linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: amit.kachhap@linaro.org (Amit Kachhap)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC] Add Arm cpu topology definition
Date: Thu, 16 Jun 2011 17:25:06 +0530	[thread overview]
Message-ID: <BANLkTinzar2Ex-A4tCMz6JJSHoGvMAoTBg@mail.gmail.com> (raw)
In-Reply-To: <BANLkTinRGRUxKB=C_2Y2F93czWScEUo+Jw@mail.gmail.com>

I have some doubts about the bit fields of the MPIDR register.
Comments added below.
On 16 June 2011 14:19, Vincent Guittot <vincent.guittot@linaro.org> wrote:
> The affinity between Arm processors is defined in the MPIDR register.
> We can identify which processors are in the same cluster,
> and which ones have performance interdependency. The cpu topology
> ?of an Arm platform can be set thanks to this register and this topology
> is then used by sched_mc and sched_smt.
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
> ?arch/arm/Kconfig ? ? ? ? ? ? ? ?| ? 26 ++++++++
> ?arch/arm/include/asm/topology.h | ? 33 ++++++++++
> ?arch/arm/kernel/Makefile ? ? ? ?| ? ?1 +
> ?arch/arm/kernel/smp.c ? ? ? ? ? | ? ?6 ++
> ?arch/arm/kernel/topology.c ? ? ?| ?133 +++++++++++++++++++++++++++++++++++++++
> ?5 files changed, 199 insertions(+), 0 deletions(-)
> ?create mode 100644 arch/arm/kernel/topology.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 9adc278..bacf9af 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -219,6 +219,24 @@ source "kernel/Kconfig.freezer"
>
> ?menu "System Type"
>
> +config SCHED_MC
> + ? ? ? bool "Multi-core scheduler support"
> + ? ? ? depends on SMP && ARM_CPU_TOPOLOGY
> + ? ? ? default n
> + ? ? ? help
> + ? ? ? ? Multi-core scheduler support improves the CPU scheduler's decision
> + ? ? ? ? making when dealing with multi-core CPU chips at a cost of slightly
> + ? ? ? ? increased overhead in some places. If unsure say N here.
> +
> +config SCHED_SMT
> + ? ? ? bool "SMT scheduler support"
> + ? ? ? depends on SMP && ARM_CPU_TOPOLOGY
> + ? ? ? default n
> + ? ? ? help
> + ? ? ? ? Improves the CPU scheduler's decision making when dealing with
> + ? ? ? ? MultiThreading at a cost of slightly increased overhead in some
> + ? ? ? ? places. If unsure say N here.
> +
> ?config MMU
> ? ? ? ?bool "MMU-based Paged Memory Management Support"
> ? ? ? ?default y
> @@ -1062,6 +1080,14 @@ if !MMU
> ?source "arch/arm/Kconfig-nommu"
> ?endif
>
> +config ARM_CPU_TOPOLOGY
> + ? ? ? bool "Support cpu topology definition"
> + ? ? ? depends on SMP && CPU_V7
> + ? ? ? help
> + ? ? ? ? Support Arm cpu topology definition. The MPIDR register defines
> + ? ? ? ? affinity between processors which is used to set the cpu
> + ? ? ? ? topology of an Arm System.
> +
> ?config ARM_ERRATA_411920
> ? ? ? ?bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
> ? ? ? ?depends on CPU_V6 || CPU_V6K
> diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
> index accbd7c..cb90d0a 100644
> --- a/arch/arm/include/asm/topology.h
> +++ b/arch/arm/include/asm/topology.h
> @@ -1,6 +1,39 @@
> ?#ifndef _ASM_ARM_TOPOLOGY_H
> ?#define _ASM_ARM_TOPOLOGY_H
>
> +#ifdef CONFIG_ARM_CPU_TOPOLOGY
> +
> +#include <linux/cpumask.h>
> +
> +struct cputopo_arm {
> + ? ? ? int thread_id;
> + ? ? ? int core_id;
> + ? ? ? int socket_id;
> + ? ? ? cpumask_t thread_sibling;
> + ? ? ? cpumask_t core_sibling;
> +};
> +
> +extern struct cputopo_arm cpu_topology[NR_CPUS];
> +
> +#define topology_physical_package_id(cpu) ? ? ?(cpu_topology[cpu].socket_id)
> +#define topology_core_id(cpu) ? ? ? ? ?(cpu_topology[cpu].core_id)
> +#define topology_core_cpumask(cpu) ? ? (&(cpu_topology[cpu].core_sibling))
> +#define topology_thread_cpumask(cpu) ? (&(cpu_topology[cpu].thread_sibling))
