linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: dbaryshkov@gmail.com (Dmitry Eremin-Solenikov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/17] leds: port locomo leds driver to new locomo core
Date: Tue, 9 Jun 2015 11:08:13 +0300	[thread overview]
Message-ID: <CALT56yMkpXqurNw9xQeEBTdH5UTsrmSHTx1jbWXTb8zSWwDD6Q@mail.gmail.com> (raw)
In-Reply-To: <20150609065730.GC2982@x1>

2015-06-09 9:57 GMT+03:00 Lee Jones <lee.jones@linaro.org>:
> On Mon, 08 Jun 2015, Dmitry Eremin-Solenikov wrote:
>
>> Adapt locomo leds driver to new locomo core setup.
>>
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
>> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
>
> This is missing Bryan's Ack.

Jacek is listed as a co-maintainer of the LEDS subsystem, so I assumed
that his acked-by is enough.

>
>> ---
>>  drivers/leds/Kconfig       |   2 +-
>>  drivers/leds/leds-locomo.c | 117 +++++++++++++++++++++++----------------------
>>  2 files changed, 61 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 966b960..d086aac 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -79,7 +79,7 @@ config LEDS_LM3642
>>  config LEDS_LOCOMO
>>       tristate "LED Support for Locomo device"
>>       depends on LEDS_CLASS
>> -     depends on SHARP_LOCOMO
>> +     depends on MFD_LOCOMO
>>       help
>>         This option enables support for the LEDs on Sharp Locomo.
>>         Zaurus models SL-5500 and SL-5600.
>> diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
>> index 80ba048..a4286e9 100644
>> --- a/drivers/leds/leds-locomo.c
>> +++ b/drivers/leds/leds-locomo.c
>> @@ -9,89 +9,92 @@
>>   */
>>
>>  #include <linux/kernel.h>
>> -#include <linux/init.h>
>> -#include <linux/module.h>
>> -#include <linux/device.h>
>>  #include <linux/leds.h>
>> +#include <linux/mfd/locomo.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>>
>> -#include <mach/hardware.h>
>> -#include <asm/hardware/locomo.h>
>> +struct locomo_led {
>> +     struct led_classdev led;
>> +     struct regmap *regmap;
>> +     unsigned int reg;
>> +};
>>
>>  static void locomoled_brightness_set(struct led_classdev *led_cdev,
>> -                             enum led_brightness value, int offset)
>> -{
>> -     struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
>> -     unsigned long flags;
>> -
>> -     local_irq_save(flags);
>> -     if (value)
>> -             locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
>> -     else
>> -             locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
>> -     local_irq_restore(flags);
>> -}
>> -
>> -static void locomoled_brightness_set0(struct led_classdev *led_cdev,
>>                               enum led_brightness value)
>>  {
>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
>> +     struct locomo_led *led = container_of(led_cdev, struct locomo_led, led);
>> +
>> +     regmap_write(led->regmap, led->reg,
>> +                     value ? LOCOMO_LPT_TOFH : LOCOMO_LPT_TOFL);
>>  }
>>
>> -static void locomoled_brightness_set1(struct led_classdev *led_cdev,
>> -                             enum led_brightness value)
>> +static int locomo_led_register(
>> +             struct device *dev,
>> +             struct locomo_led *led,
>> +             const char *name,
>> +             const char *trigger,
>> +             struct regmap *regmap,
>> +             unsigned int reg)
>>  {
>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
>> +     led->led.name = name;
>> +     led->led.flags = LED_CORE_SUSPENDRESUME;
>> +     led->led.default_trigger = trigger;
>> +     led->led.brightness_set = locomoled_brightness_set;
>> +     led->regmap = regmap;
>> +     led->reg = reg;
>> +
>> +     return devm_led_classdev_register(dev, &led->led);
>>  }
>>
>> -static struct led_classdev locomo_led0 = {
>> -     .name                   = "locomo:amber:charge",
>> -     .default_trigger        = "main-battery-charging",
>> -     .brightness_set         = locomoled_brightness_set0,
>> -};
>> -
>> -static struct led_classdev locomo_led1 = {
>> -     .name                   = "locomo:green:mail",
>> -     .default_trigger        = "nand-disk",
>> -     .brightness_set         = locomoled_brightness_set1,
>> -};
>> -
>> -static int locomoled_probe(struct locomo_dev *ldev)
>> +static int locomoled_probe(struct platform_device *pdev)
>>  {
>>       int ret;
>> -
>> -     ret = led_classdev_register(&ldev->dev, &locomo_led0);
>> +     struct locomo_led *leds;
>> +     struct regmap *regmap;
>> +
>> +     leds = devm_kzalloc(&pdev->dev, 2 * sizeof(*leds), GFP_KERNEL);
>> +     if (!leds)
>> +             return -ENOMEM;
>> +
>> +     regmap = dev_get_regmap(pdev->dev.parent, NULL);
>> +     if (!regmap)
>> +             return -ENODEV;
>> +
>> +     ret = locomo_led_register(
>> +                     &pdev->dev,
>> +                     leds,
>> +                     "locomo:amber:charge",
>> +                     "main-battery-charging",
>> +                     regmap,
>> +                     LOCOMO_LPT0);
>>       if (ret < 0)
>>               return ret;
>>
>> -     ret = led_classdev_register(&ldev->dev, &locomo_led1);
>> +     ret = locomo_led_register(
>> +                     &pdev->dev,
>> +                     leds + 1,
>> +                     "locomo:green:mail",
>> +                     "mmc0",
>> +                     regmap,
>> +                     LOCOMO_LPT1);
>>       if (ret < 0)
>> -             led_classdev_unregister(&locomo_led0);
>> -
>> -     return ret;
>> -}
>> +             return ret;
>>
>> -static int locomoled_remove(struct locomo_dev *dev)
>> -{
>> -     led_classdev_unregister(&locomo_led0);
>> -     led_classdev_unregister(&locomo_led1);
>>       return 0;
>>  }
>>
>> -static struct locomo_driver locomoled_driver = {
>> -     .drv = {
>> -             .name = "locomoled"
>> +static struct platform_driver locomoled_driver = {
>> +     .driver = {
>> +             .name = "locomo-led"
>>       },
>> -     .devid  = LOCOMO_DEVID_LED,
>>       .probe  = locomoled_probe,
>> -     .remove = locomoled_remove,
>>  };
>>
>> -static int __init locomoled_init(void)
>> -{
>> -     return locomo_driver_register(&locomoled_driver);
>> -}
>> -module_init(locomoled_init);
>> +module_platform_driver(locomoled_driver);
>>
>>  MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
>>  MODULE_DESCRIPTION("Locomo LED driver");
>>  MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:locomo-led");
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org ? Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog



-- 
With best wishes
Dmitry

  reply	other threads:[~2015-06-09  8:08 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08 20:56 [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 01/17] mfd: add new driver for Sharp LoCoMo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 02/17] leds: port locomo leds driver to new locomo core Dmitry Eremin-Solenikov
2015-06-09  6:57   ` Lee Jones
2015-06-09  8:08     ` Dmitry Eremin-Solenikov [this message]
2015-06-09 11:11       ` Lee Jones
2015-06-09 11:35         ` Jacek Anaszewski
2015-06-09 18:51           ` Lee Jones
2015-06-15 18:43       ` Bryan Wu
2015-06-08 20:56 ` [PATCH v5 03/17] input: convert LoCoMo keyboard driver to use " Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 04/17] input: locomokbd: differentiate between two Enter keys Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 05/17] input: make LoCoMo keyboard driver support both poodle and collie Dmitry Eremin-Solenikov
2015-06-14 15:11   ` Russell King - ARM Linux
2015-06-14 16:26     ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 06/17] video: backlight: add new locomo backlight driver Dmitry Eremin-Solenikov
2015-06-14 15:13   ` Russell King - ARM Linux
2015-06-14 16:17     ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 07/17] video: lcd: add LoCoMo LCD driver Dmitry Eremin-Solenikov
2015-06-14 15:18   ` Russell King - ARM Linux
2015-06-14 16:28     ` Dmitry Eremin-Solenikov
2015-06-14 17:16       ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 08/17] gpio: port LoCoMo gpio support from old driver Dmitry Eremin-Solenikov
2015-06-14 15:27   ` Russell King - ARM Linux
2016-05-11  8:34     ` Linus Walleij
2015-06-08 20:56 ` [PATCH v5 09/17] gpio: locomo: implement per-pin irq handling Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 10/17] i2c: add locomo i2c driver Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 11/17] ARM: sa1100: make collie use new locomo drivers Dmitry Eremin-Solenikov
2015-06-14 15:06   ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 12/17] ARM: sa1100: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 13/17] ASoC: pxa: poodle: make use of new locomo GPIO interface Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 14/17] ARM: pxa: poodle: use new LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 15:08   ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 15/17] ARM: pxa: poodle: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 16/17] video: backlight: drop old locomo bl/lcd driver Dmitry Eremin-Solenikov
2015-06-09  6:55   ` Lee Jones
2015-06-08 20:56 ` [PATCH v5 17/17] ARM: drop old LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 13:16 ` [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALT56yMkpXqurNw9xQeEBTdH5UTsrmSHTx1jbWXTb8zSWwDD6Q@mail.gmail.com \
    --to=dbaryshkov@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).