* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. [not found] <0LN4003LQZBUSGU0@mailout4.samsung.com> @ 2011-06-21 11:50 ` Praveen Paneri 2011-06-21 11:51 ` Felipe Balbi 0 siblings, 1 reply; 7+ messages in thread From: Praveen Paneri @ 2011-06-21 11:50 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Jun 21, 2011 at 4:17 PM, PRAVEEN PANERI <p.paneri@samsung.com> wrote: > > Hi, > > On Tue, Jun 21, 2011 at 12:33:44PM +0530, p.paneri at samsung.com wrote: > > From: Praveen Paneri > > > > Adding dwc driver name in existing platform device > > to probe DWC OTG driver. > > Introduced otg_set_platdata function to pass platform data > > Added selectable config option to add DWC OTG driver for different > > machines. > > > > Signed-off-by: Praveen Paneri > > --- > >??arch/arm/plat-samsung/Kconfig???????? |????6 ++++++ > >??arch/arm/plat-samsung/Makefile????????|????1 + > >??arch/arm/plat-samsung/dev-usb-hsotg.c |?? 20 ++++++++++++++++++++ > >??3 files changed, 27 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > > index 4d79519..58ed8b1 100644 > > --- a/arch/arm/plat-samsung/Kconfig > > +++ b/arch/arm/plat-samsung/Kconfig > > @@ -227,6 +227,12 @@ config S3C_DEV_USB_HSOTG > >?? help > >?? ??Compile in platform device definition for USB high-speed OtG > > > > +config S3C_DEV_DWC_OTG > > + bool > > + help > > + ??Compile in platform device definition for DWC OTG. This > > + ??will make it selectable for different machines. > > + > >??config S3C_DEV_WDT > >?? bool > >?? default y if ARCH_S3C2410 > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > > index 53eb15b..785ca79 100644 > > --- a/arch/arm/plat-samsung/Makefile > > +++ b/arch/arm/plat-samsung/Makefile > > @@ -49,6 +49,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o > >??obj-y += dev-uart.o > >??obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o > >??obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o > > +obj-$(CONFIG_S3C_DEV_DWC_OTG) += dev-usb-hsotg.o > >??obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o > >??obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o > >??obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o > > diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c > > index 33a844a..7e6228b 100644 > > --- a/arch/arm/plat-samsung/dev-usb-hsotg.c > > +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c > > @@ -20,6 +20,8 @@ > >??#include > > > >??#include > > +#include > > +#include > > > >??static struct resource s3c_usb_hsotg_resources[] = { > >?? [0] = { > > @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { > >??static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); > > > >??struct platform_device s3c_device_usb_hsotg = { > > +#ifdef CONFIG_S3C_DEV_USB_HSOTG > >?? .name = "s3c-hsotg", > > +#endif > > +#ifdef CONFIG_S3C_DEV_DWC_OTG > > + .name = "dwc_otg", > > +#endif > > no, don't do that. See we're going through a big re-factor on the gadget > framework to allow multiple UDC drivers to be compiled as modules. The > idea is to be able to have distro-like kernels for embedded too. It can be build as a module but need to make necessary modifications in platform code. Will modify according to the gadget framework. Thanks for the comment. paneri > > Take a look at my gadget branch [1] and see how the gadget controllers > are modified to start allowing that. > > I also have patch to the Kconfig allowing all controllers to be enabled > as modules, I just need some more time to figure out one warning on the > renenesas controller. > > IOW, it's best to add both platform devices. Or move to device tree. > > -- > balbi > > > > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 11:50 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung Praveen Paneri @ 2011-06-21 11:51 ` Felipe Balbi 0 siblings, 0 replies; 7+ messages in thread From: Felipe Balbi @ 2011-06-21 11:51 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Jun 21, 2011 at 05:20:25PM +0530, Praveen Paneri wrote: > > > @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { > > >??static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); > > > > > >??struct platform_device s3c_device_usb_hsotg = { > > > +#ifdef CONFIG_S3C_DEV_USB_HSOTG > > >?? .name = "s3c-hsotg", > > > +#endif > > > +#ifdef CONFIG_S3C_DEV_DWC_OTG > > > + .name = "dwc_otg", > > > +#endif > > > > no, don't do that. See we're going through a big re-factor on the gadget > > framework to allow multiple UDC drivers to be compiled as modules. The > > idea is to be able to have distro-like kernels for embedded too. > It can be build as a module but need to make necessary modifications in > platform code. Will modify according to the gadget framework. can't you do runtime detection of which platform you're running on ? Then you add one or the other platform_device. But ifdeferry won't help you in the long run. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 490 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110621/a1b1e70c/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC. @ 2011-06-21 7:03 p.paneri at samsung.com 2011-06-21 7:03 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung p.paneri at samsung.com 0 siblings, 1 reply; 7+ messages in thread From: p.paneri at samsung.com @ 2011-06-21 7:03 UTC (permalink / raw) To: linux-arm-kernel From: Praveen Paneri <p.paneri@samsung.com> These patches modify DWC OTG driver for ARM and add it for ARM based SoCs. Currently it has been tested for Samsung's S5P6440. The development is still under process so these are not the best set of patches. They are just for review and not for merge. Intent of these patches is to show required modifications to make dwc_otg patches work on ARM. Following features are tested for basic functions on SMDK6440 board after modifications: OTG HOST: HID and mass-storage OTG DEVICE: mass-storage and adb This patch series is based on below dwc_otg patches http://patchwork.ozlabs.org/patch/89560/ To: Tirumala Marri, Felipe Balbi [PATCH 1/5] USB: DWC OTG: Modification in DWC OTG driver for ARM based SoCs To: Kukjin Kim [PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung [PATCH 3/5] ARM: SAMSUNG: Adding IO mapping for OTG [PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code [PATCH 5/5] ARM: S5P64x0: Adding OTG device and initialization code for smdk6440 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 7:03 [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC p.paneri at samsung.com @ 2011-06-21 7:03 ` p.paneri at samsung.com 2011-06-21 9:16 ` Felipe Balbi 2011-06-21 11:47 ` Sergei Shtylyov 0 siblings, 2 replies; 7+ messages in thread From: p.paneri at samsung.com @ 2011-06-21 7:03 UTC (permalink / raw) To: linux-arm-kernel From: Praveen Paneri <p.paneri@samsung.com> Adding dwc driver name in existing platform device to probe DWC OTG driver. Introduced otg_set_platdata function to pass platform data Added selectable config option to add DWC OTG driver for different machines. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> --- arch/arm/plat-samsung/Kconfig | 6 ++++++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-usb-hsotg.c | 20 ++++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-) diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 4d79519..58ed8b1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -227,6 +227,12 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG +config S3C_DEV_DWC_OTG + bool + help + Compile in platform device definition for DWC OTG. This + will make it selectable for different machines. + config S3C_DEV_WDT bool default y if ARCH_S3C2410 diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 53eb15b..785ca79 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_DWC_OTG) += dev-usb-hsotg.o obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c index 33a844a..7e6228b 100644 --- a/arch/arm/plat-samsung/dev-usb-hsotg.c +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c @@ -20,6 +20,8 @@ #include <mach/map.h> #include <plat/devs.h> +#include <plat/otg.h> +#include <plat/usb-phy.h> static struct resource s3c_usb_hsotg_resources[] = { [0] = { @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); struct platform_device s3c_device_usb_hsotg = { +#ifdef CONFIG_S3C_DEV_USB_HSOTG .name = "s3c-hsotg", +#endif +#ifdef CONFIG_S3C_DEV_DWC_OTG + .name = "dwc_otg", +#endif .id = -1, .