* [PATCH 07/10] ARM: integrator: use explicit core module options
@ 2015-02-26 16:11 Arnd Bergmann
2015-02-26 16:11 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Arnd Bergmann @ 2015-02-26 16:11 UTC (permalink / raw)
To: linux-arm-kernel
For consistency with the other platforms, this remove the CPU
selection logic in mm/Kconfig that was only used by integrator,
and adds specific options for each available core tile and core
module, which in turn select the correct CPUs.
This is consistent with the new way that we do it for realview
and all other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-integrator/Kconfig | 132 ++++++++++++++++++++++++++++++++++-----
1 file changed, 115 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 02d083489a26..e936cf420b48 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_INTEGRATOR
+menuconfig ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT if MMU
@@ -23,8 +23,6 @@ config ARCH_INTEGRATOR
if ARCH_INTEGRATOR
-menu "Integrator Options"
-
config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms"
select CLKSRC_MMIO
@@ -36,19 +34,6 @@ config ARCH_INTEGRATOR_AP
Include support for the ARM(R) Integrator/AP and
Integrator/PP2 platforms.
-config ARCH_INTEGRATOR_CP
- bool "Support Integrator/CP platform"
- select ARCH_CINTEGRATOR
- select ARM_TIMER_SP804
- select SERIAL_AMBA_PL011 if TTY
- select SERIAL_AMBA_PL011_CONSOLE if TTY
- select SOC_BUS
- help
- Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
- bool
-
config INTEGRATOR_IMPD1
bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
@@ -63,6 +48,119 @@ config INTEGRATOR_IMPD1
To compile this driver as a module, choose M here: the
module will be called impd1.
-endmenu
+config INTEGRATOR_CM7TDMI
+ bool "Integrator/CM7TDMI core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V4 && !MMU
+ select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+ bool "Integrator/CM720T core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V4T
+ select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+ bool "Integrator/CM740T core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V4T && !MMU
+ select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+ bool "Integrator/CM920T core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V4T
+ select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+ bool "Integrator/CM922T-XA10 core module"
+ depends on ARCH_MULTI_V4T
+ depends on ARCH_INTEGRATOR_AP
+ select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+ bool "Integrator/CM926EJ-S core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V5
+ select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+ bool "Integrator/CM940T core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V4T && !MMU
+ select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+ bool "Integrator/CM946E-S core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V5 && !MMU
+ select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+ bool "Integrator/CM966E-S core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+ bool "Integrator/CM10200E rev.0 core module"
+ depends on ARCH_INTEGRATOR_AP && n
+ depends on ARCH_MULTI_V5
+ select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+ bool "Integrator/CM10200E core module"
+ depends on ARCH_INTEGRATOR_AP && n
+ depends on ARCH_MULTI_V5
+ select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+ bool "Integrator/CM10220E core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V5
+ select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+ bool "Integrator/CM1026EJ-S core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V5
+ select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+ bool "Integrator/CM1136JF-S core module"
+ depends on ARCH_INTEGRATOR_AP
+ depends on ARCH_MULTI_V6
+ select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+ bool "Support Integrator/CP platform"
+ depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+ select ARM_TIMER_SP804
+ select SERIAL_AMBA_PL011 if TTY
+ select SERIAL_AMBA_PL011_CONSOLE if TTY
+ select SOC_BUS
+ help
+ Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+ bool "Integrator/CT7TD (ARM7TDMI) core tile"
+ depends on ARCH_INTEGRATOR_CP
+ depends on ARCH_MULTI_V4T && !MMU
+ select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+ bool "Integrator/CT926 (ARM926EJ-S) core tile"
+ depends on ARCH_INTEGRATOR_CP
+ depends on ARCH_MULTI_V5
+ select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+ bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+ depends on ARCH_INTEGRATOR_CP
+ depends on ARCH_MULTI_V6
+ select CPU_V6
+
+config ARCH_CINTEGRATOR
+ depends on ARCH_INTEGRATOR_CP
+ def_bool y
endif
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 08/10] ARM: no longer make CPU targets visible separately
2015-02-26 16:11 [PATCH 07/10] ARM: integrator: use explicit core module options Arnd Bergmann
@ 2015-02-26 16:11 ` Arnd Bergmann
2015-02-27 12:55 ` Linus Walleij
2015-02-26 16:11 ` [PATCH 09/10] ARM: realview: make all header files local Arnd Bergmann
2015-02-27 12:53 ` [PATCH 07/10] ARM: integrator: use explicit core module options Linus Walleij
2 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2015-02-26 16:11 UTC (permalink / raw)
To: linux-arm-kernel
Now that realview and integrator always select the correct CPU
type themselves based on the core tiles, there is no need to
still have them user-visible in arch/arm/mm/Kconfig. The
ARM925T symbol has been selected by the only user for many
years, so that can be removed along with the realview and
integrator specific ones.
