From: Amit Kucheria <amit.kucheria@verdurent.com>
To: Keerthy <j-keerthy@ti.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
LKML <linux-kernel@vger.kernel.org>,
t-kristo@ti.com, Rob Herring <robh+dt@kernel.org>,
Zhang Rui <rui.zhang@intel.com>,
lakml <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v6 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation
Date: Wed, 8 Apr 2020 13:00:00 +0530 [thread overview]
Message-ID: <CAHLCerOYfG4eifkWdecJ49cSx05pgDwc30L3zZuu0d9dVQN-AQ@mail.gmail.com> (raw)
In-Reply-To: <20200407055116.16082-2-j-keerthy@ti.com>
On Tue, Apr 7, 2020 at 11:21 AM Keerthy <j-keerthy@ti.com> wrote:
>
> Add VTM bindings documentation. In the Voltage Thermal
> Management Module(VTM), K3 AM654 supplies a voltage
> reference and a temperature sensor feature that are gathered in the band
> gap voltage and temperature sensor (VBGAPTS) module. The band
> gap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>
> Changes in v6:
>
> * Reordered the properties to match the order of definition.
>
> .../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> new file mode 100644
> index 000000000000..25b9209c2e5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments AM654 VTM (DTS) binding
> +
> +maintainers:
> + - Keerthy <j-keerthy@ti.com>
> +
> +properties:
> + compatible:
> + const: ti,am654-vtm
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + "#thermal-sensor-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/ti,sci_pm_domain.h>
> + vtm: thermal@42050000 {
> + compatible = "ti,am654-vtm";
> + reg = <0x0 0x42050000 0x0 0x25c>;
> + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + mpu0_thermal: mpu0_thermal {
> + polling-delay-passive = <250>; /* milliseconds */
> + polling-delay = <500>; /* milliseconds */
> + thermal-sensors = <&vtm0 0>;
> +
> + trips {
> + mpu0_crit: mpu0_crit {
> + temperature = <125000>; /* milliCelsius */
> + hysteresis = <2000>; /* milliCelsius */
> + type = "critical";
> + };
> + };
> + };
> +...
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-08 7:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-07 5:51 [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors Keerthy
2020-04-07 5:51 ` [PATCH v6 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation Keerthy
2020-04-08 7:30 ` Amit Kucheria [this message]
2020-04-07 5:51 ` [PATCH v6 2/4] thermal: k3: Add support for bandgap sensors Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-07 5:51 ` [PATCH v6 3/4] arm64: dts: ti: am65-wakeup: Add VTM node Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-07 5:51 ` [PATCH v6 4/4] arm64: dts: ti: am654: Add thermal zones Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-09 13:49 ` [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors Daniel Lezcano
2020-04-09 14:07 ` J, KEERTHY
2020-04-09 14:37 ` Tero Kristo
2020-04-09 14:47 ` Daniel Lezcano
2020-04-27 10:21 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHLCerOYfG4eifkWdecJ49cSx05pgDwc30L3zZuu0d9dVQN-AQ@mail.gmail.com \
--to=amit.kucheria@verdurent.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).