> +
> +#define mc_capable() ? (cpu_topology[0].socket_id != -1)
> +#define smt_capable() ?(cpu_topology[0].thread_id != -1)
> +
> +void init_cpu_topology(void);
> +void store_cpu_topology(unsigned int cpuid);
> +const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
> +
> +#else
> +
> +#define init_cpu_topology() {};
> +#define store_cpu_topology(cpuid) {};
> +
> +#endif
> +
> ?#include <asm-generic/topology.h>
>
> ?#endif /* _ASM_ARM_TOPOLOGY_H */
> diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
> index a5b31af..816a481 100644
> --- a/arch/arm/kernel/Makefile
> +++ b/arch/arm/kernel/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_IWMMXT) ? ? ? ? ?+= iwmmxt.o
> ?obj-$(CONFIG_CPU_HAS_PMU) ? ? ?+= pmu.o
> ?obj-$(CONFIG_HW_PERF_EVENTS) ? += perf_event.o
> ?AFLAGS_iwmmxt.o ? ? ? ? ? ? ? ? ? ? ? ?:= -Wa,-mcpu=iwmmxt
> +obj-$(CONFIG_ARM_CPU_TOPOLOGY) ?+= topology.o
>
> ?ifneq ($(CONFIG_ARCH_EBSA110),y)
> ? obj-y ? ? ? ? ? ? ? ?+= io.o
> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
> index 344e52b..3e8dc3b 100644
> --- a/arch/arm/kernel/smp.c
> +++ b/arch/arm/kernel/smp.c
> @@ -31,6 +31,7 @@
> ?#include <asm/cacheflush.h>
> ?#include <asm/cpu.h>
> ?#include <asm/cputype.h>
> +#include <asm/topology.h>
> ?#include <asm/mmu_context.h>
> ?#include <asm/pgtable.h>
> ?#include <asm/pgalloc.h>
> @@ -268,6 +269,9 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
> ? ? ? ?struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
>
> ? ? ? ?cpu_info->loops_per_jiffy = loops_per_jiffy;
> +
> + ? ? ? store_cpu_topology(cpuid);
> +
> ?}
>
> ?/*
> @@ -354,6 +358,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> ?{
> ? ? ? ?unsigned int ncores = num_possible_cpus();
>
> + ? ? ? init_cpu_topology();
> +
> ? ? ? ?smp_store_cpu_info(smp_processor_id());
>
> ? ? ? ?/*
> diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
> new file mode 100644
> index 0000000..d61723c
> --- /dev/null
> +++ b/arch/arm/kernel/topology.c
> @@ -0,0 +1,133 @@
> +/*
> + * arch/arm/kernel/topology.c
> + *
> + * Copyright (C) 2011 ?vincent.guittot at linaro.org
> + *
> + * based on arch/sh/kernel/topology.c
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. ?See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
> +#include <linux/init.h>
> +#include <linux/percpu.h>
> +#include <linux/node.h>
> +#include <linux/nodemask.h>
> +#include <linux/sched.h>
> +
> +#include <asm/cacheflush.h>
> +#include <asm/topology.h>
> +
> +#define hard_smp_mpidr() \
> + ? ? ? ({ \
> + ? ? ? ? ? ? ? unsigned int cpunum; \
> + ? ? ? ? ? ? ? __asm__("mrc p15, 0, %0, c0, c0, 5" ? ? \
> + ? ? ? ? ? ? ? ? ? ? ? : "=r" (cpunum)); \
> + ? ? ? ? ? ? ? cpunum; \
> + ? ? ? })
> +
> +struct cputopo_arm cpu_topology[NR_CPUS];
> +
> +const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
> +{
> + ? ? ? return &(cpu_topology[cpu].core_sibling);
> +}
> +
> +/*
> + * store_cpu_topology is called at boot when only one cpu is running
> + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
> + * which prevents simultaneous write access to cpu_topology array
> + */
> +void store_cpu_topology(unsigned int cpuid)
> +{
> + ? ? ? struct cputopo_arm *cpuid_topo = &(cpu_topology[cpuid]);
> + ? ? ? unsigned int mpidr;
> + ? ? ? unsigned int cpu;
> +
> + ? ? ? /* If the cpu topology has been already set, just return */
> + ? ? ? if (cpuid_topo->core_id != -1)
> + ? ? ? ? ? ? ? return;
> +
> + ? ? ? mpidr = hard_smp_mpidr();
> +
> + ? ? ? /* create cpu topology mapping */
> + ? ? ? if (mpidr & (0x3 << 30)) {

I checked the A9 reference manual. It says bit 30 if 0 denotes that processor is
part of multiprocessor system.


> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* This is a multiprocessor system
> + ? ? ? ? ? ? ? ?* multiprocessor format & multiprocessor mode field are set
> + ? ? ? ? ? ? ? ?*/
> +
> + ? ? ? ? ? ? ? if (mpidr & (0x1 << 24)) {
> + ? ? ? ? ? ? ? ? ? ? ? /* core performance interdependency */
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->thread_id = (mpidr & 0x3);
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->core_id = ?((mpidr >> 8) & 0xF);
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->socket_id = ((mpidr >> 16) & 0xFF);
> + ? ? ? ? ? ? ? } else {
> + ? ? ? ? ? ? ? ? ? ? ? /* normal core interdependency */
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->thread_id = -1;
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->core_id = (mpidr & 0x3);
> + ? ? ? ? ? ? ? ? ? ? ? cpuid_topo->socket_id = ((mpidr >> 8) & 0xF);
> + ? ? ? ? ? ? ? }
> + ? ? ? } else {
> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* This is an uniprocessor system
> + ? ? ? ? ? ? ? ?* we are in multiprocessor format but uniprocessor system
> + ? ? ? ? ? ? ? ?* or in the old uniprocessor format
> + ? ? ? ? ? ? ? ?*/
> +
> + ? ? ? ? ? ? ? cpuid_topo->thread_id = -1;
> + ? ? ? ? ? ? ? cpuid_topo->core_id = 0;
> + ? ? ? ? ? ? ? cpuid_topo->socket_id = -1;
> + ? ? ? }
> +
> + ? ? ? /* update core and thread sibling masks */
> + ? ? ? for_each_possible_cpu(cpu) {
> + ? ? ? ? ? ? ? struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
> +
> + ? ? ? ? ? ? ? if (cpuid_topo->socket_id == cpu_topo->socket_id) {
> + ? ? ? ? ? ? ? ? ? ? ? cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
> + ? ? ? ? ? ? ? ? ? ? ? if (cpu != cpuid)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cpumask_set_cpu(cpu,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &cpuid_topo->core_sibling);
> +
> + ? ? ? ? ? ? ? ? ? ? ? if (cpuid_topo->core_id == cpu_topo->core_id) {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cpumask_set_cpu(cpuid,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &cpu_topo->thread_sibling);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? if (cpu != cpuid)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cpumask_set_cpu(cpu,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &cpuid_topo->thread_sibling);
> + ? ? ? ? ? ? ? ? ? ? ? }
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> + ? ? ? smp_wmb();
> +
> + ? ? ? printk(KERN_INFO "cpu %u : thread %d cpu %d, socket %d, mpidr %x\n",
> + ? ? ? ? ? ? ? cpuid, cpu_topology[cpuid].thread_id,
> + ? ? ? ? ? ? ? cpu_topology[cpuid].core_id,
> + ? ? ? ? ? ? ? cpu_topology[cpuid].socket_id, mpidr);
> +
> +}
> +
> +/*
> + * init_cpu_topology is called at boot when only one cpu is running
> + * which prevent simultaneous write access to cpu_topology array
> + */
> +void init_cpu_topology(void)
> +{
> + ? ? ? unsigned int cpu;
> +
> + ? ? ? /* init core mask */
> + ? ? ? for_each_possible_cpu(cpu) {
> + ? ? ? ? ? ? ? struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
> +
> + ? ? ? ? ? ? ? cpu_topo->thread_id = -1;
> + ? ? ? ? ? ? ? cpu_topo->core_id = ?-1;
> + ? ? ? ? ? ? ? cpu_topo->socket_id = -1;
> + ? ? ? ? ? ? ? cpumask_clear(&cpu_topo->core_sibling);
> + ? ? ? ? ? ? ? cpumask_clear(&cpu_topo->thread_sibling);
> + ? ? ? }
> + ? ? ? smp_wmb();
> +}
> --
> 1.7.4.1
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev at lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>

  parent reply	other threads:[~2011-06-16 11:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-16  8:49 [RFC] Add Arm cpu topology definition Vincent Guittot
2011-06-16  8:55 ` Samuel Thibault
2011-06-16  9:44   ` Vincent Guittot
2011-06-16  9:47     ` Samuel Thibault
2011-06-16  9:56       ` Vincent Guittot
2011-06-16 10:49 ` Daniel Lezcano
2011-06-16 12:05   ` Vincent Guittot
2011-06-16 11:48 ` Amit Kucheria
2011-06-16 12:30   ` Vincent Guittot
2011-06-16 11:55 ` Amit Kachhap [this message]
2011-06-16 12:10   ` Vincent Guittot
2011-06-16 13:24 ` Christian Robottom Reis
2011-06-16 13:48   ` Vincent Guittot
2011-06-16 19:40 ` Stephen Boyd
2011-06-17  6:54   ` Vincent Guittot
2011-06-21 20:36     ` Stephen Boyd
2011-06-22  9:17       ` Catalin Marinas
2011-06-22 10:19         ` Amit Kucheria
2011-06-16 21:13 ` Russell King - ARM Linux
2011-06-17  7:43   ` Vincent Guittot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BANLkTinzar2Ex-A4tCMz6JJSHoGvMAoTBg@mail.gmail.com \
    --to=amit.kachhap@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).