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), .resource = s3c_usb_hsotg_resources, @@ -46,3 +53,16 @@ struct platform_device s3c_device_usb_hsotg = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +void __init s5p_otg_set_platdata(struct s5p_otg_platdata *pd) +{ + struct s5p_otg_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct s5p_otg_platdata), + &s3c_device_usb_hsotg); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 7:03 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung p.paneri at samsung.com @ 2011-06-21 9:16 ` Felipe Balbi 2011-06-21 11:47 ` Sergei Shtylyov 1 sibling, 0 replies; 7+ messages in thread From: Felipe Balbi @ 2011-06-21 9:16 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Jun 21, 2011 at 12:33:44PM +0530, p.paneri at samsung.com wrote: > From: Praveen Paneri <p.paneri@samsung.com> > > Adding dwc driver name in existing platform device > to probe DWC OTG driver. > Introduced otg_set_platdata function to pass platform data > Added selectable config option to add DWC OTG driver for different > machines. > > Signed-off-by: Praveen Paneri <p.paneri@samsung.com> > --- > arch/arm/plat-samsung/Kconfig | 6 ++++++ > arch/arm/plat-samsung/Makefile | 1 + > arch/arm/plat-samsung/dev-usb-hsotg.c | 20 ++++++++++++++++++++ > 3 files changed, 27 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > index 4d79519..58ed8b1 100644 > --- a/arch/arm/plat-samsung/Kconfig > +++ b/arch/arm/plat-samsung/Kconfig > @@ -227,6 +227,12 @@ config S3C_DEV_USB_HSOTG > help > Compile in platform device definition for USB high-speed OtG > > +config S3C_DEV_DWC_OTG > + bool > + help > + Compile in platform device definition for DWC OTG. This > + will make it selectable for different machines. > + > config S3C_DEV_WDT > bool > default y if ARCH_S3C2410 > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > index 53eb15b..785ca79 100644 > --- a/arch/arm/plat-samsung/Makefile > +++ b/arch/arm/plat-samsung/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o > obj-y += dev-uart.o > obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o > obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o > +obj-$(CONFIG_S3C_DEV_DWC_OTG) += dev-usb-hsotg.o > obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o > obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o > obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o > diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c > index 33a844a..7e6228b 100644 > --- a/arch/arm/plat-samsung/dev-usb-hsotg.c > +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c > @@ -20,6 +20,8 @@ > #include <mach/map.h> > > #include <plat/devs.h> > +#include <plat/otg.h> > +#include <plat/usb-phy.h> > > static struct resource s3c_usb_hsotg_resources[] = { > [0] = { > @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { > static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); > > struct platform_device s3c_device_usb_hsotg = { > +#ifdef CONFIG_S3C_DEV_USB_HSOTG > .name = "s3c-hsotg", > +#endif > +#ifdef CONFIG_S3C_DEV_DWC_OTG > + .name = "dwc_otg", > +#endif no, don't do that. See we're going through a big re-factor on the gadget framework to allow multiple UDC drivers to be compiled as modules. The idea is to be able to have distro-like kernels for embedded too. Take a look at my gadget branch [1] and see how the gadget controllers are modified to start allowing that. I also have patch to the Kconfig allowing all controllers to be enabled as modules, I just need some more time to figure out one warning on the renenesas controller. IOW, it's best to add both platform devices. Or move to device tree. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 490 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110621/a7ebcf4b/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 7:03 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung p.paneri at samsung.com 2011-06-21 9:16 ` Felipe Balbi @ 2011-06-21 11:47 ` Sergei Shtylyov 2011-06-21 11:49 ` Felipe Balbi 1 sibling, 1 reply; 7+ messages in thread From: Sergei Shtylyov @ 2011-06-21 11:47 UTC (permalink / raw) To: linux-arm-kernel Hello. On 21-06-2011 11:03, p.paneri at samsung.com wrote: > From: Praveen Paneri<p.paneri@samsung.com> > Adding dwc driver name in existing platform device > to probe DWC OTG driver. > Introduced otg_set_platdata function to pass platform data > Added selectable config option to add DWC OTG driver for different > machines. > Signed-off-by: Praveen Paneri<p.paneri@samsung.com> [...] > diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c > index 33a844a..7e6228b 100644 > --- a/arch/arm/plat-samsung/dev-usb-hsotg.c > +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c [...] > @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { > static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); > > struct platform_device s3c_device_usb_hsotg = { > +#ifdef CONFIG_S3C_DEV_USB_HSOTG > .name = "s3c-hsotg", > +#endif > +#ifdef CONFIG_S3C_DEV_DWC_OTG > + .name = "dwc_otg", > +#endif I'd done it as: +#if defined(CONFIG_S3C_DEV_USB_HSOTG) .name = "s3c-hsotg", +#elif defined(CONFIG_S3C_DEV_DWC_OTG) + .name = "dwc_otg", +#endif WBR, Sergei ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 11:47 ` Sergei Shtylyov @ 2011-06-21 11:49 ` Felipe Balbi 2011-06-21 12:00 ` Sergei Shtylyov 0 siblings, 1 reply; 7+ messages in thread From: Felipe Balbi @ 2011-06-21 11:49 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Jun 21, 2011 at 03:47:04PM +0400, Sergei Shtylyov wrote: > Hello. > > On 21-06-2011 11:03, p.paneri at samsung.com wrote: > > >From: Praveen Paneri<p.paneri@samsung.com> > > >Adding dwc driver name in existing platform device > >to probe DWC OTG driver. > >Introduced otg_set_platdata function to pass platform data > >Added selectable config option to add DWC OTG driver for different > >machines. > > >Signed-off-by: Praveen Paneri<p.paneri@samsung.com> > [...] > > >diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c > >index 33a844a..7e6228b 100644 > >--- a/arch/arm/plat-samsung/dev-usb-hsotg.c > >+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c > [...] > >@@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { > > static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); > > > > struct platform_device s3c_device_usb_hsotg = { > >+#ifdef CONFIG_S3C_DEV_USB_HSOTG > > .name = "s3c-hsotg", > >+#endif > >+#ifdef CONFIG_S3C_DEV_DWC_OTG > >+ .name = "dwc_otg", > >+#endif > > I'd done it as: > > +#if defined(CONFIG_S3C_DEV_USB_HSOTG) > .name = "s3c-hsotg", > +#elif defined(CONFIG_S3C_DEV_DWC_OTG) > + .name = "dwc_otg", > +#endif no... don't do that. How many times do I have to repeat ? No ifdefs!! we want both drivers to be able to be compiled as modules, so add both platform devices. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 490 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110621/fdefed2c/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung. 2011-06-21 11:49 ` Felipe Balbi @ 2011-06-21 12:00 ` Sergei Shtylyov 0 siblings, 0 replies; 7+ messages in thread From: Sergei Shtylyov @ 2011-06-21 12:00 UTC (permalink / raw) To: linux-arm-kernel Hello. On 21-06-2011 15:49, Felipe Balbi wrote: >>> From: Praveen Paneri<p.paneri@samsung.com> >>> Adding dwc driver name in existing platform device >>> to probe DWC OTG driver. >>> Introduced otg_set_platdata function to pass platform data >>> Added selectable config option to add DWC OTG driver for different >>> machines. >>> Signed-off-by: Praveen Paneri<p.paneri@samsung.com> >> [...] >>> diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c >>> index 33a844a..7e6228b 100644 >>> --- a/arch/arm/plat-samsung/dev-usb-hsotg.c >>> +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c >> [...] >>> @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = { >>> static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); >>> >>> struct platform_device s3c_device_usb_hsotg = { >>> +#ifdef CONFIG_S3C_DEV_USB_HSOTG >>> .name = "s3c-hsotg", >>> +#endif >>> +#ifdef CONFIG_S3C_DEV_DWC_OTG >>> + .name = "dwc_otg", >>> +#endif >> I'd done it as: >> +#if defined(CONFIG_S3C_DEV_USB_HSOTG) >> .name = "s3c-hsotg", >> +#elif defined(CONFIG_S3C_DEV_DWC_OTG) >> + .name = "dwc_otg", >> +#endif > no... don't do that. How many times do I have to repeat ? No ifdefs!! we > want both drivers to be able to be compiled as modules, so add both > platform devices. Sorry, hadn't seen your mail when replying. WBR, Sergei ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-06-21 12:00 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <0LN4003LQZBUSGU0@mailout4.samsung.com>
2011-06-21 11:50 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung Praveen Paneri
2011-06-21 11:51 ` Felipe Balbi
2011-06-21 7:03 [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC p.paneri at samsung.com
2011-06-21 7:03 ` [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung p.paneri at samsung.com
2011-06-21 9:16 ` Felipe Balbi
2011-06-21 11:47 ` Sergei Shtylyov
2011-06-21 11:49 ` Felipe Balbi
2011-06-21 12:00 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).