From: djkurtz@chromium.org (Daniel Kurtz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks
Date: Wed, 1 Jul 2015 22:21:55 +0800 [thread overview]
Message-ID: <CAGS+omDqSEn_WnUYz0XmeRpejhthb0J_qa4H9VEfihtA0Axorg@mail.gmail.com> (raw)
In-Reply-To: <1435633127-31952-2-git-send-email-jamesjj.liao@mediatek.com>
Hi James,
To be precise, it is the CLK_TOP clocks that have CLK_APMIXED PLLs as
their parents, so we cannot enable the CLK_TOP critical clocks until
the CLK_APMIXED clocks have all been registered.
Please add something like the above to the commit message.
More comments inline...
On Tue, Jun 30, 2015 at 10:58 AM, James Liao <jamesjj.liao@mediatek.com> wrote:
> From: Sascha Hauer <s.hauer@pengutronix.de>
>
> On the MT8173 the clocks are provided by different units. To enable
> the critical clocks we must be sure that all parent clocks are already
> registered, otherwise the parents of the critical clocks end up being
> unused and get disabled later. To find a place where all parents are
> registered we try each time after we've registered some clocks if
> all known providers are present now and only then we enable the critical
> clocks
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> ---
> drivers/clk/mediatek/clk-mt8173.c | 26 +++++++++++++++++++++-----
> 1 file changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
> index 4b9e04c..c483336 100644
> --- a/drivers/clk/mediatek/clk-mt8173.c
> +++ b/drivers/clk/mediatek/clk-mt8173.c
> @@ -700,6 +700,22 @@ static const struct mtk_composite peri_clks[] __initconst = {
> MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1),
> };
>
> +static struct clk_onecell_data *mt8173_top_clk_data;
> +static struct clk_onecell_data *mt8173_pll_clk_data;
These globals can be:
__initdata
> +
> +static void mtk_clk_enable_critical(void)
And this function is:
static void __init
Other than the above, this one is:
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
-Dan
> +{
> + if (!mt8173_top_clk_data || !mt8173_pll_clk_data)
> + return;
> +
> + clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
> + clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA7PLL]);
> + clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_MEM_SEL]);
> + clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
> + clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_CCI400_SEL]);
> + clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_RTC_SEL]);
> +}
> +
> static void __init mtk_topckgen_init(struct device_node *node)
> {
> struct clk_onecell_data *clk_data;
> @@ -712,19 +728,19 @@ static void __init mtk_topckgen_init(struct device_node *node)
> return;
> }
>
> - clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
> + mt8173_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
>
> mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
> mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
> mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
> &mt8173_clk_lock, clk_data);
>
> - clk_prepare_enable(clk_data->clks[CLK_TOP_CCI400_SEL]);
> -
> r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> if (r)
> pr_err("%s(): could not register clock provider: %d\n",
> __func__, r);
> +
> + mtk_clk_enable_critical();
> }
> CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
>
> @@ -818,13 +834,13 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
> {
> struct clk_onecell_data *clk_data;
>
> - clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
> + mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
> if (!clk_data)
> return;
>
> mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
>
> - clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
> + mtk_clk_enable_critical();
> }
> CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
> mtk_apmixedsys_init);
> --
> 1.8.1.1.dirty
>
next prev parent reply other threads:[~2015-07-01 14:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 2:58 [PATCH v2 0/4] Add Mediatek MT8173 subsystem clocks support James Liao
2015-06-30 2:58 ` [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks James Liao
2015-07-01 14:21 ` Daniel Kurtz [this message]
2015-07-02 2:07 ` Daniel Kurtz
2015-07-02 2:18 ` James Liao
2015-07-02 23:03 ` Stephen Boyd
2015-07-03 6:29 ` Daniel Kurtz
2015-07-06 22:52 ` Stephen Boyd
2015-06-30 2:58 ` [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers James Liao
2015-07-01 13:47 ` Daniel Kurtz
2015-07-02 2:52 ` James Liao
2015-07-02 4:26 ` Daniel Kurtz
2015-07-02 23:40 ` Stephen Boyd
2015-07-03 10:46 ` Daniel Kurtz
2015-07-07 6:56 ` James Liao
2015-07-01 16:03 ` Rob Herring
2015-06-30 2:58 ` [PATCH v2 3/4] clk: mediatek: Add subsystem clocks of MT8173 James Liao
2015-07-01 14:54 ` Daniel Kurtz
2015-07-03 5:15 ` James Liao
2015-07-03 6:08 ` Daniel Kurtz
2015-06-30 2:58 ` [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS James Liao
[not found] ` <CAGS+omBRAJVN3uPYn9YdKZ3VBj61c-rpY_cNgnK6x9U0uJBPYw@mail.gmail.com>
2015-07-01 15:22 ` Daniel Kurtz
2015-07-03 5:38 ` James Liao
2015-07-03 6:28 ` Daniel Kurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGS+omDqSEn_WnUYz0XmeRpejhthb0J_qa4H9VEfihtA0Axorg@mail.gmail.com \
--to=djkurtz@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).