From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support
Date: Thu, 20 Feb 2014 16:41:32 -0800 [thread overview]
Message-ID: <CAGVrzcZTHZYaB7sEDxFrP3PzZh0y-daS0gqg2Z4PUzuWGFeiSw@mail.gmail.com> (raw)
In-Reply-To: <1391463041-15241-1-git-send-email-marc.ceeeee@gmail.com>
Matt,
2014-02-03 13:30 GMT-08:00 Marc Carino <marc.ceeeee@gmail.com>:
> This patchset contains the board support package for the
> Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
> minimal set of code needed for a BCM7445-based board to boot
> the Linux kernel.
If you are happy with this round of changes, can you also carry those
patches in your tree for 3.15?
>
> These changes heavily leverage the OF/devicetree framework.
>
> v6:
> - rebased to v3.14-rc1
> - utilize common APIs for handling CPU power-down
> - drop deprecated __cpuinit attributes
>
> v5 (https://lkml.org/lkml/2014/1/21/640):
> - rebased to v3.13 tag
> - make UART DT node a child of 'rdb' node
> - fix ordering of debug UART entries
>
> v4 (https://lkml.org/lkml/2014/1/17/455):
> - make a reboot driver and put it in the drivers folder
> - rework DT bindings to leverage 'syscon'
> - rework BSP code to use 'syscon' for all register mappings
> - misc. tweaks per suggestions from v3
>
> v3 (https://lkml.org/lkml/2014/1/14/696):
> - rebased to v3.13-rc8
> - switched to using 'multi_v7_defconfig'
> - eliminated dependence on compile-time peripheral register access
> - moved DT node iomap out from 'init_early'
> - misc. minor cleanups from mailing-list discussion for v2
>
> v2 (https://lkml.org/lkml/2013/11/26/570):
> - rebased to v3.13-rc1
> - moved implementation to 'mach-bcm' folder
> - added CPU init for B16RM
>
> v1:
> - initial submission
>
> [1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
>
> Marc Carino (8):
> ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
> power: reset: Add reboot driver for brcmstb
> ARM: brcmstb: add debug UART for earlyprintk support
> ARM: do CPU-specific init for Broadcom Brahma15 cores
> ARM: brcmstb: add CPU binding for Broadcom Brahma15
> ARM: brcmstb: add misc. DT bindings for brcmstb
> ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
> ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
>
> .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> Documentation/devicetree/bindings/arm/gic.txt | 1 +
> arch/arm/Kconfig.debug | 15 +-
> arch/arm/boot/dts/bcm7445.dts | 111 +++++++
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/mach-bcm/Kconfig | 15 +
> arch/arm/mach-bcm/Makefile | 4 +
> arch/arm/mach-bcm/brcmstb.c | 104 +++++++
> arch/arm/mach-bcm/brcmstb.h | 38 +++
> arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++
> arch/arm/mach-bcm/hotplug-brcmstb.c | 311 ++++++++++++++++++++
> arch/arm/mm/proc-v7.S | 11 +
> drivers/power/reset/Kconfig | 10 +
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/brcmstb-reboot.c | 120 ++++++++
> 16 files changed, 870 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
> create mode 100644 arch/arm/boot/dts/bcm7445.dts
> create mode 100644 arch/arm/mach-bcm/brcmstb.c
> create mode 100644 arch/arm/mach-bcm/brcmstb.h
> create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
> create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
> create mode 100644 drivers/power/reset/brcmstb-reboot.c
>
--
Florian
next prev parent reply other threads:[~2014-02-21 0:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-03 21:30 [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support Marc Carino
2014-02-03 21:30 ` [PATCH v6 1/8] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs Marc Carino
2014-02-03 21:30 ` [PATCH v6 2/8] power: reset: Add reboot driver for brcmstb Marc Carino
2014-02-03 21:30 ` [PATCH v6 3/8] ARM: brcmstb: add debug UART for earlyprintk support Marc Carino
2014-02-03 21:30 ` [PATCH v6 4/8] ARM: do CPU-specific init for Broadcom Brahma15 cores Marc Carino
2014-02-03 21:30 ` [PATCH v6 5/8] ARM: brcmstb: add CPU binding for Broadcom Brahma15 Marc Carino
2014-02-03 21:30 ` [PATCH v6 6/8] ARM: brcmstb: add misc. DT bindings for brcmstb Marc Carino
2014-02-03 21:30 ` [PATCH v6 7/8] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 Marc Carino
2014-02-03 21:30 ` [PATCH v6 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 Marc Carino
2014-02-21 16:39 ` Matt Porter
2014-02-21 0:41 ` Florian Fainelli [this message]
2014-02-21 16:54 ` [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGVrzcZTHZYaB7sEDxFrP3PzZh0y-daS0gqg2Z4PUzuWGFeiSw@mail.gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).