[PATCH v2 0/4] Fix MediaTek display dt-bindings issues

[PATCH v2 0/4] Fix MediaTek display dt-bindings issues

[jason-jh.lin]

The vdosys0 series carried a nice dt-bindings conversion of the old
txt documentation for the entire mediatek-drm driver, but some of
the issues in there weren't seen.

This series is fixing all of the issues pointed out by a
`dt_binding_check` run, followed by `dtbs_check`.

Change in v2:
- remove mediatek,ethdr.yaml file
- change include header of mediatek,ovl-2l.yaml from mt8173 to mt8183

AngeloGioacchino Del Regno (3):
  dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type
  dt-bindings: display: mediatek, ovl: Fix 'iommu' required property
    typo
  dt-bindings: display: mediatek: Fix examples on new bindings

jason-jh.lin (1):
  Revert "dt-bindings: display: mediatek: add ethdr definition for
    mt8195"

 .../display/mediatek/mediatek,aal.yaml        |  23 ++-
 .../display/mediatek/mediatek,ccorr.yaml      |  23 ++-
 .../display/mediatek/mediatek,color.yaml      |  23 ++-
 .../display/mediatek/mediatek,dither.yaml     |  23 ++-
 .../display/mediatek/mediatek,dpi.yaml        |   3 +-
 .../display/mediatek/mediatek,dsc.yaml        |  23 ++-
 .../display/mediatek/mediatek,ethdr.yaml      | 147 ------------------
 .../display/mediatek/mediatek,gamma.yaml      |  23 ++-
 .../display/mediatek/mediatek,merge.yaml      |  49 +++---
 .../display/mediatek/mediatek,mutex.yaml      |  27 ++--
 .../display/mediatek/mediatek,od.yaml         |  14 +-
 .../display/mediatek/mediatek,ovl-2l.yaml     |  26 +++-
 .../display/mediatek/mediatek,ovl.yaml        |  28 ++--
 .../display/mediatek/mediatek,postmask.yaml   |  23 ++-
 .../display/mediatek/mediatek,rdma.yaml       |  28 ++--
 .../display/mediatek/mediatek,split.yaml      |  17 +-
 .../display/mediatek/mediatek,ufoe.yaml       |  19 ++-
 .../display/mediatek/mediatek,wdma.yaml       |  26 +++-
 18 files changed, 262 insertions(+), 283 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml

-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/4] Revert "dt-bindings: display: mediatek: add ethdr definition for mt8195"

[jason-jh.lin]

This reverts commit e7dcfe64204a5cd9a74a9ca7d9c7a22434dc7fe5.

Because examples property of mediatek,ethdr.yaml should base on [1][2].
Reverting it until [1][2] are applied.

[1] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/
[2] dt-bindings: reset: mt8195: add vdosys1 reset control bit
https://patchwork.kernel.org/project/linux-mediatek/patch/20220222100741.30138-5-nancy.lin@mediatek.com/

Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
---
 .../display/mediatek/mediatek,ethdr.yaml      | 147 ------------------
 1 file changed, 147 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
deleted file mode 100644
index 131eed5eeeb7..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ /dev/null
@@ -1,147 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek Ethdr Device Tree Bindings
-
-maintainers:
-  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
-  - Philipp Zabel <p.zabel@pengutronix.de>
-
-description: |
-  ETHDR is designed for HDR video and graphics conversion in the external display path.
-  It handles multiple HDR input types and performs tone mapping, color space/color
-  format conversion, and then combine different layers, output the required HDR or
-  SDR signal to the subsequent display path. This engine is composed of two video
-  frontends, two graphic frontends, one video backend and a mixer. ETHDR has two
-  DMA function blocks, DS and ADL. These two function blocks read the pre-programmed
-  registers from DRAM and set them to HW in the v-blanking period.
-
-properties:
-  compatible:
-    items:
-      - const: mediatek,mt8195-disp-ethdr
-  reg:
-    maxItems: 7
-  reg-names:
-    items:
-      - const: mixer
-      - const: vdo_fe0
-      - const: vdo_fe1
-      - const: gfx_fe0
-      - const: gfx_fe1
-      - const: vdo_be
-      - const: adl_ds
-  interrupts:
-    minItems: 1
-  iommus:
-    description: The compatible property is DMA function blocks.
-      Should point to the respective IOMMU block with master port as argument,
-      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for
-      details.
-    minItems: 1
-    maxItems: 2
-  clocks:
-    items:
-      - description: mixer clock
-      - description: video frontend 0 clock
-      - description: video frontend 1 clock
-      - description: graphic frontend 0 clock
-      - description: graphic frontend 1 clock
-      - description: video backend clock
-      - description: autodownload and menuload clock
-      - description: video frontend 0 async clock
-      - description: video frontend 1 async clock
-      - description: graphic frontend 0 async clock
-      - description: graphic frontend 1 async clock
-      - description: video backend async clock
-      - description: ethdr top clock
-  clock-names:
-    items:
-      - const: mixer
-      - const: vdo_fe0
-      - const: vdo_fe1
-      - const: gfx_fe0
-      - const: gfx_fe1
-      - const: vdo_be
-      - const: adl_ds
-      - const: vdo_fe0_async
-      - const: vdo_fe1_async
-      - const: gfx_fe0_async
-      - const: gfx_fe1_async
-      - const: vdo_be_async
-      - const: ethdr_top
-  power-domains:
-    maxItems: 1
-  resets:
-    maxItems: 5
-  mediatek,gce-client-reg:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: The register of display function block to be set by gce.
-      There are 4 arguments in this property, gce node, subsys id, offset and
-      register size. The subsys id is defined in the gce header of each chips
-      include/include/dt-bindings/gce/<chip>-gce.h, mapping to the register of
-      display function block.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - interrupts
-  - power-domains
-
-additionalProperties: false
-
-examples:
-  - |
-
-    disp_ethdr@1c114000 {
-            compatible = "mediatek,mt8195-disp-ethdr";
-            reg = <0 0x1c114000 0 0x1000>,
-                  <0 0x1c115000 0 0x1000>,
-                  <0 0x1c117000 0 0x1000>,
-                  <0 0x1c119000 0 0x1000>,
-                  <0 0x1c11A000 0 0x1000>,
-                  <0 0x1c11B000 0 0x1000>,
-                  <0 0x1c11C000 0 0x1000>;
-            reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
-                        "vdo_be", "adl_ds";
-            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0xA000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0xB000 0x1000>,
-                                      <&gce0 SUBSYS_1c11XXXX 0xC000 0x1000>;
-            clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
-                     <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
-                     <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
-                     <&vdosys1 CLK_VDO1_26M_SLOW>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
-                     <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
-                     <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
-                     <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
-                     <&topckgen CLK_TOP_ETHDR_SEL>;
-            clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
-                          "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
-                          "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
-                          "ethdr_top";
-            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-            iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
-                     <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
-            interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
-            resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
-                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
-                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
-                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
-                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
-    };
-
-...
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/4] dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type

[jason-jh.lin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

The mediatek,gce-events property needs as value an array of uint32
corresponding to the CMDQ events to listen to, and not any phandle.

Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,mutex.yaml    | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
index 6eca525eced0..842ba7b07a34 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
@@ -58,7 +58,7 @@ properties:
       The event id which is mapping to the specific hardware event signal
       to gce. The event id is defined in the gce header
       include/dt-bindings/gce/<chip>-gce.h of each chips.
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
 required:
   - compatible
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/4] dt-bindings: display: mediatek, ovl: Fix 'iommu' required property typo

[jason-jh.lin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

The property is called 'iommus' and not 'iommu'. Fix this typo.

Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,ovl.yaml      | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index 93d5c68a2dbd..fc691d00c60e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -75,7 +75,7 @@ required:
   - interrupts
   - power-domains
   - clocks
-  - iommu
+  - iommus
 
 additionalProperties: false
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/4] dt-bindings: display: mediatek: Fix examples on new bindings

[jason-jh.lin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

To avoid failure of dt_binding_check perform a slight refactoring
of the examples: the main block is kept, but that required fixing
the address and size cells, plus the inclusion of missing dt-bindings
headers, required to parse some of the values assigned to various
properties.

Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: jason-jh.lin <jason-jh.lin@medaitek.com>
---
 .../display/mediatek/mediatek,aal.yaml        | 23 ++++++---
 .../display/mediatek/mediatek,ccorr.yaml      | 23 ++++++---
 .../display/mediatek/mediatek,color.yaml      | 23 ++++++---
 .../display/mediatek/mediatek,dither.yaml     | 23 ++++++---
 .../display/mediatek/mediatek,dpi.yaml        |  3 +-
 .../display/mediatek/mediatek,dsc.yaml        | 23 ++++++---
 .../display/mediatek/mediatek,gamma.yaml      | 23 ++++++---
 .../display/mediatek/mediatek,merge.yaml      | 49 +++++++++----------
 .../display/mediatek/mediatek,mutex.yaml      | 25 +++++++---
 .../display/mediatek/mediatek,od.yaml         | 14 ++++--
 .../display/mediatek/mediatek,ovl-2l.yaml     | 26 +++++++---
 .../display/mediatek/mediatek,ovl.yaml        | 26 +++++++---
 .../display/mediatek/mediatek,postmask.yaml   | 23 ++++++---
 .../display/mediatek/mediatek,rdma.yaml       | 28 +++++++----
 .../display/mediatek/mediatek,split.yaml      | 17 +++++--
 .../display/mediatek/mediatek,ufoe.yaml       | 19 ++++---
 .../display/mediatek/mediatek,wdma.yaml       | 26 +++++++---
 17 files changed, 260 insertions(+), 134 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 225f9dd726d2..61f0ed1e388f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -66,12 +66,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
 
-    aal@14015000 {
-        compatible = "mediatek,mt8173-disp-aal";
-        reg = <0 0x14015000 0 0x1000>;
-        interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_AAL>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+           compatible = "mediatek,mt8173-disp-aal";
+           reg = <0 0x14015000 0 0x1000>;
+           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+           clocks = <&mmsys CLK_MM_DISP_AAL>;
+           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+       };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 6894b6999412..0ed53b6238f0 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -65,12 +65,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
 
-    ccorr0: ccorr@1400f000 {
-        compatible = "mediatek,mt8183-disp-ccorr";
-        reg = <0 0x1400f000 0 0x1000>;
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-        clocks = <&mmsys CLK_MM_DISP_CCORR0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index bc83155b3b4c..3ad842eb5668 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -75,12 +75,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
 
-    color0: color@14013000 {
-        compatible = "mediatek,mt8173-disp-color";
-        reg = <0 0x14013000 0 0x1000>;
-        interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_COLOR0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
index 9d89297f5f1d..6657549af165 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -65,12 +65,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
 
-    dither0: dither@14012000 {
-        compatible = "mediatek,mt8183-disp-dither";
-        reg = <0 0x14012000 0 0x1000>;
-        interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-        clocks = <&mmsys CLK_MM_DISP_DITHER0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..843f89d6053f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -70,8 +70,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
+
     dpi0: dpi@1401d000 {
         compatible = "mediatek,mt8173-dpi";
         reg = <0x1401d000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
index 1ec083eff824..49248864514b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -60,12 +60,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
 
-    dsc0: disp_dsc_wrap@1c009000 {
-        compatible = "mediatek,mt8195-disp-dsc";
-        reg = <0 0x1c009000 0 0x1000>;
-        interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
-        power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
-        clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
-        mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index 247baad147b3..78442339314f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -66,12 +66,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
 
-    gamma@14016000 {
-        compatible = "mediatek,mt8173-disp-gamma";
-        reg = <0 0x14016000 0 0x1000>;
-        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_GAMMA>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index d5cd69b7f501..d635c5dcb68b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -38,18 +38,16 @@ properties:
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
 
   clocks:
+    minItems: 1
     maxItems: 2
-    items:
-      - description: MERGE Clock
-      - description: MERGE Async Clock
-          Controlling the synchronous process between MERGE and other display
-          function blocks cross clock domain.
 
