led_device = { > - ? ? ? ?.name ? = "leds-gpio", > - ? ? ? ?.id ? ? = -1, > - ? ? ? ?.dev ? ?= { > - ? ? ? ? ? ? ? ?.platform_data = &igep3_led_pdata, > - ? ? ? }, > -}; > - > -static void __init igep3_leds_init(void) > -{ > - ? ? ? platform_device_register(&igep3_led_device); > -} > - > -#else > -static struct gpio igep3_gpio_leds[] __initdata = { > - ? ? ? { IGEP3_GPIO_LED0_RED, ? GPIOF_OUT_INIT_HIGH, "gpio-led:red:d0" ? }, > - ? ? ? { IGEP3_GPIO_LED0_GREEN, GPIOF_OUT_INIT_HIGH, "gpio-led:green:d0" }, > - ? ? ? { IGEP3_GPIO_LED1_RED, ? GPIOF_OUT_INIT_HIGH, "gpio-led:red:d1" ? }, > -}; > - > -static inline void igep3_leds_init(void) > -{ > - ? ? ? if (gpio_request_array(igep3_gpio_leds, ARRAY_SIZE(igep3_gpio_leds))) { > - ? ? ? ? ? ? ? pr_warning("IGEP3: Could not obtain leds gpios\n"); > - ? ? ? ? ? ? ? return; > - ? ? ? } > - ? ? ? gpio_export(IGEP3_GPIO_LED0_RED, 0); > - ? ? ? gpio_export(IGEP3_GPIO_LED0_GREEN, 0); > - ? ? ? gpio_export(IGEP3_GPIO_LED1_RED, 0); > -} > -#endif > - > -static int igep3_twl4030_gpio_setup(struct device *dev, > - ? ? ? ? ? ? ? unsigned gpio, unsigned ngpio) > -{ > -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) > - ? ? ? int ret; > - > - ? ? ? /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ > - ? ? ? ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"gpio-led:green:d1"); > - ? ? ? if (ret) > - ? ? ? ? ? ? ? pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); > - ? ? ? else > - ? ? ? ? ? ? ? gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); > -#else > - ? ? ? igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; > -#endif > - ? ? ? /* gpio + 0 is "mmc0_cd" (input/IRQ) */ > - ? ? ? mmc[0].gpio_cd = gpio + 0; > - ? ? ? omap2_hsmmc_init(mmc); > - > - ? ? ? return 0; > -}; > - > -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { > - ? ? ? .gpio_base ? ? ?= OMAP_MAX_GPIO_LINES, > - ? ? ? .irq_base ? ? ? = TWL4030_GPIO_IRQ_BASE, > - ? ? ? .irq_end ? ? ? ?= TWL4030_GPIO_IRQ_END, > - ? ? ? .use_leds ? ? ? = true, > - ? ? ? .setup ? ? ? ? ?= igep3_twl4030_gpio_setup, > -}; > - > -static struct twl4030_usb_data igep3_twl4030_usb_data = { > - ? ? ? .usb_mode ? ? ? = T2_USB_MODE_ULPI, > -}; > - > -static struct platform_device *igep3_devices[] __initdata = { > - ? ? ? &igep3_vwlan_device, > -}; > - > -static void __init igep3_init_early(void) > -{ > - ? ? ? omap2_init_common_infrastructure(); > - ? ? ? omap2_init_common_devices(m65kxxxxam_sdrc_params, > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? m65kxxxxam_sdrc_params); > -} > - > -static struct twl4030_platform_data igep3_twl4030_pdata = { > - ? ? ? .irq_base ? ? ? = TWL4030_IRQ_BASE, > - ? ? ? .irq_end ? ? ? ?= TWL4030_IRQ_END, > - > - ? ? ? /* platform_data for children goes here */ > - ? ? ? .usb ? ? ? ? ? ?= &igep3_twl4030_usb_data, > - ? ? ? .gpio ? ? ? ? ? = &igep3_twl4030_gpio_pdata, > - ? ? ? .vmmc1 ? ? ? ? ?= &igep3_vmmc1, > - ? ? ? .vio ? ? ? ? ? ?= &igep3_vio, > -}; > - > -static int __init igep3_i2c_init(void) > -{ > - ? ? ? omap3_pmic_init("twl4030", &igep3_twl4030_pdata); > - > - ? ? ? return 0; > -} > - > -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) > -static struct gpio igep3_wlan_bt_gpios[] __initdata = { > - ? ? ? { IGEP3_GPIO_WIFI_NPD, ? ?GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" ? ?