From mboxrd@z Thu Jan  1 00:00:00 1970
From: linus.walleij@linaro.org (Linus Walleij)
Date: Wed, 20 Apr 2011 14:32:35 +0200
Subject: [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib
In-Reply-To: <BANLkTimqpP2k1tBvRL0BXs9E-Q=3bh0C7Q@mail.gmail.com>
References: <1303076273-8093-1-git-send-email-linus.walleij@stericsson.com>
	<3F5641E3-C443-4541-9FDA-24D215597C1F@niasdigital.com>
	<20110418091902.13345132@lxorguk.ukuu.org.uk>
	<92FFDB9F-37F1-4618-A53D-FEF4151A4953@niasdigital.com>
	<20110418132629.12d9a106@lxorguk.ukuu.org.uk>
	<6C3F739A-A157-4796-9572-C6B0FAC2565E@niasdigital.com>
	<20110419093855.36910400@lxorguk.ukuu.org.uk>
	<BANLkTimqpP2k1tBvRL0BXs9E-Q=3bh0C7Q@mail.gmail.com>
Message-ID: <BANLkTimfkpjQ9DoYKRTVwyvtPRccO+RwpA@mail.gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

2011/4/19 Kyungmin Park <kmpark@infradead.org>:

> One more consideration, not mentioned previous time, is that pin
> configuration for power down mode.
> Samsung SoCs has retention GPIO configurations at sleep (suspend)
> mode. and restore it at resume time.
> it's need to reduce power and proper operation after suspend.

Isn't this supposed to be handled by runtime_pm hooks inside
your GPIO driver rather than by someone else talking to
the GPIO driver trying to spool/unspool the state from the
outside in some other place?

Or am I getting things backwards now...?

Yours,
Linus Walleij