   clock-names:
-    maxItems: 2
-    items:
-      - const: merge
-      - const: merge_async
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
 
   mediatek,merge-fifo-en:
     description:
@@ -88,23 +86,20 @@ additionalProperties: false
 
 examples:
   - |
-
-    merge@14017000 {
-        compatible = "mediatek,mt8173-disp-merge";
-        reg = <0 0x14017000 0 0x1000>;
-        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_MERGE>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
     };
 
-    merge5: disp_vpp_merge5@1c110000 {
-        compatible = "mediatek,mt8195-disp-merge";
-        reg = <0 0x1c110000 0 0x1000>;
-        interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
-        clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
-                 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
-        clock-names = "merge","merge_async";
-        power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-        mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
-        mediatek,merge-fifo-en = <1>;
-        resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
-    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
index 842ba7b07a34..00e6a1041a9b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml
@@ -71,13 +71,22 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
 
-    mutex: mutex@14020000 {
-        compatible = "mediatek,mt8173-disp-mutex";
-        reg = <0 0x14020000 0 0x1000>;
-        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_MUTEX_32K>;
-        mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
-                              <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 7519db315217..853fcb9db2be 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -45,9 +45,15 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/mt8173-clk.h>
 
-    od@14023000 {
-        compatible = "mediatek,mt8173-disp-od";
-        reg = <0 0x14023000 0 0x1000>;
-        clocks = <&mmsys CLK_MM_DISP_OD>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
index e3cef99d0f98..da999ba53b7c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -66,13 +66,23 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    ovl_2l0: ovl@14009000 {
-        compatible = "mediatek,mt8183-disp-ovl-2l";
-        reg = <0 0x14009000 0 0x1000>;
-        interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-        clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
-        iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index fc691d00c60e..f77094e61443 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -81,13 +81,23 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
 
-    ovl0: ovl@1400c000 {
-        compatible = "mediatek,mt8173-disp-ovl";
-        reg = <0 0x1400c000 0 0x1000>;
-        interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_OVL0>;
-        iommus = <&iommu M4U_PORT_DISP_OVL0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
index 6ac1da2e8871..2d769422e29f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -58,12 +58,21 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
 
-    postmask0: postmask@1400d000 {
-        compatible = "mediatek,mt8192-disp-postmask";
-        reg = <0 0x1400d000 0 0x1000>;
-        interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
-        power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
-        clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index b56e22fbcd52..e8c72afa0630 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -94,14 +94,24 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
 
-    rdma0: rdma@1400e000 {
-        compatible = "mediatek,mt8173-disp-rdma";
-        reg = <0 0x1400e000 0 0x1000>;
-        interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_RDMA0>;
-        iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-        mediatek,rdma-fifosize = <8192>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index 4f08e89c1067..35ace1f322e8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -49,10 +49,17 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
 
-    split0: split@14018000 {
-        compatible = "mediatek,mt8173-disp-split";
-        reg = <0 0x14018000 0 0x1000>;
-        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 6e8748529e73..b8bb135fe96b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -51,11 +51,18 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
 
-    ufoe@1401a000 {
-        compatible = "mediatek,mt8173-disp-ufoe";
-        reg = <0 0x1401a000 0 0x1000>;
-        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
index f9f00a518edf..7d7cc1ab526b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -64,13 +64,23 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
 
-    wdma0: wdma@14011000 {
-        compatible = "mediatek,mt8173-disp-wdma";
-        reg = <0 0x14011000 0 0x1000>;
-        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
-        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-        clocks = <&mmsys CLK_MM_DISP_WDMA0>;
-        iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
     };
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/4] Fix MediaTek display dt-bindings issues

[Rob Herring]