This also solves randconfig build problems on realview.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mm/Kconfig | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 932dde34661e..0fb3652b0f3f 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
# ARM720T
config CPU_ARM720T
- bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
# ARM740T
config CPU_ARM740T
- bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
# ARM920T
config CPU_ARM920T
- bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
# ARM922T
config CPU_ARM922T
- bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -108,7 +108,7 @@ config CPU_ARM922T
# ARM925T
config CPU_ARM925T
- bool "Support ARM925T processor" if ARCH_OMAP1
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
- bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
+ bool
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
# ARM940T
config CPU_ARM940T
- bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
# ARM946E-S
config CPU_ARM946E
- bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
# ARM1020 - needs validating
config CPU_ARM1020
- bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
# ARM1020E - needs validating
config CPU_ARM1020E
- bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
depends on n
select CPU_32v5
select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
# ARM1022E
config CPU_ARM1022
- bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
# ARM1026EJ-S
config CPU_ARM1026
- bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
# ARMv6k
config CPU_V6K
- bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 09/10] ARM: realview: make all header files local
2015-02-26 16:11 [PATCH 07/10] ARM: integrator: use explicit core module options Arnd Bergmann
2015-02-26 16:11 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
@ 2015-02-26 16:11 ` Arnd Bergmann
2015-02-27 12:53 ` [PATCH 07/10] ARM: integrator: use explicit core module options Linus Walleij
2 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2015-02-26 16:11 UTC (permalink / raw)
To: linux-arm-kernel
Nothing includes these files any more, so we can simply move them
from arch/arm/mach-realview/include/mach/ to arch/arm/mach-realview.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-realview/{include/mach => }/board-eb.h | 2 +-
arch/arm/mach-realview/{include/mach => }/board-pb1176.h | 2 +-
arch/arm/mach-realview/{include/mach => }/board-pb11mp.h | 2 +-
arch/arm/mach-realview/{include/mach => }/board-pba8.h | 2 +-
arch/arm/mach-realview/{include/mach => }/board-pbx.h | 2 +-
arch/arm/mach-realview/core.c | 6 +++---
arch/arm/mach-realview/{include/mach => }/hardware.h | 0
arch/arm/mach-realview/{include/mach => }/irqs-eb.h | 0
arch/arm/mach-realview/{include/mach => }/irqs-pb1176.h | 0
arch/arm/mach-realview/{include/mach => }/irqs-pb11mp.h | 0
arch/arm/mach-realview/{include/mach => }/irqs-pba8.h | 0
arch/arm/mach-realview/{include/mach => }/irqs-pbx.h | 0
arch/arm/mach-realview/{include/mach => }/irqs.h | 10 +++++-----
arch/arm/mach-realview/{include/mach => }/platform.h | 0
arch/arm/mach-realview/platsmp.c | 8 ++++----
arch/arm/mach-realview/realview_eb.c | 6 +++---
arch/arm/mach-realview/realview_pb1176.c | 6 +++---
arch/arm/mach-realview/realview_pb11mp.c | 6 +++---
arch/arm/mach-realview/realview_pba8.c | 6 +++---
arch/arm/mach-realview/realview_pbx.c | 6 +++---
arch/arm/mach-realview/{include/mach => }/uncompress.h | 12 ++++++------
21 files changed, 38 insertions(+), 38 deletions(-)
rename arch/arm/mach-realview/{include/mach => }/board-eb.h (99%)
rename arch/arm/mach-realview/{include/mach => }/board-pb1176.h (99%)
rename arch/arm/mach-realview/{include/mach => }/board-pb11mp.h (99%)
rename arch/arm/mach-realview/{include/mach => }/board-pba8.h (99%)
rename arch/arm/mach-realview/{include/mach => }/board-pbx.h (99%)
rename arch/arm/mach-realview/{include/mach => }/hardware.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs-eb.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs-pb1176.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs-pb11mp.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs-pba8.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs-pbx.h (100%)
rename arch/arm/mach-realview/{include/mach => }/irqs.h (88%)
rename arch/arm/mach-realview/{include/mach => }/platform.h (100%)
rename arch/arm/mach-realview/{include/mach => }/uncompress.h (91%)
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/board-eb.h
similarity index 99%
rename from arch/arm/mach-realview/include/mach/board-eb.h
rename to arch/arm/mach-realview/board-eb.h
index a301e61a5554..ac9c98f9a971 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/board-eb.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_BOARD_EB_H
#define __ASM_ARCH_BOARD_EB_H
-#include <mach/platform.h>
+#include "platform.h"
/*
* RealView EB + ARM11MPCore peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
similarity index 99%
rename from arch/arm/mach-realview/include/mach/board-pb1176.h
rename to arch/arm/mach-realview/board-pb1176.h
index 2a15fef94730..836433dc789c 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/board-pb1176.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_BOARD_PB1176_H
#define __ASM_ARCH_BOARD_PB1176_H
-#include <mach/platform.h>
+#include "platform.h"
/*
* Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
similarity index 99%
rename from arch/arm/mach-realview/include/mach/board-pb11mp.h
