[PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Alexander Shiyan]

This patch provides rewritten driver for CLPS711X GPIO which uses
generic GPIO code.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/gpio/Kconfig         |   5 +-
 drivers/gpio/gpio-clps711x.c | 226 +++++++++++--------------------------------
 2 files changed, 63 insertions(+), 168 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6899afb..c6cea12 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -109,8 +109,11 @@ config GPIO_MAX730X
 comment "Memory mapped GPIO drivers:"
 
 config GPIO_CLPS711X
-	def_bool y
+	tristate "CLPS711X GPIO support"
 	depends on ARCH_CLPS711X
+	select GPIO_GENERIC
+	help
+	  Say yes here to support GPIO on CLPS711X SoCs.
 
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index ce63b75..6ce8a8c 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -1,7 +1,7 @@
 /*
  *  CLPS711X GPIO driver
  *
- *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *  Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -9,191 +9,83 @@
  * (at your option) any later version.
  */
 
-#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-
-#define CLPS711X_GPIO_PORTS	5
-#define CLPS711X_GPIO_NAME	"gpio-clps711x"
-
-struct clps711x_gpio {
-	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
-	spinlock_t		lock;
-};
-
-static void __iomem *clps711x_ports[] = {
-	CLPS711X_VIRT_BASE + PADR,
-	CLPS711X_VIRT_BASE + PBDR,
-	CLPS711X_VIRT_BASE + PCDR,
-	CLPS711X_VIRT_BASE + PDDR,
-	CLPS711X_VIRT_BASE + PEDR,
-};
-
-static void __iomem *clps711x_pdirs[] = {
-	CLPS711X_VIRT_BASE + PADDR,
-	CLPS711X_VIRT_BASE + PBDDR,
-	CLPS711X_VIRT_BASE + PCDDR,
-	CLPS711X_VIRT_BASE + PDDDR,
-	CLPS711X_VIRT_BASE + PEDDR,
-};
-
-#define clps711x_port(x)	clps711x_ports[x->base / 8]
-#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
-
-static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+static int clps711x_gpio_probe(struct platform_device *pdev)
 {
-	return !!(readb(clps711x_port(chip)) & (1 << offset));
-}
+	void __iomem *dat, *dir;
+	struct bgpio_chip *bgc;
+	struct resource *res;
+	int err, id = pdev->id;
 
-static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
-			      int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	if ((id < 0) || (id > 4))
+		return -ENODEV;
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-}
-
-static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
-
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
-}
+	bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
+	if (!bgc)
+		return -ENOMEM;
 
-static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
-				 int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dat = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	dir = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	switch (id) {
+	case 3:
+		/* PORTD is inverted logic for direction register */
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 NULL, dir, 0);
+		break;
+	default:
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 dir, NULL, 0);
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	if (err)
+		return err;
 
-	return 0;
-}
-
-static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	switch (id) {
+	case 4:
+		/* PORTE is 3 lines only */
+		bgc->gc.ngpio = 3;
+		break;
+	default:
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	bgc->gc.base = id * 8;
+	platform_set_drvdata(pdev, bgc);
 
-	return 0;
+	return gpiochip_add(&bgc->gc);
 }
 
-static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
-				     int value)
+static int clps711x_gpio_remove(struct platform_device *pdev)
 {
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	struct bgpio_chip *bgc = platform_get_drvdata(pdev);
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
+	return bgpio_remove(bgc);
 }
 
-static struct {
-	char	*name;
-	int	nr;
-	int	inv_dir;
-} clps711x_gpio_ports[] __initconst = {
-	{ "PORTA", 8, 0, },
-	{ "PORTB", 8, 0, },
-	{ "PORTC", 8, 0, },
-	{ "PORTD", 8, 1, },
-	{ "PORTE", 3, 0, },
+static struct platform_driver clps711x_gpio_driver = {
+	.driver	= {
+		.name	= "clps711x-gpio",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= clps711x_gpio_probe,
+	.remove	= clps711x_gpio_remove,
 };
+module_platform_driver(clps711x_gpio_driver);
 
-static int __init gpio_clps711x_init(void)
-{
-	int i;
-	struct platform_device *pdev;
-	struct clps711x_gpio *gpio;
-
-	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
-	if (!pdev) {
-		pr_err("Cannot create platform device: %s\n",
-		       CLPS711X_GPIO_NAME);
-		return -ENOMEM;
-	}
-
-	platform_device_add(pdev);
-
-	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
-			    GFP_KERNEL);
-	if (!gpio) {
-		dev_err(&pdev->dev, "GPIO allocating memory error\n");
-		platform_device_unregister(pdev);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	spin_lock_init(&gpio->lock);
-
-	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
-		gpio->chip[i].owner		= THIS_MODULE;
-		gpio->chip[i].dev		= &pdev->dev;
-		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
-		gpio->chip[i].base		= i * 8;
-		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
-		gpio->chip[i].get		= gpio_clps711x_get;
-		gpio->chip[i].set		= gpio_clps711x_set;
-		if (!clps711x_gpio_ports[i].inv_dir) {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out;
-		} else {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
-		}
-		WARN_ON(gpiochip_add(&gpio->chip[i]));
-	}
-
-	dev_info(&pdev->dev, "GPIO driver initialized\n");
-
-	return 0;
-}
-arch_initcall(gpio_clps711x_init);
-
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
 MODULE_DESCRIPTION("CLPS711X GPIO driver");
-- 
1.8.1.5

[PATCH v2 2/3] ARM: clps711x: Re-add GPIO support

[Alexander Shiyan]

arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/Makefile         |  5 +---
 arch/arm/mach-clps711x/board-autcpu12.c |  2 ++
 arch/arm/mach-clps711x/board-cdb89712.c |  2 ++
 arch/arm/mach-clps711x/board-edb7211.c  |  7 +++++
 arch/arm/mach-clps711x/board-p720t.c    | 10 ++++---
 arch/arm/mach-clps711x/devices.c        | 48 +++++++++++++++++++++++++++++++++
 arch/arm/mach-clps711x/devices.h        | 12 +++++++++
 7 files changed, 78 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/mach-clps711x/devices.c
 create mode 100644 arch/arm/mach-clps711x/devices.h

diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 992995a..f30ed2b 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,10 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= common.o
-obj-m			:=
-obj-n			:=
-obj-			:=
+obj-y				:= common.o devices.o
 
 obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f385847..1e22cb4 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -43,6 +43,7 @@
 #include <mach/autcpu12.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
@@ -149,6 +150,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
 
 static void __init autcpu12_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
 					ARRAY_SIZE(autcpu12_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index baab7da..a80ae57 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -39,6 +39,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define CDB89712_CS8900_IRQ	(IRQ_EINT3)
@@ -127,6 +128,7 @@ static struct platform_device cdb89712_sram_pdev __initdata = {
 
 static void __init cdb89712_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register(&cdb89712_flash_pdev);
 	platform_device_register(&cdb89712_bootrom_pdev);
 	platform_device_register(&cdb89712_sram_pdev);
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 5f928e9..e1c5573 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define VIDEORAM_SIZE		SZ_128K
 
@@ -151,6 +152,11 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 static void __init edb7211_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init edb7211_init_late(void)
+{
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
 
 	platform_device_register(&edb7211_flash_pdev);
@@ -175,6 +181,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
+	.init_late	= edb7211_init_late,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 8d3ee67..48d0737 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -43,6 +43,7 @@
 #include <video/platform_lcd.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define P720T_USERLED		CLPS711X_GPIO(3, 0)
 #define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
@@ -199,6 +200,11 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
 