On Wed, Mar 9, 2022 at 7:47 AM jason-jh.lin <jason-jh.lin@mediatek.com> wrote:
>
> The vdosys0 series carried a nice dt-bindings conversion of the old
> txt documentation for the entire mediatek-drm driver, but some of
> the issues in there weren't seen.
>
> This series is fixing all of the issues pointed out by a
> `dt_binding_check` run, followed by `dtbs_check`.
>
> Change in v2:
> - remove mediatek,ethdr.yaml file
> - change include header of mediatek,ovl-2l.yaml from mt8173 to mt8183
>
> AngeloGioacchino Del Regno (3):
>   dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type
>   dt-bindings: display: mediatek, ovl: Fix 'iommu' required property
>     typo
>   dt-bindings: display: mediatek: Fix examples on new bindings
>
> jason-jh.lin (1):
>   Revert "dt-bindings: display: mediatek: add ethdr definition for
>     mt8195"

Can this series get applied soon? linux-next is still broken.

If it hits Linus' tree, I will be applying them.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/4] Fix MediaTek display dt-bindings issues

[Chun-Kuang Hu]

Hi, Rob:

Rob Herring <robh@kernel.org> 於 2022年3月23日 週三 下午10:10寫道：
>
> On Wed, Mar 9, 2022 at 7:47 AM jason-jh.lin <jason-jh.lin@mediatek.com> wrote:
> >
> > The vdosys0 series carried a nice dt-bindings conversion of the old
> > txt documentation for the entire mediatek-drm driver, but some of
> > the issues in there weren't seen.
> >
> > This series is fixing all of the issues pointed out by a
> > `dt_binding_check` run, followed by `dtbs_check`.
> >
> > Change in v2:
> > - remove mediatek,ethdr.yaml file
> > - change include header of mediatek,ovl-2l.yaml from mt8173 to mt8183
> >
> > AngeloGioacchino Del Regno (3):
> >   dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type
> >   dt-bindings: display: mediatek, ovl: Fix 'iommu' required property
> >     typo
> >   dt-bindings: display: mediatek: Fix examples on new bindings
> >
> > jason-jh.lin (1):
> >   Revert "dt-bindings: display: mediatek: add ethdr definition for
> >     mt8195"
>
> Can this series get applied soon? linux-next is still broken.
>
> If it hits Linus' tree, I will be applying them.

I've applied this series to my tree [1], but now is merge window, so I
plan to send this series through Dave's tree after 5.18-rc1. Would
this be too late for you?

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-fixes

Regards,
Chun-Kuang.

>
> Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/4] Fix MediaTek display dt-bindings issues

[Rob Herring]

On Thu, Mar 24, 2022 at 09:25:44PM +0800, Chun-Kuang Hu wrote:
> Hi, Rob:
> 
> Rob Herring <robh@kernel.org> 於 2022年3月23日 週三 下午10:10寫道：
> >
> > On Wed, Mar 9, 2022 at 7:47 AM jason-jh.lin <jason-jh.lin@mediatek.com> wrote:
> > >
> > > The vdosys0 series carried a nice dt-bindings conversion of the old
> > > txt documentation for the entire mediatek-drm driver, but some of
> > > the issues in there weren't seen.
> > >
> > > This series is fixing all of the issues pointed out by a
> > > `dt_binding_check` run, followed by `dtbs_check`.
> > >
> > > Change in v2:
> > > - remove mediatek,ethdr.yaml file
> > > - change include header of mediatek,ovl-2l.yaml from mt8173 to mt8183
> > >
> > > AngeloGioacchino Del Regno (3):
> > >   dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type
> > >   dt-bindings: display: mediatek, ovl: Fix 'iommu' required property
> > >     typo
> > >   dt-bindings: display: mediatek: Fix examples on new bindings
> > >
> > > jason-jh.lin (1):
> > >   Revert "dt-bindings: display: mediatek: add ethdr definition for
> > >     mt8195"
> >
> > Can this series get applied soon? linux-next is still broken.
> >
> > If it hits Linus' tree, I will be applying them.
> 
> I've applied this series to my tree [1], but now is merge window, so I
> plan to send this series through Dave's tree after 5.18-rc1. Would
> this be too late for you?

Yes, people base their development on -rc1 and it would be nice to have 
a functional tree.

There's not really any need to wait to send fixes.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel