[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Martin Kaiser]

The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
function blocks. Add their ipg and per clocks to the device tree.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---

I tried to make this similar to gpt1 and gpt2.

 arch/arm/boot/dts/imx25.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index b25309d26ea5..e80101847aff 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -388,12 +388,16 @@
 			epit1: timer at 53f94000 {
 				compatible = "fsl,imx25-epit";
 				reg = <0x53f94000 0x4000>;
+				clocks = <&clks 83>, <&clks 43>;
+				clock-names = "ipg", "per";
 				interrupts = <28>;
 			};
 
 			epit2: timer at 53f98000 {
 				compatible = "fsl,imx25-epit";
 				reg = <0x53f98000 0x4000>;
+				clocks = <&clks 84>, <&clks 43>;
+				clock-names = "ipg", "per";
 				interrupts = <27>;
 			};
 
-- 
2.1.4

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Vladimir Zapolskiy]

Hi Martin,

On 11/01/2018 07:32 PM, Martin Kaiser wrote:
> The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> function blocks. Add their ipg and per clocks to the device tree.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

the change is obviously correct.

Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>

--
Best wishes,
Vladimir

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Shawn Guo]

On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> function blocks. Add their ipg and per clocks to the device tree.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

Are these EPIT devices actually used in upstream kernel, or just
somewhere else?

Shawn

> ---
> 
> I tried to make this similar to gpt1 and gpt2.
> 
>  arch/arm/boot/dts/imx25.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> index b25309d26ea5..e80101847aff 100644
> --- a/arch/arm/boot/dts/imx25.dtsi
> +++ b/arch/arm/boot/dts/imx25.dtsi
> @@ -388,12 +388,16 @@
>  			epit1: timer at 53f94000 {
>  				compatible = "fsl,imx25-epit";
>  				reg = <0x53f94000 0x4000>;
> +				clocks = <&clks 83>, <&clks 43>;
> +				clock-names = "ipg", "per";
>  				interrupts = <28>;
>  			};
>  
>  			epit2: timer at 53f98000 {
>  				compatible = "fsl,imx25-epit";
>  				reg = <0x53f98000 0x4000>;
> +				clocks = <&clks 84>, <&clks 43>;
> +				clock-names = "ipg", "per";
>  				interrupts = <27>;
>  			};
>  
> -- 
> 2.1.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Vladimir Zapolskiy]

Adding Cl?ment.

On 11/04/2018 04:46 PM, Shawn Guo wrote:
> On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
>> The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
>> function blocks. Add their ipg and per clocks to the device tree.
>>
>> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> 
> Are these EPIT devices actually used in upstream kernel, or just
> somewhere else?

Cl?ment wrote a good driver, which has already passed a series of reviews,
but this clocks add-on is actually missing.

Cl?ment, can you please add clock-names property and the corresponding
functional change to your driver? Thank you in advance.

--
Best wishes,
Vladimir

>> ---
>>
>> I tried to make this similar to gpt1 and gpt2.
>>
>>  arch/arm/boot/dts/imx25.dtsi | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
>> index b25309d26ea5..e80101847aff 100644
>> --- a/arch/arm/boot/dts/imx25.dtsi
>> +++ b/arch/arm/boot/dts/imx25.dtsi
>> @@ -388,12 +388,16 @@
>>  			epit1: timer at 53f94000 {
>>  				compatible = "fsl,imx25-epit";
>>  				reg = <0x53f94000 0x4000>;
>> +				clocks = <&clks 83>, <&clks 43>;
>> +				clock-names = "ipg", "per";
>>  				interrupts = <28>;
>>  			};
>>  
>>  			epit2: timer at 53f98000 {
>>  				compatible = "fsl,imx25-epit";
>>  				reg = <0x53f98000 0x4000>;
>> +				clocks = <&clks 84>, <&clks 43>;
>> +				clock-names = "ipg", "per";
>>  				interrupts = <27>;
>>  			};
>>  
>> -- 
>> 2.1.4
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Clément Péron]

Hi,

On Mon, 5 Nov 2018 at 09:58, Vladimir Zapolskiy
<vladimir_zapolskiy@mentor.com> wrote:
>
> Adding Cl?ment.
>
> On 11/04/2018 04:46 PM, Shawn Guo wrote:
> > On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> >> The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> >> function blocks. Add their ipg and per clocks to the device tree.
> >>
> >> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> >
> > Are these EPIT devices actually used in upstream kernel, or just
> > somewhere else?
>
> Cl?ment wrote a good driver, which has already passed a series of reviews,
> but this clocks add-on is actually missing.
>
> Cl?ment, can you please add clock-names property and the corresponding
> functional change to your driver? Thank you in advance.

I'm converting it with the new timer-of framework, will check for
adding both clocks.

New patch should come this week I hope.

Regards,
Clement>
> --
> Best wishes,
> Vladimir
>
> >> ---
> >>
> >> I tried to make this similar to gpt1 and gpt2.
> >>
> >>  arch/arm/boot/dts/imx25.dtsi | 4 ++++
> >>  1 file changed, 4 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> >> index b25309d26ea5..e80101847aff 100644
> >> --- a/arch/arm/boot/dts/imx25.dtsi
> >> +++ b/arch/arm/boot/dts/imx25.dtsi
> >> @@ -388,12 +388,16 @@
> >>                      epit1: timer at 53f94000 {
> >>                              compatible = "fsl,imx25-epit";
> >>                              reg = <0x53f94000 0x4000>;
> >> +                            clocks = <&clks 83>, <&clks 43>;
> >> +                            clock-names = "ipg", "per";
> >>                              interrupts = <28>;
> >>                      };
> >>
> >>                      epit2: timer at 53f98000 {
> >>                              compatible = "fsl,imx25-epit";
> >>                              reg = <0x53f98000 0x4000>;
> >> +                            clocks = <&clks 84>, <&clks 43>;
> >> +                            clock-names = "ipg", "per";
> >>                              interrupts = <27>;
> >>                      };
> >>
> >> --
> >> 2.1.4
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel at lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Martin Kaiser]

Hi,

Thus wrote Shawn Guo (shawnguo at kernel.org):

> On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> > The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> > function blocks. Add their ipg and per clocks to the device tree.

> > Signed-off-by: Martin Kaiser <martin@kaiser.cx>

> Are these EPIT devices actually used in upstream kernel, or just
> somewhere else?

Until I saw Vladimir's mail this morning, I wasn't aware of any mainline
driver that's using the EPIT devices. I found that the clocks are
missing when I tried to use EPIT with a company-internal driver that's
not suitable for mainline integration.

Still, I think that merging this patch does no harm. If the EPIT devices
are present in the DT, we should add all resources they're using.

Thanks & best regards,

   Martin

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Shawn Guo]

On Mon, Nov 05, 2018 at 10:12:30AM +0100, Martin Kaiser wrote:
> Hi,
> 
> Thus wrote Shawn Guo (shawnguo at kernel.org):
> 
> > On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> > > The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> > > function blocks. Add their ipg and per clocks to the device tree.
> 
> > > Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> 
> > Are these EPIT devices actually used in upstream kernel, or just
> > somewhere else?
> 
> Until I saw Vladimir's mail this morning, I wasn't aware of any mainline
> driver that's using the EPIT devices. I found that the clocks are
> missing when I tried to use EPIT with a company-internal driver that's
> not suitable for mainline integration.
> 
> Still, I think that merging this patch does no harm. If the EPIT devices
> are present in the DT, we should add all resources they're using.

Agreed.  I will be happy to apply the patch if I can get an ACK from
Cl?ment saying this works with his driver in upstreaming.

Shawn

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Clément Péron]

Hi Shawn,

On Tue, 13 Nov 2018 at 15:42, Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Mon, Nov 05, 2018 at 10:12:30AM +0100, Martin Kaiser wrote:
> > Hi,
> >
> > Thus wrote Shawn Guo (shawnguo at kernel.org):
> >
> > > On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> > > > The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> > > > function blocks. Add their ipg and per clocks to the device tree.
> >
> > > > Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Cl?ment P?ron <peron.clem@gmail.com>
> >
> > > Are these EPIT devices actually used in upstream kernel, or just
> > > somewhere else?
> >
> > Until I saw Vladimir's mail this morning, I wasn't aware of any mainline
> > driver that's using the EPIT devices. I found that the clocks are
> > missing when I tried to use EPIT with a company-internal driver that's
> > not suitable for mainline integration.
> >
> > Still, I think that merging this patch does no harm. If the EPIT devices
> > are present in the DT, we should add all resources they're using.
>
> Agreed.  I will be happy to apply the patch if I can get an ACK from
> Cl?ment saying this works with his driver in upstreaming.

I have paused the dev of this driver for now, but this is fine for me.

Regards,
Clement

>
> Shawn

[PATCH] ARM: dts: i.MX25: add the clocks for the EPIT blocks

[Shawn Guo]

On Thu, Nov 01, 2018 at 06:32:47PM +0100, Martin Kaiser wrote:
> The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
> function blocks. Add their ipg and per clocks to the device tree.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

Applied, thanks.