* [PATCH v6 0/8] Add support for Tegra Activity Monitor [not found] <78905871.274971426655422042.JavaMail.weblogic@epmlwas07d> @ 2015-03-18 6:27 ` Tomeu Vizoso 2015-03-23 7:35 ` Alexandre Courbot 0 siblings, 1 reply; 3+ messages in thread From: Tomeu Vizoso @ 2015-03-18 6:27 UTC (permalink / raw) To: linux-arm-kernel On 18 March 2015 at 06:10, MyungJoo Ham <myungjoo.ham@samsung.com> wrote: >> Hello, >> >> something happened during the last cycle and an old version of the devfreq >> driver was merged. >> >> This thread contains patches that bring it up to date to the last submitted >> version and also incorporates the feedback that that version received, plus >> some other small fixes and improvements that came up during rebase and >> testing. >> >> These patches implement support for setting the rate of the EMC clock based on >> stats collected from the ACTMON, a piece of hw in the Tegra124 that counts >> memory accesses (among others). >> >> It depends on the following in-flight patches: >> >> * EMC driver: http://thread.gmane.org/gmane.linux.kernel/1907035 >> * CPUFreq driver: http://thread.gmane.org/gmane.linux.kernel/1897078 >> >> I have pushed a branch here for testing: >> >> http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=actmon-v6 >> >> Regards, >> >> Tomeu >> >> Tomeu Vizoso (8): >> of: Add binding for NVIDIA Tegra ACTMON node >> PM / devfreq: tegra: Update to v5 of the submitted patches >> clk: tegra: Have EMC clock implement determine_rate() >> PM / devfreq: tegra: Use clock rate constraints >> PM / devfreq: tegra: remove operating-points >> PM / devfreq: tegra: Set drvdata before enabling the irq >> PM / devfreq: tegra: Enable interrupts after resuming the devfreq >> monitor >> ARM: tegra: Add Tegra124 ACTMON support > > Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> > for all PM / devfreq patches (2, 4, 5, 6, 7) > And merged in for-rc tree with a little modification. Thanks. Though that's fine with me, I was wondering if Mikko or Alexandre would have any comments on the changes, even if they are small regarding what they already reviewed. > In the patch 2/8, I would like to add "const" in Line 748. > Would it be fine with you? Yes, thanks, that's fine. Regards, Tomeu > (You may look at: https://git.kernel.org/cgit/linux/kernel/git/mzx/devfreq.git/log/?h=for-rc ) > > > The diff after applying all 2/8 to 7/8 will be: > > diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c > index 0d1edd5..8e633a6 100644 > --- a/drivers/devfreq/tegra-devfreq.c > +++ b/drivers/devfreq/tegra-devfreq.c > @@ -740,7 +740,7 @@ static int tegra_devfreq_remove(struct platform_device *pdev) > return 0; > } > > -static struct of_device_id tegra_devfreq_of_match[] = { > +static const struct of_device_id tegra_devfreq_of_match[] = { > { .compatible = "nvidia,tegra124-actmon" }, > { }, > }; > > >> >> .../devicetree/bindings/arm/tegra/actmon.txt | 28 ++ >> arch/arm/boot/dts/tegra124.dtsi | 11 + >> drivers/clk/tegra/clk-emc.c | 19 +- >> drivers/devfreq/tegra-devfreq.c | 480 +++++++++++---------- >> 4 files changed, 316 insertions(+), 222 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt >> >> -- >> 2.1.0 >> ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v6 0/8] Add support for Tegra Activity Monitor 2015-03-18 6:27 ` [PATCH v6 0/8] Add support for Tegra Activity Monitor Tomeu Vizoso @ 2015-03-23 7:35 ` Alexandre Courbot 0 siblings, 0 replies; 3+ messages in thread From: Alexandre Courbot @ 2015-03-23 7:35 UTC (permalink / raw) To: linux-arm-kernel On Wed, Mar 18, 2015 at 3:27 PM, Tomeu Vizoso <tomeu.vizoso@collabora.com> wrote: > On 18 March 2015 at 06:10, MyungJoo Ham <myungjoo.ham@samsung.com> wrote: >>> Hello, >>> >>> something happened during the last cycle and an old version of the devfreq >>> driver was merged. >>> >>> This thread contains patches that bring it up to date to the last submitted >>> version and also incorporates the feedback that that version received, plus >>> some other small fixes and