linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pinctrl: samsung: add pin_dbg_show callback for debugfs
Date: Tue, 27 Mar 2018 09:07:04 +0200	[thread overview]
Message-ID: <CAJKOXPcpb-xFUBCQMXqoTpydwcL2cw+9Omi+3uYxK9fvzxWFhQ@mail.gmail.com> (raw)
In-Reply-To: <20180326152711.7780-1-parkch98@gmail.com>

On Mon, Mar 26, 2018 at 5:27 PM, Chanho Park <parkch98@gmail.com> wrote:
> This patch adds a samsung_pin_dbg_show function to implement the
> pin_dbg_show callback function which can be used to show pin
> confuration values. Basically, it can show pin setting values by
> accessing the "pins" node like below:
>
> $ cat pins
> pin 0 (gpy7-0)  CON(0x0) DAT(0x1) PUD(0x1) DRV(0x0) CON_PDN(0x0) PUD_PDN(0x0)
>
> Signed-off-by: Chanho Park <parkch98@gmail.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-samsung.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index 336e88d7bdb9..bdec0cbd64f1 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -279,6 +279,30 @@ static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
>         return 0;
>  }
>
> +#ifdef CONFIG_DEBUG_FS
> +/* Forward declaration which can be used by samsung_pin_dbg_show */
> +static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
> +                               unsigned long *config, bool set);
> +static char *reg_names[] = {"CON", "DAT", "PUD", "DRV", "CON_PDN", "PUD_PDN"};

This should be static const char. Please also add an empty line here.

> +static void samsung_pin_dbg_show(struct pinctrl_dev *pctldev,
> +                               struct seq_file *s, unsigned int pin)
> +{
> +       enum pincfg_type cfg_type;
> +       unsigned long config;
> +       int ret;
> +
> +       for (cfg_type = 0; cfg_type < PINCFG_TYPE_NUM; cfg_type++) {
> +               config = PINCFG_PACK(cfg_type, 0);
> +               ret = samsung_pinconf_rw(pctldev, pin, &config, false);

Use samsung_pinconf_get().

> +               if (ret == -EINVAL)

if (ret < 0)

Best regards,
Krzysztof

> +                       continue;
> +
> +               seq_printf(s, " %s(0x%lx)", reg_names[cfg_type],
> +                          PINCFG_UNPACK_VALUE(config));
> +       }
> +}
> +#endif
> +
>  /* list of pinctrl callbacks for the pinctrl core */
>  static const struct pinctrl_ops samsung_pctrl_ops = {
>         .get_groups_count       = samsung_get_group_count,
> @@ -286,6 +310,9 @@ static const struct pinctrl_ops samsung_pctrl_ops = {
>         .get_group_pins         = samsung_get_group_pins,
>         .dt_node_to_map         = samsung_dt_node_to_map,
>         .dt_free_map            = samsung_dt_free_map,
> +#ifdef CONFIG_DEBUG_FS
> +       .pin_dbg_show           = samsung_pin_dbg_show,
> +#endif
>  };
>
>  /* check if the selector is a valid pin function selector */
> --
> 2.14.1
>

  reply	other threads:[~2018-03-27  7:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-26 15:27 [PATCH] pinctrl: samsung: add pin_dbg_show callback for debugfs Chanho Park
2018-03-27  7:07 ` Krzysztof Kozlowski [this message]
2018-03-27 13:47   ` Chanho Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJKOXPcpb-xFUBCQMXqoTpydwcL2cw+9Omi+3uYxK9fvzxWFhQ@mail.gmail.com \
    --to=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).