From mboxrd@z Thu Jan 1 00:00:00 1970 From: aford173@gmail.com (Adam Ford) Date: Wed, 21 Mar 2018 13:41:41 -0500 Subject: WL1837-st on imx6 request_firmware failed with 4.16-RC6 In-Reply-To: <20180321162749.ammvnmamwknwjonr@tarshish> References: <20180321162749.ammvnmamwknwjonr@tarshish> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Mar 21, 2018 at 11:27 AM, Baruch Siach wrote: > Hi Adam, > > On Wed, Mar 21, 2018 at 10:31:55AM -0500, Adam Ford wrote: >> I have an i.MX6 board and I am trying to get Bluetooth operational on >> 4.16-RC6 using the default imx_v6_v7_defconfig >> >> I have my device tree configured as follows: >> >> &uart2 { >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_uart2>; >> uart-has-rtscts; >> status = "okay"; >> [snip] > > Is your filesystem mounted at this point? Do you use initramfs? > > baruch That was it. Thanks. I feel stupid. :-) > >> I was hoping someone might have some insight on what might be the issue. >> >> Thanks >> >> adam >> [snip] > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open Systems > =}------------------------------------------------ooO--U--Ooo------------{= > - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -