From: lftan@altera.com (Ley Foon Tan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] pci:host: Add Altera PCIe host controller driver
Date: Wed, 29 Jul 2015 11:05:07 +0800 [thread overview]
Message-ID: <CAFiDJ5-c8h7ry4NWMCADbDgxaeEyOOHHWDSwJfRJuo-Vw7mOdw@mail.gmail.com> (raw)
In-Reply-To: <CADhT+weU=VB=fQxXsXeF-0WjQj5rofeCDhV1LfbFWOm-7Oem0w@mail.gmail.com>
On Wed, Jul 29, 2015 at 12:45 AM, Dinh Nguyen <dinh.linux@gmail.com> wrote:
> On Tue, Jul 28, 2015 at 5:45 AM, Ley Foon Tan <lftan@altera.com> wrote:
>> This patch adds the Altera PCIe host controller driver.
>>
>> Signed-off-by: Ley Foon Tan <lftan@altera.com>
>> ---
>> drivers/pci/host/Kconfig | 9 +
>> drivers/pci/host/Makefile | 1 +
>> drivers/pci/host/pcie-altera.c | 576 +++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 586 insertions(+)
>> create mode 100644 drivers/pci/host/pcie-altera.c
>>
>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
>> index 675c2d1..af19039 100644
>> --- a/drivers/pci/host/Kconfig
>> +++ b/drivers/pci/host/Kconfig
>> @@ -145,4 +145,13 @@ config PCIE_IPROC_BCMA
>> Say Y here if you want to use the Broadcom iProc PCIe controller
>> through the BCMA bus interface
>>
>> +config PCIE_ALTERA
>> + bool "Altera PCIe controller"
>> + depends on ARCH_SOCFPGA
>> + depends on OF
>
> I don't think you need this, "depends on ARCH_SOCFPGA" should already
> have taken care of this.
Okay, will remove this.
>
>> + select PCI_MSI_IRQ_DOMAIN if PCI_MSI
>> + help
>> + Say Y here if you want to enable PCIe controller support for Altera
>> + SoCFPGA family of SoCs.
>> +
>> endmenu
>
> <snip>
>
>> +
>> +static int tlp_read_packet(struct altera_pcie *pcie, u32 *value)
>> +{
>> + u8 loop;
>> + struct tlp_rp_regpair_t tlp_rp_regdata;
>> +
>> + for (loop = TLP_LOOP; loop > 0; loop--) {
>> +
>> + tlp_read_rx(pcie, &tlp_rp_regdata);
>> +
>> + if (tlp_rp_regdata.ctrl & RP_RXCPL_EOP) {
>> +
>> + if (value)
>> + *value = tlp_rp_regdata.reg0;
>> +
>> + return PCIBIOS_SUCCESSFUL;
>> + }
>
> Remove all the unnecessary newlines in this function.
Noted.
>> + }
>> +
>> + return -ENOENT;
>> +}
>> +
>
> <snip>
>
>> +
>> +static struct platform_driver altera_pcie_driver = {
>> + .probe = altera_pcie_probe,
>> + .remove = altera_pcie_remove,
>> + .driver = {
>> + .name = "altera-pcie",
>> + .owner = THIS_MODULE,
>
> Don't need to set owner anymore as this will get populated by the driver core.
Will remove it.
Thanks for reviewing.
Regards
Ley Foon
next prev parent reply other threads:[~2015-07-29 3:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-28 10:45 [PATCH 0/6] Altera PCIe host controller driver with MSI support Ley Foon Tan
2015-07-28 10:45 ` [PATCH 1/6] arm: add msi.h to Kbuild Ley Foon Tan
2015-07-28 10:45 ` [PATCH 2/6] arm: mach-socfpga: enable pci support Ley Foon Tan
2015-07-28 13:26 ` Rob Herring
2015-07-29 3:03 ` Ley Foon Tan
2015-07-28 10:45 ` [PATCH 3/6] pci:host: Add Altera PCIe host controller driver Ley Foon Tan
2015-07-28 16:45 ` Dinh Nguyen
2015-07-29 3:05 ` Ley Foon Tan [this message]
2015-07-29 3:43 ` Rob Herring
2015-07-29 11:08 ` Ley Foon Tan
2015-07-29 8:35 ` Paul Bolle
2015-07-29 17:43 ` Ley Foon Tan
2015-07-29 13:19 ` Lorenzo Pieralisi
2015-07-29 17:51 ` Ley Foon Tan
2015-07-28 10:45 ` [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver Ley Foon Tan
2015-07-28 17:00 ` Dinh Nguyen
2015-07-29 3:07 ` Ley Foon Tan
2015-07-29 3:38 ` Dinh Nguyen
2015-07-29 8:53 ` Ley Foon Tan
2015-07-28 17:58 ` Marc Zyngier
2015-07-29 8:52 ` Ley Foon Tan
2015-07-29 9:15 ` Marc Zyngier
2015-07-31 3:19 ` Ley Foon Tan
2015-07-28 10:45 ` [PATCH 5/6] Documentation: dt-bindings: pci: altera pcie device tree binding Ley Foon Tan
2015-07-28 10:45 ` [PATCH 6/6] MAINTAINERS: Add Altera PCIe driver maintainer Ley Foon Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAFiDJ5-c8h7ry4NWMCADbDgxaeEyOOHHWDSwJfRJuo-Vw7mOdw@mail.gmail.com \
--to=lftan@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).