}, > - ? ? ? { IGEP3_GPIO_WIFI_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, > - ? ? ? { IGEP3_GPIO_BT_NRESET, ? GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" ? }, > -}; > - > -static void __init igep3_wifi_bt_init(void) > -{ > - ? ? ? int err; > - > - ? ? ? /* Configure MUX values for W-LAN + Bluetooth GPIO's */ > - ? ? ? omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); > - ? ? ? omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); > - ? ? ? omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); > - > - ? ? ? /* Set GPIO's for ?W-LAN + Bluetooth combo module */ > - ? ? ? err = gpio_request_array(igep3_wlan_bt_gpios, > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?ARRAY_SIZE(igep3_wlan_bt_gpios)); > - ? ? ? if (err) { > - ? ? ? ? ? ? ? pr_warning("IGEP3: Could not obtain WIFI/BT gpios\n"); > - ? ? ? ? ? ? ? return; > - ? ? ? } > - > - ? ? ? gpio_export(IGEP3_GPIO_WIFI_NPD, 0); > - ? ? ? gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); > - ? ? ? gpio_export(IGEP3_GPIO_BT_NRESET, 0); > - > - ? ? ? gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); > - ? ? ? udelay(10); > - ? ? ? gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); > -} > -#else > -void __init igep3_wifi_bt_init(void) {} > -#endif > - > -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { > - ? ? ? .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, > - ? ? ? .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, > - ? ? ? .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, > - > - ? ? ? .phy_reset = true, > - ? ? ? .reset_gpio_port[0] = -EINVAL, > - ? ? ? .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, > - ? ? ? .reset_gpio_port[2] = -EINVAL, > -}; > - > -#ifdef CONFIG_OMAP_MUX > -static struct omap_board_mux board_mux[] __initdata = { > - ? ? ? OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), > - ? ? ? { .reg_offset = OMAP_MUX_TERMINATOR }, > -}; > -#endif > - > -static void __init igep3_init(void) > -{ > - ? ? ? omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); > - > - ? ? ? /* Register I2C busses and drivers */ > - ? ? ? igep3_i2c_init(); > - ? ? ? platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); > - ? ? ? omap_serial_init(); > - ? ? ? usb_musb_init(NULL); > - ? ? ? usbhs_init(&usbhs_bdata); > - > - ? ? ? igep3_flash_init(); > - ? ? ? igep3_leds_init(); > - > - ? ? ? /* > - ? ? ? ?* WLAN-BT combo module from MuRata which has a Marvell WLAN > - ? ? ? ?* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. > - ? ? ? ?*/ > - ? ? ? igep3_wifi_bt_init(); > - > -} > - > -MACHINE_START(IGEP0030, "IGEP OMAP3 module") > - ? ? ? .boot_params ? ?= 0x80000100, > - ? ? ? .reserve ? ? ? ?= omap_reserve, > - ? ? ? .map_io ? ? ? ? = omap3_map_io, > - ? ? ? .init_early ? ? = igep3_init_early, > - ? ? ? .init_irq ? ? ? = omap_init_irq, > - ? ? ? .init_machine ? = igep3_init, > - ? ? ? .timer ? ? ? ? ?= &omap_timer, > -MACHINE_END > -- > 1.7.3.1 > > Acked-by: Enric Balletbo i Serra