From mboxrd@z Thu Jan 1 00:00:00 1970 From: javier.martin@vista-silicon.com (javier Martin) Date: Wed, 18 May 2011 12:34:09 +0200 Subject: [PATCH 1/2] mt9p031: Add mt9p031 sensor driver. In-Reply-To: <201105171414.34179.ivan.nazarenko@gmail.com> References: <1305624528-5595-1-git-send-email-javier.martin@vista-silicon.com> <201105171414.34179.ivan.nazarenko@gmail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Ivan, On 17 May 2011 19:14, Ivan Nazarenko wrote: > Javier, > > I have been using the aptina patch (https://github.com/Aptina/BeagleBoard-xM) on beagleboard while waiting linux-media solve this mt9p031 issue. Now that you have something working, I would like to try it - but I would like to know what is the clock rate you actually drove the sensor. > > Reviewing your path, I suppose it is 54MHz, so you would be achieving some 10 full 5MPix frames/s from the sensor. Is that correct? (the aptina patch delivers less than 4 fps). > Yes, you are right. Whereas clock rate is set to 54MHz, with my oscilloscope I have measured 57 MHz. -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com