From mboxrd@z Thu Jan 1 00:00:00 1970 From: zumeng.chen@gmail.com (Zumeng Chen) Date: Tue, 12 Jun 2012 10:30:30 +0800 Subject: [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set In-Reply-To: <4FD608C5.9000900@ti.com> References: <1339423216-1323-1-git-send-email-zumeng.chen@gmail.com> <1339423216-1323-5-git-send-email-zumeng.chen@gmail.com> <4FD608C5.9000900@ti.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org 2012/6/11 Jon Hunter > > On 06/11/2012 09:00 AM, Zumeng Chen wrote: > > A typo fix for this cosmetic change and mute a failed message from > > a unnecessary setting of some parent clk for usbhs_omap on OMAP3EVM. > > > > Signed-off-by: Zumeng Chen > > --- > > drivers/mfd/omap-usb-host.c | 4 +++- > > 1 files changed, 3 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c > > index 7e96bb2..9aaaf3c 100644 > > --- a/drivers/mfd/omap-usb-host.c > > +++ b/drivers/mfd/omap-usb-host.c > > @@ -698,8 +698,9 @@ static int __devinit usbhs_omap_probe(struct > platform_device *pdev) > > goto err_usbtll_p2_fck; > > } > > > > +#ifndef CONFIG_MACH_OMAP3EVM > > + /* for OMAP3 , the clk set parent fails */ > > if (is_ehci_phy_mode(pdata->port_mode[0])) { > > - /* for OMAP3 , the clk set paretn fails */ > > ret = clk_set_parent(omap->utmi_p1_fck, > > omap->xclk60mhsp1_ck); > > if (ret != 0) > > This begs the question, why is port_mode[0] set to ehci phy mode if this > is failing? Something does not seem right here but this does not look > like the right fix. > Actually, for omap3530evm, there is only port-mode[1] is valid, so port_mode[0] will be skipped by "if". And it will report "xclk60mhsp2_ck set parent failed" But why I bracket both of them, because, both xclk60mhsp2_ck and xclk60mhsp1_ck have dummy_ck clk for omap3530evm. So we can skip them directly. Regards, Zumeng > > Cheers > Jon > -------------- next part -------------- An HTML attachment was scrubbed... URL: