[PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine

[zonque@gmail.com (Daniel Mack)]

On Tue, Jul 12, 2011 at 12:28 PM, Lei Wen <leiwen@marvell.com> wrote:
> This patch add protection on the suspend&resume path to prevent
> some unexpected behavior, like interrupt occur at the very second
> of resume back and it don't follow normal command path, which lead
> to bug.
>
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> ---
> ?drivers/mtd/nand/pxa3xx_nand.c | ? 28 ++++++++++++++++++++++++++++
> ?1 files changed, 28 insertions(+), 0 deletions(-)
>

[...]

> @@ -1267,6 +1283,18 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
> ? ? ? ?info->cs = 0xff;
> ? ? ? ?clk_enable(info->clk);
>
> + ? ? ? /*
> + ? ? ? ?* As the spec, the NDSR would be updated to 0x1800 when
> + ? ? ? ?* do the nand_clk disable/enable.
> + ? ? ? ?* To prevent it damage state machine of the driver, clear
> + ? ? ? ?* all status before resume
> + ? ? ? ?*/
> + ? ? ? nand_writel(nand, NDSR, NDSR_MASK);

This doesn't build:

  CC      drivers/mtd/nand/pxa3xx_nand.o
drivers/mtd/nand/pxa3xx_nand.c: In function 'pxa3xx_nand_resume':
drivers/mtd/nand/pxa3xx_nand.c:1292: error: 'nand' undeclared (first
use in this function)
drivers/mtd/nand/pxa3xx_nand.c:1292: error: (Each undeclared
identifier is reported only once
drivers/mtd/nand/pxa3xx_nand.c:1292: error: for each function it appears in.)
drivers/mtd/nand/pxa3xx_nand.c:1294: error: 'mtd' undeclared (first
use in this function)
make[3]: *** [drivers/mtd/nand/pxa3xx_nand.o] Error 1

I guess this was not even compile tested? Anyway, I did a trivial
fix-up and will test.


Daniel