rename to arch/arm/mach-realview/board-pb11mp.h
index aa2d4e02ea2c..e3a758b147ab 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/board-pb11mp.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_BOARD_PB11MP_H
#define __ASM_ARCH_BOARD_PB11MP_H
-#include <mach/platform.h>
+#include "platform.h"
/*
* Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
similarity index 99%
rename from arch/arm/mach-realview/include/mach/board-pba8.h
rename to arch/arm/mach-realview/board-pba8.h
index 4dfc67a4f45f..84232fe942d2 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/board-pba8.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_BOARD_PBA8_H
#define __ASM_ARCH_BOARD_PBA8_H
-#include <mach/platform.h>
+#include "platform.h"
/*
* Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
similarity index 99%
rename from arch/arm/mach-realview/include/mach/board-pbx.h
rename to arch/arm/mach-realview/board-pbx.h
index 848bfff6d8f1..3dab54fa9e97 100644
--- a/arch/arm/mach-realview/include/mach/board-pbx.h
+++ b/arch/arm/mach-realview/board-pbx.h
@@ -20,7 +20,7 @@
#ifndef __ASM_ARCH_BOARD_PBX_H
#define __ASM_ARCH_BOARD_PBX_H
-#include <mach/platform.h>
+#include "platform.h"
/*
* Peripheral addresses
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 850e506926df..2e4d57cf65b9 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -34,7 +34,7 @@
#include <linux/mtd/physmap.h>
#include <linux/memblock.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
@@ -45,8 +45,8 @@
#include <asm/mach/map.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
+#include "platform.h"
+#include "irqs.h"
#include <asm/hardware/timer-sp.h>
#include <plat/sched_clock.h>
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/hardware.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/hardware.h
rename to arch/arm/mach-realview/hardware.h
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/irqs-eb.h
rename to arch/arm/mach-realview/irqs-eb.h
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/irqs-pb1176.h
rename to arch/arm/mach-realview/irqs-pb1176.h
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/irqs-pb11mp.h
rename to arch/arm/mach-realview/irqs-pb11mp.h
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/irqs-pba8.h
rename to arch/arm/mach-realview/irqs-pba8.h
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/irqs-pbx.h
rename to arch/arm/mach-realview/irqs-pbx.h
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/irqs.h
similarity index 88%
rename from arch/arm/mach-realview/include/mach/irqs.h
rename to arch/arm/mach-realview/irqs.h
index 78854f2fa323..1bd8a9a00337 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/irqs.h
@@ -22,11 +22,11 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/irqs-eb.h>
-#include <mach/irqs-pb11mp.h>
-#include <mach/irqs-pb1176.h>
-#include <mach/irqs-pba8.h>
-#include <mach/irqs-pbx.h>
+#include "irqs-eb.h"
+#include "irqs-pb11mp.h"
+#include "irqs-pb1176.h"
+#include "irqs-pba8.h"
+#include "irqs-pbx.h"
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/platform.h
similarity index 100%
rename from arch/arm/mach-realview/include/mach/platform.h
rename to arch/arm/mach-realview/platform.h
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 98e3052b7933..a2331b36ccce 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -13,13 +13,13 @@
#include <linux/smp.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pbx.h>
+#include "board-eb.h"
+#include "board-pb11mp.h"
+#include "board-pbx.h"
#include <plat/platsmp.h>
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index cebfdce1c7cd..c27eab1c39f7 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,7 +31,7 @@
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
@@ -43,8 +43,8 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/board-eb.h>
-#include <mach/irqs.h>
+#include "board-eb.h"
+#include "irqs.h"
#include "core.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ce92c1823494..e5fd1ce9051f 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -34,7 +34,7 @@
#include <linux/reboot.h>
#include <linux/memblock.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
@@ -45,8 +45,8 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/board-pb1176.h>
-#include <mach/irqs.h>
+#include "board-pb1176.h"
+#include "irqs.h"
#include "core.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f9817bb5d8fa..10b16961f7e1 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,7 @@
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
@@ -43,8 +43,8 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/board-pb11mp.h>
-#include <mach/irqs.h>
+#include "board-pb11mp.h"
+#include "irqs.h"
#include "core.h"
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index b3549a637ff0..263e37391445 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -39,9 +39,9 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/board-pba8.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pba8.h"
+#include "irqs.h"
#include "core.h"
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index f26e1e09f29e..810b15410bf2 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/board-pbx.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pbx.h"
+#include "irqs.h"
#include "core.h"
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/uncompress.h
similarity index 91%
rename from arch/arm/mach-realview/include/mach/uncompress.h
rename to arch/arm/mach-realview/uncompress.h
