From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 2 Feb 2016 14:35:36 +0800 Subject: [PATCH 09/14] ARM: dts: sun8i-a83t: Add mmc controller nodes In-Reply-To: <1454203266-4450-10-git-send-email-vishnupatekar0510@gmail.com> References: <1454203266-4450-1-git-send-email-vishnupatekar0510@gmail.com> <1454203266-4450-10-git-send-email-vishnupatekar0510@gmail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar wrote: > A83T mmc is compatible with earliers sunxi socs. > This adds mmc0, mmc1, and mmc2 controller nodes for A83T. > > Signed-off-by: Vishnu Patekar > --- > arch/arm/boot/dts/sun8i-a83t.dtsi | 57 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > index b8c8b60..ac96aa1 100644 > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > @@ -276,6 +276,63 @@ > #size-cells = <1>; > ranges; > > + mmc0: mmc at 01c0f000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c0f000 0x1000>; > + clocks = <&bus_gates 8>, > + <&mmc0_clk 0>, > + <&mmc0_clk 1>, > + <&mmc0_clk 2>; > + clock-names = "ahb", > + "mmc", > + "output", > + "sample"; > + resets = <&ahb_reset0 8>; > + reset-names = "ahb"; > + interrupts = ; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + mmc1: mmc at 01c10000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c10000 0x1000>; > + clocks = <&bus_gates 9>, > + <&mmc1_clk 0>, > + <&mmc1_clk 1>, > + <&mmc1_clk 2>; > + clock-names = "ahb", > + "mmc", > + "output", > + "sample"; > + resets = <&ahb_reset0 9>; > + reset-names = "ahb"; > + interrupts = ; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + mmc2: mmc at 01c11000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c11000 0x1000>; > + clocks = <&bus_gates 10>, > + <&mmc2_clk 0>, > + <&mmc2_clk 1>, > + <&mmc2_clk 2>; > + clock-names = "ahb", > + "mmc", > + "output", > + "sample"; > + resets = <&ahb_reset0 10>; > + reset-names = "ahb"; > + interrupts = ; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + This patch looks good, except for the reset control I pointed out in the other patch. Regards ChenYu > pio: pinctrl at 01c20800 { > compatible = "allwinner,sun8i-a83t-pinctrl"; > interrupts = , > -- > 1.9.1 >