 static void __init p720t_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init p720t_init_late(void)
+{
 	platform_device_register(&p720t_nand_pdev);
 	platform_device_register_data(&platform_bus, "platform-lcd", 0,
 				      &p720t_lcd_power_pdata,
@@ -207,10 +213,6 @@ static void __init p720t_init(void)
 				      &p720t_lcd_backlight_pdata,
 				      sizeof(p720t_lcd_backlight_pdata));
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-}
-
-static void __init p720t_init_late(void)
-{
 	platform_device_register_data(&platform_bus, "leds-gpio", 0,
 				      &p720t_gpio_led_pdata,
 				      sizeof(p720t_gpio_led_pdata));
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
new file mode 100644
index 0000000..21161ed
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.c
@@ -0,0 +1,48 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+static const phys_addr_t clps711x_gpios[][2] __initconst = {
+	{ PADR, PADDR },
+	{ PBDR, PBDDR },
+	{ PCDR, PCDDR },
+	{ PDDR, PDDDR },
+	{ PEDR, PEDDR },
+};
+
+static void __init clps711x_add_gpio(void)
+{
+	unsigned i;
+	struct resource gpio_res[2];
+
+	memset(gpio_res, 0, sizeof(gpio_res));
+
+	gpio_res[0].flags = IORESOURCE_MEM;
+	gpio_res[1].flags = IORESOURCE_MEM;
+
+	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
+		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
+		gpio_res[0].end = gpio_res[0].start;
+		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
+		gpio_res[1].end = gpio_res[1].start;
+
+		platform_device_register_simple("clps711x-gpio", i,
+						gpio_res, ARRAY_SIZE(gpio_res));
+	}
+}
+
+void __init clps711x_devices_init(void)
+{
+	clps711x_add_gpio();
+}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
new file mode 100644
index 0000000..a5efc17
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.h
@@ -0,0 +1,12 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+void clps711x_devices_init(void);
-- 
1.8.1.5

[PATCH v2 3/3] GPIO: clps711x: Add DT support

[Alexander Shiyan]

Add DT support to the CLPS711X GPIO driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 .../devicetree/bindings/gpio/gpio-clps711x.txt     | 28 ++++++++++++++++++++++
 drivers/gpio/gpio-clps711x.c                       | 14 ++++++++---
 2 files changed, 39 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-clps711x.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
new file mode 100644
index 0000000..e0d0446
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
@@ -0,0 +1,28 @@
+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-gpio"
+- reg: Physical base GPIO controller registers location and length.
+  There should be two registers, first is DATA register, the second
+  is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = active high
+    1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	gpio0 = &porta;
+};
+
+porta: gpio at 80000000 {
+	compatible = "cirrus,clps711x-gpio";
+	reg = <0x80000000 0x1>, <0x80000040 0x1>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index 6ce8a8c..0edaf2c 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -17,10 +17,11 @@
 
 static int clps711x_gpio_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	void __iomem *dat, *dir;
 	struct bgpio_chip *bgc;
 	struct resource *res;
-	int err, id = pdev->id;
+	int err, id = np ? of_alias_get_id(np, "gpio") : pdev->id;
 
 	if ((id < 0) || (id > 4))
 		return -ENODEV;
@@ -76,10 +77,17 @@ static int clps711x_gpio_remove(struct platform_device *pdev)
 	return bgpio_remove(bgc);
 }
 
+static const struct of_device_id clps711x_gpio_ids[] = {
+	{ .compatible = "cirrus,clps711x-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_gpio_ids);
+
 static struct platform_driver clps711x_gpio_driver = {
 	.driver	= {
-		.name	= "clps711x-gpio",
-		.owner	= THIS_MODULE,
+		.name		= "clps711x-gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(clps711x_gpio_ids),
 	},
 	.probe	= clps711x_gpio_probe,
 	.remove	= clps711x_gpio_remove,
-- 
1.8.1.5

[PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Arnd Bergmann]

On Friday 26 April 2013, Alexander Shiyan wrote:
> This patch provides rewritten driver for CLPS711X GPIO which uses
> generic GPIO code.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

All three patches

Acked-by: Arnd Bergmann <arnd@arndb.de>

[PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Linus Walleij]

On Fri, Apr 26, 2013 at 5:47 PM, Alexander Shiyan <shc_work@mail.ru> wrote:

> This patch provides rewritten driver for CLPS711X GPIO which uses
> generic GPIO code.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

The series:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Olof Johansson]

On Sun, May 05, 2013 at 10:04:58PM +0200, Linus Walleij wrote:
> On Fri, Apr 26, 2013 at 5:47 PM, Alexander Shiyan <shc_work@mail.ru> wrote:
> 
> > This patch provides rewritten driver for CLPS711X GPIO which uses
> > generic GPIO code.
> >
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> 
> The series:
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Applied.


-Olof