index cfa30d21783b..f8ac3e723628 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/uncompress.h
@@ -17,14 +17,14 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <mach/hardware.h>
+#include "hardware.h"
#include <asm/mach-types.h>
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
+#include "board-eb.h"
+#include "board-pb11mp.h"
+#include "board-pb1176.h"
+#include "board-pba8.h"
+#include "board-pbx.h"
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 07/10] ARM: integrator: use explicit core module options
2015-02-26 16:11 [PATCH 07/10] ARM: integrator: use explicit core module options Arnd Bergmann
2015-02-26 16:11 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
2015-02-26 16:11 ` [PATCH 09/10] ARM: realview: make all header files local Arnd Bergmann
@ 2015-02-27 12:53 ` Linus Walleij
2 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2015-02-27 12:53 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 26, 2015 at 5:11 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> For consistency with the other platforms, this remove the CPU
> selection logic in mm/Kconfig that was only used by integrator,
> and adds specific options for each available core tile and core
> module, which in turn select the correct CPUs.
>
> This is consistent with the new way that we do it for realview
> and all other platforms.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Applied, compiled, and booted on Integrator/AP with an ARM926 core
tile.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 08/10] ARM: no longer make CPU targets visible separately
2015-02-26 16:11 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
@ 2015-02-27 12:55 ` Linus Walleij
0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2015-02-27 12:55 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 26, 2015 at 5:11 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> Now that realview and integrator always select the correct CPU
> type themselves based on the core tiles, there is no need to
> still have them user-visible in arch/arm/mm/Kconfig. The
> ARM925T symbol has been selected by the only user for many
> years, so that can be removed along with the realview and
> integrator specific ones.
>
> This also solves randconfig build problems on realview.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 08/10] ARM: no longer make CPU targets visible separately
2015-11-25 16:32 [PATCH 00/10] ARM: realview multiplatform Arnd Bergmann
@ 2015-11-25 16:32 ` Arnd Bergmann
0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:32 UTC (permalink / raw)
To: linux-arm-kernel
Now that realview and integrator always select the correct CPU
type themselves based on the core tiles, there is no need to
still have them user-visible in arch/arm/mm/Kconfig. The
ARM925T symbol has been selected by the only user for many
years, so that can be removed along with the realview and
integrator specific ones.
This also solves randconfig build problems on realview.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
---
arch/arm/mm/Kconfig | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 76f65f2d59b1..549f6d3aec5b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
# ARM720T
config CPU_ARM720T
- bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
# ARM740T
config CPU_ARM740T
- bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
# ARM920T
config CPU_ARM920T
- bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
# ARM922T
config CPU_ARM922T
- bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -108,7 +108,7 @@ config CPU_ARM922T
# ARM925T
config CPU_ARM925T
- bool "Support ARM925T processor" if ARCH_OMAP1
+ bool
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
- bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
+ bool
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
# ARM940T
config CPU_ARM940T
- bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
# ARM946E-S
config CPU_ARM946E
- bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
# ARM1020 - needs validating
config CPU_ARM1020
- bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
# ARM1020E - needs validating
config CPU_ARM1020E
- bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
depends on n
select CPU_32v5
select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
# ARM1022E
config CPU_ARM1022
- bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
# ARM1026EJ-S
config CPU_ARM1026
- bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+ bool
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
# ARMv6k
config CPU_V6K
- bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+ bool
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-11-25 16:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-26 16:11 [PATCH 07/10] ARM: integrator: use explicit core module options Arnd Bergmann
2015-02-26 16:11 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
2015-02-27 12:55 ` Linus Walleij
2015-02-26 16:11 ` [PATCH 09/10] ARM: realview: make all header files local Arnd Bergmann
2015-02-27 12:53 ` [PATCH 07/10] ARM: integrator: use explicit core module options Linus Walleij
-- strict thread matches above, loose matches on Subject: below --
2015-11-25 16:32 [PATCH 00/10] ARM: realview multiplatform Arnd Bergmann
2015-11-25 16:32 ` [PATCH 08/10] ARM: no longer make CPU targets visible separately Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).