improvements that came up during rebase and >>> testing. >>> >>> These patches implement support for setting the rate of the EMC clock based on >>> stats collected from the ACTMON, a piece of hw in the Tegra124 that counts >>> memory accesses (among others). >>> >>> It depends on the following in-flight patches: >>> >>> * EMC driver: http://thread.gmane.org/gmane.linux.kernel/1907035 >>> * CPUFreq driver: http://thread.gmane.org/gmane.linux.kernel/1897078 >>> >>> I have pushed a branch here for testing: >>> >>> http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=actmon-v6 >>> >>> Regards, >>> >>> Tomeu >>> >>> Tomeu Vizoso (8): >>> of: Add binding for NVIDIA Tegra ACTMON node >>> PM / devfreq: tegra: Update to v5 of the submitted patches >>> clk: tegra: Have EMC clock implement determine_rate() >>> PM / devfreq: tegra: Use clock rate constraints >>> PM / devfreq: tegra: remove operating-points >>> PM / devfreq: tegra: Set drvdata before enabling the irq >>> PM / devfreq: tegra: Enable interrupts after resuming the devfreq >>> monitor >>> ARM: tegra: Add Tegra124 ACTMON support >> >> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> >> for all PM / devfreq patches (2, 4, 5, 6, 7) >> And merged in for-rc tree with a little modification. > > Thanks. Though that's fine with me, I was wondering if Mikko or > Alexandre would have any comments on the changes, even if they are > small regarding what they already reviewed. After a quick look I think I'm good with it. I will try to look in further detail. If there is anything wrong, we can fix it with fixup patches, since what has been merged is good stuff already! I guess it would now be interesting to look at the watermark support for devfreq. I am not sure if anything is happening to it? Arto? https://lkml.org/lkml/2014/12/5/262 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v6 0/8] Add support for Tegra Activity Monitor @ 2015-03-17 9:36 Tomeu Vizoso 0 siblings, 0 replies; 3+ messages in thread From: Tomeu Vizoso @ 2015-03-17 9:36 UTC (permalink / raw) To: linux-arm-kernel Hello, something happened during the last cycle and an old version of the devfreq driver was merged. This thread contains patches that bring it up to date to the last submitted version and also incorporates the feedback that that version received, plus some other small fixes and improvements that came up during rebase and testing. These patches implement support for setting the rate of the EMC clock based on stats collected from the ACTMON, a piece of hw in the Tegra124 that counts memory accesses (among others). It depends on the following in-flight patches: * EMC driver: http://thread.gmane.org/gmane.linux.kernel/1907035 * CPUFreq driver: http://thread.gmane.org/gmane.linux.kernel/1897078 I have pushed a branch here for testing: http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=actmon-v6 Regards, Tomeu Tomeu Vizoso (8): of: Add binding for NVIDIA Tegra ACTMON node PM / devfreq: tegra: Update to v5 of the submitted patches clk: tegra: Have EMC clock implement determine_rate() PM / devfreq: tegra: Use clock rate constraints PM / devfreq: tegra: remove operating-points PM / devfreq: tegra: Set drvdata before enabling the irq PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitor ARM: tegra: Add Tegra124 ACTMON support .../devicetree/bindings/arm/tegra/actmon.txt | 28 ++ arch/arm/boot/dts/tegra124.dtsi | 11 + drivers/clk/tegra/clk-emc.c | 19 +- drivers/devfreq/tegra-devfreq.c | 480 +++++++++++---------- 4 files changed, 316 insertions(+), 222 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt -- 2.1.0 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-03-23 7:35 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <78905871.274971426655422042.JavaMail.weblogic@epmlwas07d> 2015-03-18 6:27 ` [PATCH v6 0/8] Add support for Tegra Activity Monitor Tomeu Vizoso 2015-03-23 7:35 ` Alexandre Courbot 2015-03-17 9:36 Tomeu Vizoso
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).